• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.5
• /
• pp.464-474
• /
• 2004

This paper proposes a middleware structure for the module-based personal robot, which can run on heterogeneous network interfaces and provides users easy interface-method regardless of underlying heterogeneous interfaces and convenient exchange of modules. The proposed middleware is divided into three layers of a streaming layer (SL), a network adaptation layer (NAL) and a network interface layer (NIL). The streaming layer manages application transactions using middleware services and provides user a uniform interfaces to the proposed middleware. The network adaptation layer manages a message-routing and provides naming service and it is a core of the proposed middleware. And the network interfaces layer manages dependent parts of heterogeneous network interfaces such as IEEE1394, USB, Ethernet, and CAN (Control Area Network). This paper implements the proposed middleware structure, where 3 types of interfaces of IEEE 1394, USB and Ethernet are used, and measures response times among those interfaces.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.4
• /
• pp.399-405
• /
• 2008

Recently, robot technology is actively going on progress to the field of various services such as home care, medical care, entertainment, and etc. Because these service robots are in use nearby person, they need to be operated safely even though hardware and software faults occur. This paper proposes a Fault-Tolerant middleware for a robot system, which has following two characteristics: supporting of heterogeneous network interface and processing of software components and network faults. The Fault-Tolerant middleware consists of a Service Layer(SL), a Network Adaptation Layer(NAL), a Network Interface Layer(NIL), a Operating System ion Layer(OSAL), and a Fault-Tolerant Manager(FTM). Especially, the Fault-Tolerant Manager consists of 4 components: Monitor, Fault Detector, Fault Notifier, and Fault Recover to detect and recover the faults effectively. This paper implements and tests the proposed middleware. Some experiment results show that the proposed Fault-Tolerant middleware is working well.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.8
• /
• pp.156-164
• /
• 1998

IMS is a more advanced manufacturing system than FMS. However, IMS do not have sufficient performance for the work in the various and uncertain environment, because of the difficulty of the work and occurrence of the unexpected condition. If IMS is hard to work properly, teleoperation system can support it by using the human's consideration and judgment. The master mechanism is a basic component of the teleoperation system and the development of the useful one is important for efficiency of the work. A master mechanism of exoskeleton type can increase the work efficiency, mobility and harmony between a working robot and an operator. This paper describes an arm-harness of exoskeleton type, which is able to drive a robot according to judgment. This device is applied to a robot system for evaluating the system performance through the experiment.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2433-2435
• /
• 2002

The purpose of this paper is to introduce a case study of developing a miniature biped robot. The biped robot has a total of twenty-one degrees of freedom(DOF) ; There are two legs which have six DOF each, two arms which have three DOF each and a waist which has three DOF. RC servo-motors were used as actuators. We have developed motor controller, sensor controller and ISA-interface card. Motor controller, PWM generator, can control eight motors Sensor controller is connected to eight FSR(Force Sensing Resistors). For high level controller communicate with low level controller, ISA-interface card has developed. For the stable walking, CMAC(Cerebellar Model Articulation Controller) neural network algorithm is applied to our system CMAC is robust at noise.

• 전기의세계
• /
• v.39 no.6
• /
• pp.14-19
• /
• 1990

1. CAD system과 PROPS를 접속하여 CADsystem에서 Design된 surface를 사용할 수 있으며 Robot Kinematics를 graphic library화하여 surface배치 수상 및 path generation 및 animation을 통하여 가공작업을 위한 로보트 운동을 simulation할 수 있게 되었다. 2. Denavit-hartenberg transformation form에 의해 여러 Robot Kinematic을 일반적인 형식으로 library화 하였다. 3. 금형 가공의 공정들을 Menu로 만들어서 Expert system을 도입, 손쉽게 Interactive한 작업을 할 수 있게 하였다. 4. 차후의 연구 목표는 로보트 Calibration S/W의 개발 및 실현 그리고 Expert System을 이용한 Robot Program Generator의 완성을 통한 전체 Off-line programming System을 정립하는데 있다. 이를 위해서 더 실제적인 Tool Path Generation과 Expert System을 이용한 가공 조건의 결정 및 User Interface를 위한 Window가 개발되어야 한다. 5. 1차년도에 개발된 Robotonomic Tool System의 유연성을 확장시킨다. 실험결과를 바탕으로 공정 자동화 시스템을 확장시킨다. 6. 연마공정자동화에 필수적인 공구 및 공구 Tip의 표준화 및 자동교환장치를 개발한다. 7. 금형연마 Cell의 구성요소들간의 Interface 및 System Controller에서의 집적화를 시킨다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1430-1434
• /
• 2004

Recently, Virtual reality parts is applied in various fields of industry. In this paper we developed basic components for virtual robot control system interfaced with real environment. For this, a real robot with virtual interface module is developed and virtual robot of similar image with real robot is created by putting on 3D graphic texture to the real robot. To build an unknown environment to be linked with virtual environment, we proposed a hough transformation based algorithm. Our proposed algorithm consists of navigation module by using fuzzy engine and map building module. Experiments using a developed robot illustrate the method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.614-617
• /
• 2004

The construction industry is typical of the ' job of 3D ', the automated construction equipments are getting used in the domestic construction sites and the construction robots began to be sold in the abroad. The research developed the small sized robot which could be used at the apartments and the office buildings with the small floors. But the past finishing robot could not be operated easily, it had expensive controller which could not increase the production of robot. In this paper, user interface is made to operate easily the small concrete floor finishing robot with two trowel which has low cost controller, motion algorithm including modeling and mechanism about the concrete finishing robot is developed to control moving. Simulation and experiment figure out how the finishing robot moves and will contribute to realizing it.lizing it.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.45-45
• /
• 2000

This paper proposes a remote control system that combines computer network and an autonomous mobile robot. We control remotely an autonomous mobile robot with vision via the internet to guide it under unknown environments in the real time. The main feature of this system is that local operators need a World Wide Web browser and a computer connected to the internet communication network and so they can command the robot in a remote location through our Home Page. The hardware architecture of this system consists of an autonomous mobile robot, workstation, and local computers. The software architecture of this system includes the server part for communication between user and robot and the client part for the user interface and a robot control system. The server and client parts are developed using Java language which is suitable to internet application and supports multi-platform. Furthermore, this system offers an image compression method using motion JPEG concept which reduces large time delay that occurs in network during image transmission.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.475-475
• /
• 2000

This paper describes the construction of an autonomous mobile robot with functions of collision avoidance and speech recognition that is used for teaching path of the robot. The human voice as a teaching method provides more convenient user-interface to mobile robot. For safe navigation, the autonomous mobile robot needs abilities to recognize surrounding environment and avoid collision. We use u1trasonic sensors to obtain the distance from the mobile robot to the various obstacles. By navigation algorithm, the robot forecasts the possibility of collision with obstacles and modifies a path if it detects dangerous obstacles. For these functions, the robot system is composed of four separated control modules, which are a speech recognition module, a servo motor control module, an ultrasonic sensor module, and a main control module. These modules are integrated by CAN(controller area network) in order to provide real-time communication.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2051-2056
• /
• 2003

In this paper, a tele-manipulation in explosive ordnance disposal(EOD) applications is discussed. The ROBHAZ-DT2 is developed as a teleoperated mobile manipulator for EOD. In general, it has been thought that the robot must have appropriate functions and accuracy enough to handle the complicated and dangerous mission. However, the research on the ROBHAZ-DT2 revealed that the teleoperation causes more restrictions and difficulties in EOD mission. Thus to solve the problem, a novel user interface for the ROBHAZ-DT2 is developed, in which the operator can interact with various human senses (i.e. visual, auditory and haptic sense). It enables an operator to control the ROBHAZ-DT2 simply and intuitively. A tele-manipulation control scheme for the ROBHAZ-DT2 is also proposed including compliance control via force feedback. It makes the robot adapt itself to circumstances, while the robot faithfully follows a command of the operator. This paper deals with a detailed description on the user interface and the tele-manipulation control for the ROBHAZ-DT2. An EOD demonstration is conducted to verify the validity of the proposed interface and the control scheme.