• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.833-836
• /
• 1998

The propose of this paper is to implement the master slave control with non-actuated Master Arm scheme by using spaceball. The spaceball is a device which can receive all 6-DOF at once and was selected because it isn't dependent to robot type or it's DOF but can be used to produce information about 3D coordiante system The proposed method's main benefit is that one who has no idea about robot structure can control the manipulator with easy. The simulation is supported with 3 modes of control to accomodate unexpected situation. The proposed implementation has probed that a non-trained user can manipulate the slave with intuition without much difficults.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.8
• /
• pp.156-164
• /
• 1998

IMS is a more advanced manufacturing system than FMS. However, IMS do not have sufficient performance for the work in the various and uncertain environment, because of the difficulty of the work and occurrence of the unexpected condition. If IMS is hard to work properly, teleoperation system can support it by using the human's consideration and judgment. The master mechanism is a basic component of the teleoperation system and the development of the useful one is important for efficiency of the work. A master mechanism of exoskeleton type can increase the work efficiency, mobility and harmony between a working robot and an operator. This paper describes an arm-harness of exoskeleton type, which is able to drive a robot according to judgment. This device is applied to a robot system for evaluating the system performance through the experiment.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.343-347
• /
• 1992

In this paper, an unilateral teleoperation system using an universal master arm is developed. This system is composed of an universal master arm, a slave arm and a telerobot controller. The universal master arm has a vertically articulated type link structure, while an industrial robot is used as a slave arm. As the shapes of master arm and slave arm are different, the workspace mapping is needed, which maps the workspace of master arm to that of slave arm. Experimental results show that the slave arm of the developed system effectively follows the operator's motion.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.815-820
• /
• 1993

Robotic technology has been grown up conspicuously by its versatility. KAERI has been involved in one of facets of robot industry to keep abreast of rapid evolving technologies In robotic field and has launched long-term R&D plan to assure the stable nuclear energy. In this paper, the latest development status of teleoperated robot system has been presented with emphasis the configuration of overall control system with 3 dimensional graphic system that provides operators with tele-presence situation. This robot system under development, composed of master-slave arm with controller and graphic simulator, is operated by a master manipulator to enable an installation and removal operation of nozzle dam system for steam generator. Evaluation and analysis has been carried out to get optimal parameters of robot system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.8
• /
• pp.603-609
• /
• 2016

This paper presents an optimally designed master device mechanism for teleoperated interventional robotic system. The interventional procedures using the teleoperated robotic system and the physicians' requirements are summarized. The master device should implement 5-DOF motion including 2-DOF translational motion for the entry position control, 2-DOF rotational motion for the orientation control, and 1- DOF translational motion for needle insertion. The handle assembly includes a 1-DOF translational mechanism for needle insertion and buttons for operation mode selection. The mechanisms for the 2-DOF translational motion and the 2-DOF rotational motion are designed using motors and brakes based on the various mechanisms to satisfy all the above requirements, respectively. Absolute position sensors are adopted to implement automatic initial positioning and orientation matching at the first step of needle insertion.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1293-1296
• /
• 1997

We investigate a design methodology for master arm which is employed in remote-site control. Though counter-balancing has been employed for the purpose of lessening the actuator loads, it results in the increase of dynamic load at the task position. Therefore, there exist a trade-off between counter-balacing and dynamic performance. The concept of a composite index is introduced to simulataneously consider those two effects in the design of master arms. Several alternative designs of master arms are suggested.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.5
• /
• pp.393-400
• /
• 2002

Teleoperation enables an operator to manipulate remote objects. One of the main goals in teleoperation researches is to provide the operator with the fueling of the telepresence, being present at the remote site. For these purposes, a master robot must be designed as a bilateral control system that can transmit position/force information to a slave robot and feedback the interaction force. A newly proposed impedance algorithm is applied for the control of a haptic interface that was developed as a master robot. With the movements of the haptic interface for position/force commands, impedance parameters are always varying. When the impedance parameters between an operator and the haptic interface and the dynamic model are known precisely, many model based control theories and methods can be used to control the device accurately. However, due to the parameters'variations and the uncertainty of the dynamic model, it is difficult to control haptic interfaces precisely. This paper presents a robust adaptive impedance control algorithm for haptic interfaces.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.300-305
• /
• 2007

This study developed a human robot master arm, which has a structure similar to the human arm, with the object of taking over human works. The robot arm was structured to reproduce human actions using three axes on each of the shoulder and the wrist based on mechanics, and the actuator of each axis adopted an ordinary DC motor. The servo system of the actuator is a one body type employing an amp for electric power, and it was designed to be small and lightweight for easy installation. We examined the posture control characteristics of the developed robot master arm in order to test its interlocking, continuous notions and reliability.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.243-245
• /
• 2007

This paper presents the implementation of teleoperation control of an omni-direction mobile robot. The master joystick robot has two degrees of freedom to control the movement of the slave mobile robot in the Cartesian space. In addition, the whole teleoperated control system is closed by the force feedback. The operator can feel the contact force as the slave robot makes contact with the environment. Experimental results show that the teleooerated control with force feedback has been successfully implemented.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.9
• /
• pp.7-13
• /
• 2009