• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.301-303
• /
• 2018

This paper describes a robot control system and control method of a human arm type redundant manipulator. The control of a redundant manipulator suffer from computational complexity and singularity problem because of numerical inverse kinematics. To deal with such problems, analytical methods for a redundant robot arm have been researched to enhance the performance of inverse kinematics. In this research, we propose a numerical control method and weighted pseudo inverse kinematics algorithm. Using this algorithm, it is possible to generate a trajectory passing through the singular points and intuitively move the elbow without regard to the end-effector pose. Performance of the proposed algorithm was verified by various simulations. It is shown that the trajectory planning and using this algorithm provides correct results near the singular points and can utilize redundancy intuitively. We proved this system's validity through field test.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.703-706
• /
• 1999

In this paper, robust vibration control of a one-link flexible robot arm based on variable structure system is discussed. We derive dynamic equations of it using a Lagragian assumed modes method based on Bernoulli-Euler beam theory. The optimal sliding surface is designed and the problem of chattering is also solved by the adoptation of a continuous control law within a small neighborhood of the switching hyperplane.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.6
• /
• pp.1075-1088
• /
• 1992

This paper presents techniques used to model a two arm experimental robot. Both arms are compliant and the robot operates in a vertical plane and is therefore influenced by gravity. The robot is being built to study different control strategies for robots containing compliant members. The system is built with extremely flexible members. This limits the required bandwidth of the control electronics, and mimics the flexible motions that are observed for stiffer faster robots. The objective of this paper is to develop a reduced order model of the robot system and to experimentally validate the model. Validation requires that the model includes gravitational effects. Therefore, an assumed modes model is developed which facilitates modeling of gravitational effects. In order to select the order and mode shapes for the model, an analytical solution is derived for a linearized continuous model. This is compared to the assumed modes model to determine the number of mode shapes needed to model the system. The final model, which includes shortening effects, correlates very well with experimental results.

• Journal of the Korean Society of Industry Convergence
• /
• v.19 no.1
• /
• pp.10-17
• /
• 2016

In general, articulated robot control technology is limited to the design of robot arm control systems considering each joint of the robot joint as a simple servomechanism. This method describes the varying dynamics of a manipulator inadequately because it neglects the motion and configuration of the whole arm mechanism. The changes of the parameters in the controlled system are significant enough to render conventional feedback control strategies ineffective. This basic control system enables a manipulator to perform simple positioning tasks such as in the pock and place operation. However, joint controllers are severely limited in precise tracking of fast trajectories and sustaining desirable dynamic performance for variations of payload and parameter uncertainties. In many servo control applications the linear control scheme proposes unsatisfactory, therefore, a need for nonlinear techniques that increasing. for Forging process automation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.12
• /
• pp.1153-1159
• /
• 2007

This paper presents the hardware implementation of nonlinear PID controllers for the ROBOKER humanoid robot arms. To design the nonlinear PID controller on an FPGA chip, nonlinear functions as well as the conventional PID control algorithm have to be implemented by the hardware description language. Therefore, nonlinear functions such as trigonometric or exponential functions are designed on an FPGA chip. Simulation studies of the position control of humanoid arms are conducted and results are compared. Superior performances by the nonlinear PID controllers are confirmed when disturbances are present. Experiments of humanoid robot arm control tasks are conducted to confirm the performance of our hardware design and the simulation results.

• The Journal of Korea Robotics Society
• /
• v.7 no.2
• /
• pp.65-75
• /
• 2012

This study deals with the design of a spring backboned soft arm, which will be employed for generation of human gesture as an effective means of Human Robot interaction. The special features of the proposed mechanism are the light weight and the flexibility of the whole mechanism by using a spring backbone. Thus, even in the case of collision with human, this device is able to absorb the impact structurally. The kinematics and the design for the soft arm are introduced. The performance of this mechanism was shown through experiment emulating several human gestures expressing human emotion and some service contents. Finally, this soft arm was implemented as the wing mechanism of a penguin robot.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.27-31
• /
• 1988

A study has been carried out on the implementation of IMCA (Linear Moving Voice Coil Actuator) to a flexible robot arm modelled as cantilever beam. Control performances are evaluated by computer simulation and theoretical analysis is validated by experiments. From this study, it is proved that the LMVCA can be applied easily to the control system and suppress vibration effectively.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.833-836
• /
• 1998

The propose of this paper is to implement the master slave control with non-actuated Master Arm scheme by using spaceball. The spaceball is a device which can receive all 6-DOF at once and was selected because it isn't dependent to robot type or it's DOF but can be used to produce information about 3D coordiante system The proposed method's main benefit is that one who has no idea about robot structure can control the manipulator with easy. The simulation is supported with 3 modes of control to accomodate unexpected situation. The proposed implementation has probed that a non-trained user can manipulate the slave with intuition without much difficults.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.9-13
• /
• 1997

This parer is a study on the inverse dynamics of a one-link flexible robot arm which is controlled by translational base motion. The system is composed of a flexible arm, a base for driving arm, a DC servomotor, and a computer. The arm base is moved so that the arm tip follows a desired function. The governing equations are based on the Bernoullie-Euler beam theory and solved by applying the Laplace transform method and then the numerical inversion method. Moter voltage is obtained by simulation for tip trajectory functions i. e. Bang-Bang, Cosine and Gauss Function. And, the tip motion is measured while simulation results are applying. Then the results are investigated to select most proper input and to compare their chateristics. Experimental results show the Cosine function is most proper with respect to low maximum voltage and steady state error.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.2
• /
• pp.200-206
• /
• 1991

In this paper, an output feedback is used to reduce the effect of the vibration in the control of a flexible one-link robot arm. A PD control method with a time varying gain is proposed to improve the performance of the system in tip deflection and settling time for the step reference input. By making the change of feedback gain smoothly, th input torque can be made smooth. When there is a payload with unknown mass, an interpolation method which uses the inrehgrated value of the transient response of the hub angle is proposed for the estimation of teh payload mass. This method can be used when the reference input is known and we can get highly accurate estimate for the unknown payload. It is also demonstrated that flexible one-link arm can be controlled prettry accurately by an output feedback in a noisy environment without knowing the mass of the payload.