• 한국정밀공학회지
• /
• 제31권9호
• /
• pp.821-829
• /
• 2014

This paper describes the development of a wireless communication controller of gripper contact signal for industrial robot. The wireless communication gripper controller is composed of a robot wireless communication controller and a gripper wireless transmitting/receiving controller. The robot wireless communication controller transmits the data of gripper sensors, and the gripper wireless communication controller receives the data. And the controller sends the data to the robot controller of industrial robot. As a result of the characteristics test of the wireless communication gripper controller, it is thought that the robot wireless communication controller A transmits and receives three gripper wireless transmitting/receiving controller A1, A2, A3 another. Thus, the developed wireless communication gripper controller can be used for transmitting/ receiving the data of gripper sensors for industrial robot.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1099-1104
• /
• 2003

In this paper, the position control of a car-like mobile robot using neural network is proposed. The positional information of the mobile robot is given by a laser range finder located remotely through wireless communication. The heading angle is measured by a gyro sensor. Considering these two sensor information as references, the robot posture by localization is corrected by a cascaded controller. In order to improve the tracking performance, a neural network with a cascaded controller is used to compensate for any uncertainty in the robot. The remotely located neural network filter modifies the reference trajectories to minimize the positional errors by wireless communication. A car-like mobile robot is built as a test-bed and experimental studies of proposed several control algorithms are performed. It turns out that the best position control can be achieved by a cascaded controller with neural network.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1506-1510
• /
• 2004

A mobile robot system is developed to inspect the condition of industrial facilities under hot environment. The mobile robot is equipped with internal and external heat insulating material, an internal cooling mechanism, two CCD cameras, wireless communication devices for both the control and image signals, and an embedded controller. The portable controller is equipped with two joysticks for both the mobile robot and the inspection CCD camera, an LCD monitor, and several buttons. The developed mobile robot travels on the internal floor in hot furnaces by operators' joystick operation, captures the images of facilities in the furnaces using a zoom CCD camera, and sends the images to the portable controller through wireless communication. The mobile robot can be operated without any problem under hot environment less than 400$^{\circ}C$ in 30 minutes. This kind of automatic inspection mobile robot can be helpful to prevent significant troubles of industrial facilities without danger of human beings under harmful environment.

• 한국지능시스템학회논문지
• /
• 제24권2호
• /
• pp.186-192
• /
• 2014

본 논문은 IMU센서를 이용하여 보드로봇을 무선으로 제어하는 연구에 관해 다룬다. 사용된 보드로봇은 일종의 탑승형 로봇으로 탑승자는 옆으로 서서 앞을 보며 제어한다. 탑승자는 제안된 무선제어기를 팔의 상박에 착용하고, 무선제어기의 각도에 따라서 방향전환을 할 수 있다. 무선제어를 위해 블루투스(Bluetooth)가 사용되며, 사용자의 행동에 따른 다섯 종류의 명령('1'우회전, '2'중립, '3'좌회전, '4'운전, '5'정지)을 IMU 센서로 측정하여 기울기에 대한 디지털 값을 보드로봇의 제어기로 전송한다. 보드로봇에서 수신된 값은 정해진 명령을 기반으로 모터를 제어한다. 결과적으로, 제안된 IMU 센서 기반의 사용자 인터페이스는 실제의 보드를 조정하듯이 보드로봇을 쉽고 편리하게 제어할 수 있다.

• 제어로봇시스템학회논문지
• /
• 제10권7호
• /
• pp.625-633
• /
• 2004

In this paper, position control of a car-like mobile robot using a neural network is presented. positional information of the mobile robot is given by a laser range finder located remotely through wireless communication. The heading angle is measured by a gyro sensor. Considering these two sensor information as a reference, the robot posture is corrected by a cascaded controller. To improve the tracking performance, a neural network with a cascaded controller is used to compensate for any uncertainty in the robot. The neural network functions as a compensator to minimize the positional errors in on-line fashion. A car-like mobile robot is built as a test-bed and experimental studies of several controllers are conducted and compared. Experimental results show that the best position control performance can be achieved by a cascaded controller with a neural network.

• 제어로봇시스템학회논문지
• /
• 제13권2호
• /
• pp.101-107
• /
• 2007

A coaxial rotor flying robot is developed for surveying and reconnoitering various circumstances under calamity environment. The robot has two contrarotating rotors on a common axis, an embedded microcontroller, an IMU(Inertial Measurement Unit), an IR sensor for height control, a micro camera for surveillance, ultrasonic position sensors and wireless communication devices. A bell-bar mounted on the top of the upper rotor hub increases stability and improves flight performance. In this paper, we present a dynamic model of a coaxial rotor flying robot and design an embedded controller far the robot, and implement them to control the developed flying robot. Experimental results show that the proposed controller is valid for autonomous hovering and position control.

• 로봇학회논문지
• /
• 제6권1호
• /
• pp.1-9
• /
• 2011

An increasing number of researches and developments for personal or professional service robots are attracting a lot of attention and interest industrially and academically during the past decade. Furthermore, the development of intelligent robots is intensively fostered as strategic industry. Until now, most of practical and commercial service robots are worked by remotely operated controller. The most important technical issue of remote control is a wireless communication, especially in the indoor and unstructured environments where communication infrastructures might be destroyed by various disasters. Therefore we propose a multi-robot following navigation method for securing the valid communication distance extension of the remote control based on WPAN(Wireless Personal Area Networks). The concept and implementation of following navigation are introduced and the performance verification is performed through real navigation experiments in real or test-bed environments.

• 한국지능시스템학회논문지
• /
• 제23권4호
• /
• pp.341-347
• /
• 2013

본 논문은 장갑 센서를 이용한 보드로봇의 무선제어 연구에 관해 다룬다. 사용된 보드로봇은 일종의 탑승형 로봇으로 탑승자는 옆으로 서서 앞을 보며 제어한다. 탑승자는 제안된 무선제어기 장갑을 한 손에 끼고, 손가락 동작에 의해 방향전환을 할 수 있다. 보드로봇과 사용자와의 무선제어를 위하여 블루투스(Bluetooth)가 사용되며, 장갑 제어기에는 광센서(CdS cell Sensor)와 LED(Light Emitted Diode)를 사용하여 손가락 동작에 의해 보드로봇을 조종한다. 사용자의 손동작에 따른 다섯 종류의 명령('1'우회전 '2'중립 '3'좌회전 '4'운전 '5'정지)을 CdS 센서로 측정된 아날로그 값을 기반으로 손가락 접촉유무를 확인한 후, 접촉유무에 대한 디지털 값을 전송한다. 보드로봇에 장착된 블루투스 송신기는 이 값을 수신한 후 수신된 명령을 기반으로 보드로봇은 주행된다. 실험의 결과로 제안된 장갑센서 인터페이스가 보드로봇 제어를 위해 효과적으로 사용될 수 있음을 보여준다.

• 제어로봇시스템학회논문지
• /
• 제12권7호
• /
• pp.679-685
• /
• 2006

In this paper, development of an omni-directional mobile robot with rocker-bogie link structure is addressed. The overall mobile robot system consists of the robot mechanism with embedded control architecture, wireless communication with host graphic monitoring system, and the joy stick tole-controller. In the cluttered environment with various sizes of obstacles, the omni-directionality and the traversality are required for a mobile robot, so that the robot call go around or climb over the obstacles according to the size. The mobile robot mechanism developed in this paper has both of the omni-directionality and the traversality by 4 steerable driving wheels and the 2 additional passive omni-directional wheels linked with the rocker-bogie structure. The kinematic modeling for the mobile robot is described based on the well-known Sheth-Uicker convention and the instantaneous coordinate system.

• 제어로봇시스템학회논문지
• /
• 제10권8호
• /
• pp.689-695
• /
• 2004

This paper presents a robot system that combines computer network and an autonomous mobile robot where RTOS is installed. We propose a wireless communication protocol, and also implement it on the RTOS of the robot system. Main controller of the robot processes the control program as a task type in the real-time operating system. Peripheral devices are driven by the device driver functions with the dependency of the hardware. Because the client and server program was implemented to support the multi-platforms by Java SDK and Java JMF, it is easy to analyze programs, maintain system, and correct the errors in the system. End-user can control a robot with a vision showing remote sight over the Internet in real time, and the robot is moved keeping away from the obstacles by itself and command of the server received from end-user at the local client.