• 제목/요약/키워드: Rock Weathering

검색결과 414건 처리시간 0.024초

풍화에 의한 퇴적암의 물리-화학적 변화 (Physical and Chemical Variation of Sedimentary Rocks due to Weathering)

  • 김영수;허노영;정우섭;예대호;이재호
    • 한국지반환경공학회 논문집
    • /
    • 제3권2호
    • /
    • pp.49-60
    • /
    • 2002
  • 퇴적암의 풍화특성을 파악하기 위해서는 풍화과정을 지배하는 암석의 광물조성과 화학성분에 대한 연구가 필요하다. 본 논문에서는 풍화정도에 따른 퇴적암의 특성을 고찰하기 위해서 대구지역에 분포하고 있는 퇴적암을 채취하여 화학 및 광물성분 분석과 물리 및 역학특성 시험을 실시하였다. 화학적풍화지수와 감열감량, 흡수율과 일축압축강도, 풍화지수와 일축압축강도가 좋은 상관관계를 나타내었으며 모암에 함유된 $A_2O_3$, CaO, $Na_2O$, $K_2O$, MgO 등의 화학성분과 조장석(Albite, Ab), 백운모(Muscovite, Ms), 마그네타이트(Magenetite, Mt)등의 광물성분이 풍화와 밀접한 관계가 있었다. 이 시험결과를 토대로 하여 퇴적암에 적용할 수 있는 정량적인 풍화도판정법의 적용성을 제시하자고 하였다.

  • PDF

제주도 한라산조면암의 풍화특성에 관한 연구 (A Study of Weathering Characteristic of Baeknokdam Trachyte in Jeju Island)

  • 이창섭;조태진;이상배;원경식
    • 지질공학
    • /
    • 제17권2호
    • /
    • pp.235-251
    • /
    • 2007
  • 한라산 정상부의 백록담 암체는 백록담조면현무암이 분포하는 동측구역과 한라산조면암이 분포하는 서측구역으로 구분된다. 백록담에서 진행되는 풍화, 암벽붕괴, 낙반은 전반적으로 백록담 서측구역에 분포하는 한라산 조면암의 풍화작용과 밀접한 연관성을 가지며, 동측구역에서는 개별 암석 블록들의 국지적 붕락현상이 발생한다. 본 연구에서는 한라산조 면암 분포지역의 지질학적 및 지형학적 특성을 조사하였으며, 풍화단계별로 조면암 시료를 채취하여 편광현미경분석, X-선 회절분석, 전자현미경관찰, 지화학분석, 공학적 물성시험 등을 수행하였다. 실험결과에 의거하여 한라산조면암의 광물 암석학적 특성변화, 화학적 특성변화와 물리적 특성변화를 분석하였으며, 백록담을 구성하는 조면암체의 풍화특성과 원인을 조사하여 풍화 메커니즘을 고찰하였다.

감은사지 3층 석탑(동탑)과 나원리 5층 석탑의 암석과 풍화현상의 특징에 대한 연구 (Characteristics of the rocks and its weathering phenomena of the Gameunsa 3-story and Naweonri 5-story Pagodas located at the Kyeongju city, Korea)

  • 이상헌
    • 보존과학회지
    • /
    • 제5권1호
    • /
    • pp.20-40
    • /
    • 1996
  • For obtaining the basic data for establishing plan on the conservation of the Gameunsa 3-story and Naweonri 5-story Pagodas located at the Kyeongju city, the characteristics of the rock and weathering phenomena have been investigated. The former consists of quartz-rlch granite containing small amount of biotite, and the latter of alkali granite with abundant perthite, These rock phases are nearly identical to the marginal phase of medium-grained hornblende-biotite granodiorite and alkali granite respectively, which are distributed around the Kyeongju city. The rock weathering may be governed mainly by chemical weathering of feldspar following physical segregation of quartz grains and pervasive moss. The feldspar easily dissolve In the solution with pH<7 to precipitate clay mineral such as a kaolinite as a secondary phase on the feldspar surface. However, the chemical weathering of feldspar may continue when the surface is washed by the rain according to removal of the reprecipitated phase. On forwarding, the weathering may be greatly Influenced by the acid rain. Exfoliation and weathering along igneous lineation resulting in exfoliating along the structural line are the characteristic weathering phenomena. Also the secondary small cracks are irregularly developed on the rocks due to different strain on places by the overall structural unbalance of the pagodas. Along these cracks, the rain water intrudes deeply into the rocks and weathering occurs intensively compared to other parts. Weathering may be artificially promoted by the grinding or sculpturing when the pagodas were made. Because it may influence on the physical properties of the rocks as well as destruct the surface of the feldspar crystals, the major constituents of the rocks, it results in providing the environment of easy chemical weathering along time. For conservation, the pagodas must be structurally balanced by compacting the soil basement and supplementing rocks on the destroyed part. On the exfoliated part it is better not to be artifically treated as using cementing material. But the cracks may be filled up by cementing material to avoid the intrusion of acidic water. To supplement the rocks on the destroyed part, it may be better to use similar rock phases from identical biotite granite and alkali granite masses around the Kyeongju city.

  • PDF

Geophysical and mechanical investigation of different environmental effects on a red-bed soft rock dam foundation

  • Liming Zhou;Yujie Li;Fagang Wang;Yang Liu
    • Geomechanics and Engineering
    • /
    • 제34권2호
    • /
    • pp.139-154
    • /
    • 2023
  • Red-bed soft rock is a common stratum and it is necessary to evaluate the mechanical properties and bearing capacity of red-bed soft rock mass affected by different environmental effects. This paper presents a complete procedure for evaluating the bearing capacity of red-bed soft rock by means of geophysical exploration and in-situ rock mechanics tests. Firstly, the thickness of surface loosened rock mass of red-bed soft rock was determined using geophysical prospecting method. Then, three environmental effects, including natural weathering effect, dry-wet cycling effect and concrete sealing effect, were considered. After each effect lasted for three months, in-situ rock mass mechanical tests were conducted. The test results show that the mechanical properties of rock mass considering the sealing effect of concrete were maintained. After considering the natural weathering effect, the mechanical parameters decrease to a certain extent. After considering the effect of dry-wet cycling, the decreases of mechanical parameters are the most significant. The test results confirm that the red-bed soft rock dam foundation rock mass will be significantly affected by various environmental effects. Therefore, combined with the mechanical test results, some useful implementations are proposed for the construction of a red-bed soft rock dam foundation.

경상분지 셰일 지역에서의 절토사면 파괴 특성 (Failure Characteristics of Cut Slopes of Shale in Ky ngsang Basin)

  • 김경석;유병옥;이상돈
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2002년도 암반역학위원회 학술세미나 논문집
    • /
    • pp.103-114
    • /
    • 2002
  • Stability of cut-slope is considered to have a deep relationship with rock types since rock has its own engineering and geological characteristic such as shear strength, durability, weathering profile, geological structures. Therefore, analysis of geological and engineering characterisics of rock mass is essential for the evaluation of rock slope stability This paper introduces the statistical data of slope failure cases which was collected from highway slopes constructed in sedimentary rock mainly of shale in Ky ng-sang Basin. Primary failure feature in this area is planar failure along the bedding regardless of slope geometry. Even a disasterous slope failure case due to the thick clay layer between the beddings was reported. Failures and rock fall were reported to ocurred frequently after the completion of cutting due to the weathering, so long-term slope stability should be considered as a important factors in design.

  • PDF

국내 쇄설성 퇴적암의 화학적 풍화지수 고찰 (Chemical Weathering Index of Clastic Sedimentary Rocks in Korea)

  • 김성욱;최은경;김종우;김태형;이규환
    • 지질공학
    • /
    • 제27권1호
    • /
    • pp.67-79
    • /
    • 2017
  • 암석내 화학종의 함량을 이용한 풍화지수는 암석의 풍화 정도와 2차 광물의 생성을 예측하는데 매우 효과적이다. 풍화의 과정은 암석의 종류에 따라 다르게 나타나는데 국내의 경우 화강암의 분포 면적이 넓은 이유로 풍화지수의 연구는 산성질 화성암에 편중되어 왔다. 이 연구는 쇄설성 퇴적암에 속하는 사암, 이암, 셰일의 전암분석(X-선 형광분석)을 이용하여 풍화지수들을 산정하고, 상관성 분석을 통해 지수들의 유의성을 검토하였다. 쇄설성 퇴적암 중 장석의 비중이 높게 나타나는 사암과 셰일의 경우 장석의 풍화를 나타내주는 Wp, CIA, CIW, PIA 풍화지수가 높은 유의성을 보였다. 화학적 변질지수(CIA)는 풍화경로와 변질점토의 생성을 예측할 수 있는 장점이 있으나 풍화 정도의 변별력을 높이기 위해 화학적 풍화지수를 동시에 고려하는 것이 효과적이다. 탄산염 계열의 광물이 포함된 경우 이에 대한 효과를 산정식을 통해 제거하지 못하였고 정확한 풍화지수 산정을 위해 X-선 회절분석 등을 통해 탄산염 물질의 함량이 높은 시료는 분석과정에서 배제해야 한다.

화강암 파쇄시 풍화정도가 골재 입도분포 및 미석분 발생에 미치는 영향 (Effect of the Degree of Weathering on the Distribution of Aggregate Particle Size and the Generation of Fine Rock Particles during Crushing of Granite)

  • 유병운;이진영;이동길;정영욱
    • 자원환경지질
    • /
    • 제55권5호
    • /
    • pp.429-438
    • /
    • 2022
  • 본 연구는 골재 생산과정에서 화감암 파쇄시 풍화정도가 골재의 입도분포 및 미석분 발생량에 미치는 영향을 평가하였다. 경북 거창의 골재 채석장에서 슈미스 햄머 측정값으로 강도 차가 있는 3개 지역에서 암석 시료를 채취하였다. 실내에서 동일 조건에서 죠크러셔로 파쇄를 한 후 입도분석, 광물 분석, 화학분석과 풍화지수를 산출했다. 슈미트 햄머 측정값은 56, 28, <10로 나타났고 풍화지수인 CIA 및 CIW 값도 차이가 나타나 시료들을 풍화도에 따라서 경암, 연암 및 풍화암으로 구분했다. 경하에서 풍화암으로 갈수록 작은 입도분포를 보이며, 변질광물로 견운모와 같은 점토광물의 비율이 높아졌다. 경암은 장석 및 석영 비율이 높았고 백운모 및 고령석(kaolinite)의 비가 작았다. 죠크러셔 파쇄 결과 경암은 굵은 파쇄물(13.2mm)을 많이 생산한 반면 풍화가 진행된 연암 및 풍화암은 가는 파쇄물(4.75mm)을 생산했다. 전자는 베타분포 곡선 특징을 보였고 후자는 쌍봉 분포 곡선을 보였다. 미석분(0.71mm 체 이하; 중량 %) 발생은 경암, 연암, 풍화암에서 13%<21%<22%로 증가하여 풍화도가 클수록 미석분이 많이 발생했다. 미석분은 습식 골재 생산 공정에서 샌드 유닛(모래탈수장치)의 운전으로 회수된다. 따라서 골재생산 공정에서 슬러지 발생량을 최소화하기 위해 사이클론의 최적 운전에 대한 연구가 필요할 것으로 판단되었다.

강원도 원주일대에 분포하는 화강암 및 화강편마암의 화학풍화실험에 의한 물성 변화 연구 (Variation of Geomechanical Characteristics of Granite and Orthogneiss in Wonju Area due to Accelerated Artificial Chemical Weathering Tests)

  • 우익;엄정기;박혁진
    • 터널과지하공간
    • /
    • 제19권3호
    • /
    • pp.213-225
    • /
    • 2009
  • 본 연구는 실내 화학풍화실험을 통하여 원주일대에 분포하는 화강암 및 화강편마암의 화학적 풍화특성을 평가하는데 목적이 있다. 이를 위하여 이중속실렛추출장치를 이용하여 170여일간의 용탈실험을 수행하고 연구 지역 암석의 화학적 풍화작용에 의한 원소 이동과 물성변화를 측정하였다. 풍화에 따른 구성광물의 반응정도에 따른 차별적 풍화침투와 P파속도의 전반적인 감소가 관찰되었으나, 공극률의 변화는 거의 없는 것으로 확인되었다. 화학풍화실험에 따른 화강암의 일축압축강도는 F 등급에서 20%, SW 등급에서 16% 정도 감소되는 것으로 나타났다. 연구지역에 분포한 화강편마암의 경우에는 뚜렷한 이방성에 의한 일축압축강도의 편차로 인하여 풍화에 따른 암석강도의 저감효과를 평가하기 어렵다. 연구지역에 대한 중 장기적인 풍화 예측을 위해서는 화학적 풍화와 더불어 물리적 풍화가 병행된 조건에서의 고찰 필요하며 앞으로도 심도있는 후속 연구가 요구된다.

인공풍화시험을 이용한 암종별 풍화특성 평가 (Evaluation on Weathering Characterization on Rock Types Using Artificial Weathering Test)

  • 허열;강창우;권영철;배우석
    • 한국지반환경공학회 논문집
    • /
    • 제18권8호
    • /
    • pp.23-32
    • /
    • 2017
  • 노출된 비탈면은 시간에 따른 풍화도가 암반의 공학적인 성질과 비탈면의 안정성에 주요한 영향을 미치게 된다. 풍화는 시간의 경과에 따라 암석을 토양으로 점진적으로 변화시키며, 이로 인한 암석의 물리적, 화학적, 역학적인 변화는 비탈면의 공학적인 안정에 영향을 미친다. 그러나 비탈면의 풍화도를 객관적으로 평가할 수 있는 방법은 많지 않은 것이 현실이다. 따라서 본 연구에서는 암석의 풍화특성을 규명하기 위해 충북지역에 분포하고 있는 화강암과 편마암, 셰일을 대상으로 풍화 단계별로 시료를 채취하고 조성광물과 조직의 변화 등을 조사하였으며, 이들 암석에 대해 동결융해시험을 이용하여 인공풍화를 유발시켜 공극률, 흡수율 등의 변화를 정량적으로 고찰하였다. 또한 박스프랙탈차원($D_B$)을 통해 인공풍화에 따른 미세균열의 변화를 평가하였다. 광물학적분석을 통해 풍화에 기인한 구성광물의 변화상과 2차광물의 생성, 미세균열의 발달을 관찰하였다. 실험결과를 통하여 풍화도에 대한 광물학적, 화학적, 공학적 평가는 암종에 따른 풍화특성과 원인을 분석하고 물성의 저하를 비교적 정량적으로 평가할 수 있는 방법론을 제시하고 규명하는데 활용할 수 있을 것으로 기대된다.

심한 차별풍화의 사면 보강 시공 사례 (A Case Study on the Slope Reinforcement Methods of Differential Weathering)

  • 정진교;김문규;오명주;오명수;안지은;구준기;배승현
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
    • /
    • pp.1344-1350
    • /
    • 2008
  • The slope surface at a linking road construction from a geological stratum situation and a spot investigation weathering about the base rock. We became formation the slope to very disadvantageous base rock. A stability review result confirmed report of the slope were difficult and presented the stability countermeasure. We executed the slope to the purpose to augment safely.

  • PDF