• Journal of Electrical Engineering and Technology
• /
• 제2권2호
• /
• pp.280-285
• /
• 2007

This paper presents a robustly adaptive flux observer for speed-sensorless induction motor control. The proposed approach employs additional robustifying signals to cope with the parametric uncertainties instead of designing an estimator, which has been normally used in power electronic drives. For that, the sliding-mode like adaptive controls are designed and their gain parameters are determined so that the observer dynamics are stable in the sense of Lyapunov, and furthermore they can guarantee the robustness against parametric uncertainties in induction motor systems. Estimated rotor speed is to be used to generate feedback control signal for the speed sensorless vector control system. To show the validity and efficiency of the proposed system, simulation results are presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1387-1391
• /
• 2003

The fundamental aim of this paper is to present a solution algorithm to achieve cooperative contour controlling, under joint acceleration constraint with maximum cooperative speed. Usually, the specifications like maximum velocity of cooperative trajectory are determined by the application itself. In resolving the cooperative trajectory into two complementary trajectories, an optimum task resolving strategy is employed so that the task assignment for each robot is fair under the joint acceleration constraint. The proposed algorithm of being an off-line technique, this could be effectively and conveniently extended to the existing servo control systems irrespective of the computational power of the controller implemented. Further, neither a change in hardware setup nor considerable reconfiguration of the existing system is required in adopting this technique. A simulation study has been carried out to verify that the proposed method can be realized in the generation of complementary trajectories so that they could meet the stipulated constraints in simultaneous maneuvering.

• Journal of the Korean Society for Precision Engineering
• /
• 제13권10호
• /
• pp.94-104
• /
• 1996

This paper presents a new approach to the design of adaptive control system using DSPs(TMS320C31) for robotic manpulators to achieve accurate trajectory tracking by the joint angles Digital signal processors are used in implementing real time adaptive control algorithms to provide an enhanced motion control for robotic manipulators. In the proposed contorl scheme, adaptation laws are derived from the improved Lyapunov second stability analysis method based on the adaptive model reference control theory. The adaptive controller consists of an adaptive feedforward controller, feedback controller, and PID type time varying auxillary control elements. The proposed adaptive control scheme is simple in structure, fast in computation, and suitable for implementation of real-time control. Morever, this scheme does not require an accurate dynamic modeling nor values of manpipulator parameters and payload. Performance of the adaptive controller is illustated by simulation and experimental results for a SCARA robot.

• International Journal of Korean Welding Society
• /
• 제4권1호
• /
• pp.30-37
• /
• 2004

There have been continuous efforts on automating welding processes. This automation process could be said to fall into two categories, weld seam tracking and weld quality evaluation. Recently, the attempts to achieve these two functions simultaneously are on the increase. For the study presented in this paper, a vision sensor is made, a vision system is constructed and using this, the 3 dimensional geometry of the bead is measured on-line. For the application as in welding, which is the characteristic of nonlinear process, a fuzzy controller is designed. And with this, an adaptive control system is proposed which acquires the bead height and the coordinates of the point on the bead along the horizontal fillet joint, performs seam tracking with those data, and also at the same time, controls the bead geometry to a uniform shape. A communication system, which enables the communication with the industrial robot, is designed to control the bead geometry and to track the weld seam. Experiments are made with varied offset angles from the pre-taught weld path, and they showed the adaptive system works favorable results.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권3호
• /
• pp.623-630
• /
• 2001

The conventional control techniques based a mathematical model are not well suited for dealing with ill-defined and uncertain system like a linear quadratic control. Recently, fuzzy control has been successfully applied to a wide variety of practical problems such as robot, water purification, automatic train operation system etc. In this paper, a design technique of robust Fuzzy-LQ controller for each subsystem is designed. Secondly , all the subsystem controllers are combined by fuzzy weighted averaging method. Finally the effectiveness of the proposed controller is verified through a series of computer simulations for an inverted pole system.

• Transactions of the Korean Society of Mechanical Engineers
• /
• 제18권8호
• /
• pp.2088-2100
• /
• 1994

Considerable attention has been given to controller designs that utilize the variable structure system theory in order to achieve robust tracking performance of robotic manipulators subjected to parameter variations and extraneous disturbances. However, the theory has not had wide spread acceptance in practical control engineering community due mainly to the worry of chattering which is inherently ever-existing in the variable structure system. This paper presents a novel type of fuzzy-sliding mode controller to alleviate the chattering problem. A sliding mode controller for robust robot control is firstly synthesized with an assumption that the imposed system uncertainties satisfy matching conditions so that certain deterministic performances can parameters and control rules are obtained from a relation between predetermined sliding surfaces and representative points in the error state space. A two degree-of-freedom robotic manipulator subjected to a variable payload and a torque disturbance is considered in order to demonstrate superior tracking performance accrued from the proposed methodology.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• 제48권4호
• /
• pp.452-460
• /
• 1999

Sawing experiments using a two-arm system have been performed in this work. The two-arm system under consideration of two kinematically-nonidentical arms. A passive joint is inserted at the end-point of one robot in order to increase the mobility up to the motion degree required for sawing tasks. A hybrid control algorithm for control of the two-arm system is designed. We experimentally show that the performance of the velocity and force response are satisfactory, and that one additional passive joint not only prevents the system from unwanted yaw motion in the sawing task, but also allows an unwanted pitch motion to be notably reduced by an internal load control. To show the general applicability of the proposed algorithms, we perform experimentation under several different conditions for saw, such as three saw blades, two sawing speeds, and two vertical forces.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제38권2호
• /
• pp.129-136
• /
• 2014

Target-tracking systems are important for carrying out effective surveillance missions using mobile surveillance robots. In this paper, we propose a target-tracking algorithm using camera image data for a three-axis mobile surveillance robot and carry out an actual hardware test for verifying the proposed algorithm. The heading direction vector of a camera system is deduced from the position error between the viewfinder center and the object center in a camera image. The position error is obtained using the CAMShift(Continuously Adaptive Mean Shift) algorithm, an image processing technique. The performance test of an actual three-axis mobile surveillance robot was carried out for verifying the proposed target-tracking algorithm in a real environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제17권9호
• /
• pp.1040-1049
• /
• 1992

When the model of control object is not described correctly, ambiguity is often expressed by unknown parameter, In a case that this ambiguity satisfies a certain condition of limit, if robust control method is used, even if model is not correctly discribed, control system can be composed. The characteristic of control based on the variable structure theory is that the influence by ambiguity of system eradicates high-gain feedback. Therefore in this paper, VSS indentifier is proposed. Transformation of control input producing control system in sliding mode actually reflects influence of ambiguity unknown parameter of control object. If useful information is out from transformation input by a few times of operation, proper identify mechanism is selected and this information is used, to decide the unknown parameter is possible. So more effective controller was composed by addition of the proposed identifier to the unknown parameter identifier of robot manipulator.

• Journal of the Korean Society for Precision Engineering
• /
• 제30권4호
• /
• pp.368-374
• /
• 2013

Maintenance works for current high-rise buildings significantly depend on human labor, unlike other construction processes that are gradually being automated. Herein, this paper proposes robotic building maintenance system using motion control, in specific, reducing a system jerk which is directly subjected to improve the process performance and economic feasibility. The sensor for detecting straight and curvature section of the building facade, moreover rail-joint segment can be detected and be utilized for reducing jerk of the system. Analysis of the proposed system error caused by excessive vibration, e.g. jerk motion is introduced. To enhance the stability and safety of the system, herein, the strategy is proposed for enhancing the performance of the system based on anti-jerk motion control algorithm which comes out increasing the stability and sustainability of the integrated system, as well.