• 로봇학회논문지
• /
• 제18권4호
• /
• pp.481-486
• /
• 2023

The purpose of this study is to optimize parameters of a contact model to obtain similar ground contact force of human walking. Dynamic walking simulation considering ground contact is performed to determine load specifications when developing walking assist robots. Large contact forces that are not observed in actual experimental data occur during the simulation at the initial contact (e.g., heel contact). The large contact force generates unrealistic large joint torques. A lower exoskeleton robot with no ankles is developed with the Matlab simscape and the nonlinear hyper volumetric contact model is applied. Parameters of the nonlinear hyper volumetric model were optimized using actual walking contact force data. As a result of optimization, it was possible to obtain a contact force pattern similar to actual walking by removing the large contact force generated during initial contact.

• 전기학회논문지
• /
• 제60권9호
• /
• pp.1761-1766
• /
• 2011

This paper presents obstacle avoidance of Leader-Follower formation. The follower robot maintain the formation with leader robot and avoid the detected obstacle. When obstacle is detected, follower robot avoid it considering leader robot and follower robot position and follower robot and obstacle position. In addition, follower robot avoid obstacle irrespective of obstacle size. Controller of follower robot is designed to satisfy Lyapunov stability by backstepping method. Simulation results shows that the designed controller has a stable performance.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1934-1937
• /
• 2005

This paper proposes suitable gait generation for dynamic walking of biped robot with varying load in real time. Author proposes the relationship between ZMP(Zero Moment Point) and measurement from FSR(Force Sensing Register). Simplifying this relationship, it is possible to reduce the computational time and control the biped robot in real time. If the weight of the biped robot varies in order to move some object, then joint trajectories of the the biped robot must be changed. When some object is loaded on the biped robot in it's home position, FSRs can measure the variation of weight. Evaluating the relations between varying load and stable gait of the biped robot, it can walk adaptively. This relation enables the biped robot to walk properly with varying load. The simulation is also represented in this paper which shows proposed relationships.

• 한국정밀공학회지
• /
• 제15권5호
• /
• pp.153-160
• /
• 1998

A master-slave system for tele-operation had been developed and tested for several decades. In this paper the master robot is composed of several wires and provides position information of the handle which is driven by a operator within the master robot work space. A PC is used for the command calculation for a slave robot. This paper deals with the relation between the number of strings and D.O.F of the master robot, control method of the slave robot during the operation and the monitoring method over the working area by the computer graphics simulation. The D.O.F of the master robot can be modified by adding or subtracting some strings. The controller of the slave robot uses the advanced PD control method to keep the performance against varying working load.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제10권3호
• /
• pp.210-217
• /
• 2010

This paper presents integrated path planning and collision avoidance for an omni-directional mobile robot. In this scheme, the autonomous mobile robot finds the shortest path by the descendent gradient of a navigation function to reach a goal. In doing so, the robot based on the proposed approach attempts to overcome some of the typical problems that may pose to the conventional robot navigation. In particular, this paper presents a set of analysis for an omni-directional mobile robot to avoid trapped situations for two representative scenarios: 1) Ushaped deep narrow obstacle and 2) narrow passage problem between two obstacles. The proposed navigation scheme eliminates the nonfeasible area for the two cases by the help of the descendent gradient of the navigation function and the characteristics of an omni-directional mobile robot. The simulation results show that the proposed navigation scheme can effectively construct a path-planning system in the capability of reaching a goal and avoiding obstacles despite possible trapped situations under uncertain world knowledge.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.76-76
• /
• 2000

The calibration of the robot system with a visual sensor consists of robot, hand-to-eye, and sensor calibration. This paper describe a new technique for computing 3D position and orientation of a 3D sensor system relative to the end effect of a robot manipulator in an eye-on-hand robot configuration. When the 3D coordinates of the feature points at each robot movement and the relative robot motion between two robot movements are known, a homogeneous equation of the form AX : XB is derived. To solve for X uniquely, it is necessary to make two robot arm movements and form a system of two equation of the form: A$_1$X : XB$_1$ and A$_2$X = XB$_2$. A closed-form solution to this system of equations is developed and the constraints for solution existence are described in detail. Test results through a series of simulation show that this technique is simple, efficient, and accurate fur hand/eye calibration.

• 제어로봇시스템학회논문지
• /
• 제16권3호
• /
• pp.233-238
• /
• 2010

This paper describes a multi-mobile robot system with fuzzy rule based structure in collision avoidance. Collision avoidance is an important function to perform a given task collaboratively and cooperatively in multi-mobile robot environments. So the important but challenging problem is handled in this paper. Considered obstacles for collision avoidance between multi mobile robots are static, dynamic, or both of them at the same time. Using the fuzzy rule based structure, distance and angle from a robot to obstacles are described as fuzzy linguistic values and steering angle for the robot are updated from the collision environments. As a result, the multi-mobile robot can modify a global path from a robot itself to its own target. In addition, avoiding collision with static or dynamic obstacles for the robot system can be achieved. Simulation based experimental results are given to show usefulness of this method.

• 전기학회논문지
• /
• 제63권1호
• /
• pp.92-98
• /
• 2014

This paper proposes a hermite spline based D* algorithm for effective path planning of mobile robot to improve the detecting speed. In conventional path planning research, a robot is supposed to pass through predetermined centers of grid partitions of area. However it doesn't guarantee the optimal path during its navigation. In addition, a robot is hard to avoid obstacles effectively. The proposed algorithm in this paper makes use of stochastic characteristics of nonholonomic mobile robot and estimation of shortest path to curvature movement of the robot. The performance evaluation of the improved spline D* algorithm performed through simulation shows its effectiveness. Moreover, the experiment verifies that a robot can find the shortest path by building the curve paths while it is moving on the path in spline.

• 한국정밀공학회지
• /
• 제14권1호
• /
• pp.158-167
• /
• 1997

For the use of a mobile robot in dynamic environment, a collision-avoidance algorithm with moving obsta- cle is necessary. In this paper, a collsion-avoidance algorithm of a mobile robot is presented, when a mobile robot detects the collision with moving obstacle on the navigational path. Using reported positions of moving obstacle with sensors, the mobile robot predicts the next position of moving obstacle with possibility of collision. The velocity of moving obstacle is modeled as random walk process with Gaussian distribution. The optimal collision-avoidance path in which turning motion of the mobile robot is considered is generated with relative velocity between the mobile robot and moving obstacle. For the safety of collision-avoidance path, attractive potential with the safety factor is suggested. The simulation results using this algorithm show the mobile robot avoids collision with moving obstacle in many cases.

• 로봇학회논문지
• /
• 제7권1호
• /
• pp.1-8
• /
• 2012

A humanoid robot hand with one thumb and two fingers has been developed. Each finger has the specially designed compact joints, called "MEC Joint", which convert the rotation of a motor to the swing motion of a pendulum. The robot hand with the MEC Joints is compact and relatively light but strong enough to grasp objects in the same manner as human being does in daily activities. In this paper the kinematic model and the torque characteristics of the MEC Joint are presented and compared with the results of the dynamic simulation and the dynamometer test. The dynamic behavior of the thumb and two fingers with MEC Joints are also presented by computer simulation.