• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.04a
• /
• pp.105-108
• /
• 2007

Construction Automation must be founded on the Construction Robot Technology. And Construction Automation is definitely different from Construction Mechanization. This study includes the survey of the thoughts of domestic construction company officer about introducing Construction Robot into domestic construction industry, and the thoughts of recognition related to the Construction Automation currently international trend in construction industry.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05a
• /
• pp.167-169
• /
• 2011

Construction Automation as a way to solve the problems of lack of skilled labor by decrease in construction population productivity and quality decrease. We are on the way to develop a construction automation system adequate for domestic circumstances in Korea; it is called RCA(Robotic-crane based Construction Automation) system. Climbing hydraulic robot system is a part of RCA system and makes Construction Factory(CF) climb next floor. The controller can control movement needs to be developed for CF safety. Synchronous control the actual field was applied to the controller logic and synchronous control of the process through which the safety has been verified. The purpose of this study that control of climbing hydraulic robot system behavior on real-time, and to improve safety for overall construction automation system through synchronous motion controller.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.1258-1261
• /
• 1993

This paper presents a methodology of path planning and navigation for an autonomous mobile robot. A fast algorithm using decomposition technique, which computes the optimal paths between all pairs of nodes, is proposed for real-time calculation. The robot is controlled by fuzzy approximation reasoning. Our new methodology has been implemented on a mobile robot. The results show that the robot successfully navigates to its destination following the optimal path.

• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.3
• /
• pp.245-256
• /
• 2017

In this study, we describe a new approach to real-time implementation of working path control for the forging and casting manufacturing process by vertical type articulated robot system. The proposed control scheme is simple in structure, fast in computation, and useful for real-time control of factory automation based on robot system. Moreover, this scheme does not require any accurate parameter information, nor values of the uncertain parameters and payload variations. Reliability of the proposed controller is proved by simulation and experimental results for robot manipulator consisting of arm with six degrees of freedom under the variation of payloads and tracking trajectories in Cartesian space and joint space. The vertical type articulated robot manipulator with six axes made in SMEC Co., Ltd. has been used for real-time implementation test to illustrate the enhanced working path control performance for unmanned automation of the forging and casting manufacturing process.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.9
• /
• pp.34-42
• /
• 2010

Agricultural automation has become more and more important by environmental change. The automation demands the highest technology due to the ever changing various conditions in agriculture system. In the paper, semi-autonomous pesticide spray robot system has been developed for rose farming in the glass house. The robot is in autonomous mode during pesticide spraying process driven on pipe rail. The robot is manually driven while moving from a rail to the next rail. The drive platform and autonomous operation control system are developed based on IT fusion technology. The pesticide spray system is also developed with nozzles and booms for precision mist spray system. Experimental data of nozzle test is also included.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.6
• /
• pp.13-19
• /
• 1995

A dual purpose robot automation system is developed for both arc welding and spot welding by one robot within a cell. The need for automation of both arc welding and spot welding processes is urgent while the production volume is not so big as to accommodate separate stations for the two processes. Also, space is too narrow for separate stations to be settled down in the factory. A spot welding robot is chosen and the functions for arc welding are implemented in-house at cost of advanced functions. For the spot welding, a single pole type gun is used and the robot has to push down the plate to be wolded, which causes the robot positioning error. Therefore, position error compensation algorithm is developed. The basic functions for the arc welding processes are implemented using the digital I/O board of robot controller, PLC, and A/D conversion PCB. The weaving pattern is taught in meticulously by manual teach. A fixture unit is also developed for dual purpose. The main aspects of the system is presented in this paper especially in the design and implementation procedure. The signal diagrams and sequence logic diagrams are also included. The outcome of the dual purpose welding cell is the increased productivity and good production stability which is indispensable for production volume prediction. Also, it leads to reduction of manufacturing lead time.

• Journal of the Korean Society of Systems Engineering
• /
• v.18 no.2
• /
• pp.126-139
• /
• 2022

The need for synthetic automation is increasing in preparation for a gradual decrease in laboratory research manpower due to low birth rate and aging. In this study, the existing laboratory synthesis method is analyzed based on the systems engineering technique. Then, it led to the derivation of the system requirements for a fixed-based robot manipulator capable of recognition, decision and control. The robot is equipped with replaceable modular end-effectors and designed depending on the purpose and process of the synthesis. The robot with an end-effector was implemented as PoC(Proof-of-Concept), and the functions for pipetting automation was verified.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.412-417
• /
• 2002

In manufacturing of ships, problems to be solved are improvement of productivity and stabilization of quality due to the shortage of skilled workers. Working environment, in particular welding environment, is also to be improved. One solution among these problems is to rationalize and automate these working. This paper is focused on the welding automation technologies in shipbuilding industry. The features of shipbuilding in the aspect of automation are described, and the main welding robot systems to be developed by SRI are introduced in each working stages.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1024-1027
• /
• 2005

This paper describes the performance index of mobile robot and development of testbed which is used to evaluate the index. The developed testbed has rectangular structure similar to a living room of home. It is semi-automation testbed system for evaluation of cleaning performance index. This system is composed with scattering and cleaning equipment of test materials, equipment rifting of objects in inner space and sides itself, vision processing system. To be consistent of performance evaluation of cleaning robot, we make use of camera in this system for the sake of measurement of robot s mobility, path and suction quantity.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.692-697
• /
• 1997

This paper presents a method of grinding and polishing automation of precision die after CNC machining. The method employs a robot system equipped with a pneumatic spindle and a special abrasive film pad. The robote program is automatically generated off-line from a PC and downloaded to robot controller. Position and orientation data for the program is supplied from cutter contact (CC) data of NC machining process. This eliminates separate robot teaching process. This paper aims at practical automation of die finishing process which is very time consuming and suffering from shortage of workpeople. Time loss for changeover from one product to next is eliminated by off-line programming exploiting appropriate NC machining data. Dextrous 6-axis robot with rigid wrist and simple tooling enables the process applicable to larger, rather complex 3 dimensional free surfaces