• 한국산업융합학회 논문집
• /
• 제24권6_2호
• /
• pp.883-890
• /
• 2021

In this study, joint analysis was conducted on the rock slope by aerial surveying using UAV. Aerial photos were taken using UAV to measure the directionality of the rock slope exposed to the site, and the directionality of the joint was analyzed using the photographed photos. UAV photography was taken under conditions of 90% overlap and an altitude of 50m. The photographing path was measured in the horizontal, vertical, and oblique directions based on the slope, and the joint characteristics were analyzed. Aerial surveying research on the joint directionality analysis of rock slopes is still incomplete, and the method for accurate joint directionality analysis is not presented strategically, so it is difficult to apply it in design. Through the results of this study, we would like to propose an flight photographing technique for the investigation of rock joints. As a result of the study, in the case of the joint investigation of the rock slope using UAV, it was necessary to change conditions such as altitude, aerial photography route, and overlap according to the size of the joint according to the site conditions.

• Geomechanics and Engineering
• /
• 제11권4호
• /
• pp.457-469
• /
• 2016

Steep rock slope with water-filled tension crack will happen to overturn around the toe of the slope under seismic loading. This failure type is completely different from the common toppling failure occurring in anti-dipping layered rock mass slopes with steeply dipping discontinuities. This paper presents an analytical approach to determine the seismic factor of safety against overturning for an intact rock mass slope with water-filled tension crack considering horizontal and vertical seismic coefficients. This solution is a generalized explicit expression and is derived using the moment equilibrium approach. A numerical program based on discontinuous deformation analysis (DDA) is adopted to validate the analytical results. The parametric study is carried out to adequately investigate the effect of horizontal and vertical seismic coefficients on the overall stability against overturning for a saturated rock slope under two water pressure modes. The analytical results show that vertically upward seismic inertia force or/and second water pressure distribution mode will remarkably decrease the slope stability against overturning. Finally, several representative design charts of slopes also are presented for the practical application.

• 터널과지하공간
• /
• 제22권6호
• /
• pp.393-402
• /
• 2012

정상부가 개착된 암반사면에 지중경사계를 설치하여 개착사면의 내부 거동을 계측하였으며, 국지적으로 배후면 방향으로의 거동이 관찰되었다. 사면 거동, 특히 배후면 방향으로의 거동을 유발시키는 원인을 분석하기 위하여 시추작업을 수행하였다. 추출된 시추코어를 관찰하여 사면 암반의 암석학적 취약성을 조사하였으며, 공내 BIPS 영상을 취득하여 암반의 구조적 특성을 분석하였다. 코어 절리 시료를 이용하여 불연속면의 역학적 특성을 측정하였으며, 탄질물이 협재된 절리 시료에 대한 직접전단시험을 수행하여 전단강도를 측정하였다. 사면 거동에 대한 계측결과를 사면 암반과 탄질물이 협재된 절리들의 구조적 및 역학적 특성을 종합적으로 고려하여 해석하였으며, 절리에 협재된 탄질물 및 팽윤성 점토광물의 존재에 의해 국지적인 사면거동이 지배될 수 있는 잠재성을 확인하였다.

• 한국지반공학회지:지반
• /
• 제12권6호
• /
• pp.37-50
• /
• 1996

본 연구는 국내 고속도로의 암반사면의 현장조사를 실시하여 암반사면의 붕괴형상 및 특징을 암종 및 지질구조에 따라 분류하였으며 사면의 암종에 따른 붕괴규모, 붕괴시기 등을 분류하고 불안정한 사면에 영향을 주는 주요 지질구조에 대해 분석하였다. 연구결과, 붕괴 빈도가 높은 사면은 한반도의 남동측에 나타나는 중생대 백악기 퇴적암층과 경기일원 및 강원도 일원의 비교적 넓게 분포하고 있는 선캠브리아기의 편마암, 편암지대에 분포하는 것으로 나타났다. 암종에 따른 붕괴유형은 화성암이 낙석, 평면파괴, 토층유실, 원호파괴의 붕괴유형을 보이나 붕괴빈도가 비교적 낮고 퇴적암에서는 평면파괴가 우세하게 나타났으며 계일층의 차별적인 풍화에 의해 붕락형의 붕괴유형을 보이기도 하였다. 그리고 변성암에서는 암질불량으로 인한 원형파괴, 단층구조 및 엽리 등으로 인한 쐐기파괴, 평면파괴양상을 보였다. 지질구조에 따른 붕괴는 퇴적암에서는 주로 층리에 의해서는 붕괴가 발생되었으며 화성암에서는 절리, 그리고 변성암에서는 단층과 암질불량에 의한 붕괴가 우세한 것으로 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.614-621
• /
• 2004

Blasting is a technique for rock excavation: For instance, a rock cutting in a mountain side to prepare a base for a road. The blasting damage affect the rock slope stability. Therefore control blasting must be used. In this study, cutting cases of Sixty-nine rock blasts were investigated. Blasting damage patterns in rock slope and reinforcement methods are studied.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.526-528
• /
• 2003

There are some reports which are about measuring the discontinuity from 3D model of rock surface. To generate 3D model is mainly based on remote sensing technique like laser scanning and digital stereo photogrammetry. It is obtained the DEM of the rock slope using above techniques in this study, and examined a suitability and improvement of the photogrammetry for the rock slope by overlap the DEM. It seems that accuracy of DEM generated by photogrammetry technique is influenced by the geometry of rock and type of joint.

• Structural Engineering and Mechanics
• /
• 제84권5호
• /
• pp.591-604
• /
• 2022

A gravity wall combined with an anchoring lattice frame (a combined retaining structure) is adopted at a typical engineering site at Dali-Ruili Railway Line China. Where, the combined retaining structure supports a soil deposit covering on different inclined rock slopes. With an aim to investigate and compare the effects of inclined rock slopes on the response of combined retaining structure under seismic excitation, three groups of shaking table tests are conducted. The rock slopes are shaped as planar surfaces inclined at angles of 20°, 30°, and 40° with the horizontal, respectively. The shaking table tests are supplemented by dynamic numerical simulations. The results regarding the horizontal acceleration response, vertical acceleration response, permanent displacement mode, and axial anchor force are comparatively examined. The acceleration response is more susceptible to outer structural profile of combined retaining structure than to inclined angle of rock slope. The permanent displacement decreases when the inclined angle of the rock slope increases within a range of 20°-40°. A critical inclined angle of rock slope exists within a range of 20°-40°, and induces the largest axial anchor force in the combined retaining structure.

• 한국지반환경공학회 논문집
• /
• 제9권5호
• /
• pp.61-69
• /
• 2008

일반적으로 암반사면의 안정성을 평가하는 방법으로는 평사투영해석, 한계평형해석, 수치해석, 안정성 평가표에 의한 방법 등 여러 가지 방법이 이용되고 있다. 이 중 안정성 평가표에 의한 방법은 평가법의 제안기관이나 자국의 특성에 따라 그 평가항목이 상이하며, 또한 안정성 평가표상의 개개의 평가항목에 대한 연구는 미흡한 실정이다. 본 연구에서는 315개소의 고속도로 암반사면 분석자료를 이용하여 일반적으로 사용되고 있는 암반사면의 안정성 평가항목중 기하학적 형상(사면높이, 사면경사 및 경사방향, 주불연속면의 경사 및 경사방향, 사면과 주불연속면의 방향차이) 및 지형학적 특성(지형의 집수가능성, 상부자연사면 경사, 사면형상)에 대한 이상치(abnormal value) 분석을 통하여 암반사면 안정성 평가항목의 유효성을 평가하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.669-680
• /
• 2005

It is very difficult to determine the failure block scale in great rock slopes. Especially, postulating entire slope domain as a failure block without attention to discontinuity trace lenth makes very confuse and difficult to design rock slopes. In this paper, we estimate realistic failure block scale using joint system simulation method and introduce the application procedures on rock slope analysis. Besides, presenting how joint characteristics measurement and statistical analysis results are applicated to slope stability analysis design flow.

• 한국환경복원기술학회지
• /
• 제5권5호
• /
• pp.22-29
• /
• 2002

This study was conducted to suggest develop revegetation methods and to classification of cutting-rock slopes revegetation type. The data was collected from pre-experienced data, reports and journal. Also research result was reflected from field research for the conditions of construction, vegetation types and field conditions. As the result of analyze, the factors affecting the plant coverage rates of cutting-rock slopes were period of construction, revegetation methods, slope gradient and slope length. Classification of cutting-rock slopes revegetation type was fourth from material of revegetation measures and spray type. It is recommended to adjust the proposed factor as environment, field condition and characteristic related with revegetation measures on slopes for the presentation of revegetation standard.