• 한국컴퓨터그래픽스학회논문지
• /
• 제3권1호
• /
• pp.17-22
• /
• 1997

본 논문에서는 도로 환경을 재구성하기 위한 새로운 모델링 기법을 제시한다. 도로 환경 재구성을 위한 모델링 알고리즘은 도로 주변 건물들의 3차원 모델을 재구성하는 부분, 도로 모델을 편집 생성하는 부분, 그리고 기타 부가적인 객체들을 모델링하는 부분으로 나누어지는데, 각 부분은 모델링하는 대상의 특성에 따라 각기 다른 모델링 기법을 적용한다. 특히 도로 주변 건물의 3차원 모델을 재구성하기 위한 모델링 기법으로 여러 장의 사진으로부터 모델의 3차원 구조를 다면체 단위로 추출해내는 Photogrammetric Modeling 기법[1, 2]을 사용하였는데, 본 논문에서 제시하는 모델링 기법은 사용자 인터페이스를 개선하고 도로 환경이 지니는 제약조건들을 추가함으로써 도로라는 특수한 환경을 재구성하는데 있어 Photogrammetric Modeling기법에 비해 단순하고 용이한 시스템을 제공한다.

• 한국자동차공학회논문집
• /
• 제18권4호
• /
• pp.92-98
• /
• 2010

Virtual ground modeling is one of key topic for real-time vehicle dynamic simulation. This paper discusses about the virtual 3D road modeling process using parametric surface concept. General road data is a type of lumped position vector so interpolation process is required to compute contact of internal surface. The parametric surface has continuity and linearity within boundaries and functions are very simple to find out contact point. In this paper, the parametric surface formula is adopted to road modeling to calculate road hight. Position indexing method is proposed to reduce memory size and resource possession, and a simple mathematical method for contact patch searching is also proposed. The developed road process program is tested in dynamic driving simulation on off-road. Conclusively, the new virtual road program shows high performance of road hight computation in vast field of off-road simulation.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.1130-1137
• /
• 2022

The Industry Foundation Classes (IFC) provides standardized product models for the building construction domain. However, the current IFC schema has limited representation for infrastructure. Several studies have examined the data schema for road and highway modeling, but not in a sufficiently comprehensive and robust manner to facilitate the overall integrated project delivery of road projects. Several discussions have focused on slope engineering for road projects, but no solution has been provided regarding the formalized parametric modeling up to now. Iterative design, analysis, and modification are observed during the process of slope design for road projects. The practitioners need to carry out the stability analysis to consider different road design alternatives, including horizontal, vertical, and cross-section designs. The procedure is neither formalized nor automated. Thus, there is a need to develop the formal representation of the product and process of slope analysis for road design. The objective of this research is to develop a formal representation (i.e., an IFC extension data schema) for slope analysis. It consists of comprehensive information required for slope analysis in a structured manner. The deliverable of this study contributes to both the formal representation of infrastructure development and, further, the automated process of slope design for road projects.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.204-208
• /
• 2006

This study is to develop a distributed urban flood runoff model that simulates the road runoff and to test the applicability of the model by applying to Pyeongtaek city of $12.2km^2$. To generate the runoff along the runoff, agree burned DEM (Digital Elevation Model) with road networks was suggested and the proper spatial resolution of DEM was identified finer than 15 m. To test the model applicability, 32 points on the road networks were selected and the hydrographs of each point were generated. The test showed reasonable results that increase the road runoff from the high elevation roads to the low elevation roads and the road runoff considering rainwater drainage from the road also showed reasonable results.

• Elastomers and Composites
• /
• 제52권3호
• /
• pp.216-223
• /
• 2017

The additive manufacturing technology, also called 3D printing, is growing fast. There are several methods for 3D printing. Fused deposition modeling (FDM) type 3D printing is the most popular method because it is simple and inexpensive. Moreover, it can be used for printing various thermoplastic materials. However, it contains the cooling of layered road and causes thermal shrinkage. Thermal shrinkage should be controlled to obtain high-quality products. In this study, temperature distribution and cooling behavior of a layered road with cooling are studied through computer simulation. The thermal shrinkage of the layered road was simulated using the calculated temperature distribution with time. Shape variation of the layered road was predicted as cooling proceeded. Stress between the bed and the layered road was also predicted.This stress was considered as the detaching stress of the layered road from the bed. The simulations were performed for various thermal conductivities and temperatures of the layered road, bed temperature, and chamber temperature of a 3D printer. The simulation results provide detailed information about the layered road for FDM type 3D printing under operational conditions.

• 도로교통
• /
• 통권83호
• /
• pp.63-66
• /
• 2001

"An intergrated Modeling System for the Estimation of Motor Vehicle Emissions" by Theodoros Zareharidis and Zissis Sameras. JOURNAL of the Air & Waste Management Association.

• Environmental Engineering Research
• /
• 제25권3호
• /
• pp.366-373
• /
• 2020

The autonomous vehicles (AVs) could make a positive or negative impact on reducing mobile emissions. This study investigated the changes of mobile emissions that could be caused by large-scale adoption of AVs. The factors of road capacity increase and speed limit increase impacts were simulated using a conceptual modeling approach that combines a hypothetical speed-emission function and a traffic demand model using a virtual transportation network. The simulation results show that road capacity increase impact is significant in decreasing mobile emissions until the market share of AVs is less than 80%. If the road capacity increases by 100%, the mobile emissions will decrease by about 30%. On the other hand, driving speed limit increase impact is significant in increasing mobile emissions, and the environmentally desirable speed limit was found at around 95 km/h. If the speed limit increases to 140 km/h, the mobile emissions will increase by about 25%. This is because some vehicles begin to bypass the congested routes at high speeds as speed limit increases. Based on the simulation results, it is clear that the vehicle platooning technology implemented at reasonable speed limit is one of the AV technologies that are encouraging from the environmental point of view.

• 한국산학기술학회논문지
• /
• 제15권2호
• /
• pp.1195-1203
• /
• 2014

최근 표준으로 등록된 IFC(Industry Foundation Classes)4는 건축시설의 형상요소 표현에 한정될 뿐 도로, 교량 및 터널 등의 토목시설에 대한 형상표준을 정의하고 있지 않아 여전히 토목 형상모델의 교환을 위한 상호운용성에 제약이 있다. 특히 도로시설은 중심선형에 따라 모델링되는 선형적 특성을 가지며, 프로젝트 별로 형상이 서로 상이하여 표준화된 도로정보모델을 구축하는 것이 곤란하다. 따라서 본 연구에서는 도로의 형상정보모델 개발을 위해 3차원 설계 프로세스 관점에서 도로를 구성하는 구조요소 및 속성을 도출하는 것이 목적이다. 이를 위해 본 연구는 도로설계를 위해 활용되는 도로설계편람, 지침, 시방서 및 기하설계 기준 등의 정보를 분석하여 도로 구조물의 형상 요소와 속성을 추출한다. 도출된 형상은 엔티티(Entity) 항목으로 정의하고 가상 도로모델을 통해 정의된 도로 형상모델의 위계구조를 검토한다. 도출된 도로의 세부 구조 요소 및 속성은 인프라 분야의 BIM(Building Information Modeling)환경을 구축하기 위한 3차원 형상정보로 활용되며, 도로의 구체적인 형상, 타입 및 속성을 세분화하여 도로분야의 IFC로 확장하기 위한 기초자료로 활용될 것으로 기대된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.833-841
• /
• 2008

Recently, the upheaval generation in the road which is under service had been reported. Due to the upheaval generation, total 4 lanes were forced to curtail to 3 lanes, and traffic was delayed. In normal situation of cut-slopes in korea, that condition is hard to detect since most cut-slopes contain discontinuous material, that is rock. Common collapses in rock-slopes is wedge failure, plane failure and toppling failure which is all individual mechanism of discontinuous rock mass. In contrast, such upheaval in the road in front of cut-slope can be generated only when circular movement is triggered within the cut-slope. In this sense, rock-slopes barely show any kind of movement in the road locates at the front of them. Numerical analysis is general method in simulation of slope displacement and evaluation of safety. However, numerical analysis programs which are related with rock-slopes are not able to simulate such upheaval movement because that programs are based on discontinuous modeling mechanism. In addition, although numerical analysis programs which are based on FEM/FDM and thus utilize continuous modeling mechanism are able to simulate circular movement and upheaval situation, they have weakness in reflecting discontinuities of rock-slope itself. In this study, detailed in-site investigation and numerical analysis based on in-site condition were performed in order to expect upheaval movement in the road. In this procedure, the FLAC program which uses continuous modeling method was utilized, and new approach reflecting discontinuity developed toward the road with a ubiquitous joint model was tried to derive reliable analysis result.

• Journal of Platform Technology
• /
• 제9권4호
• /
• pp.3-9
• /
• 2021

이 논문에서는 차량 또는 도로 인프라 센서에 의해 검출된 도로상의 각 객체들 간의 상황인지를 효과적으로 하기 위해서 그래프 데이터 모델을 도입한다. 제안하는 방법은 도로상의 각 객체들을 그래프의 정점(Vertex)로, 객체들 간의 관계를 그래프의 간선(Edge)로 모델링하여 그래프 데이터베이스를 구축하고, 객체의 속성과 간선의 속성을 실시간으로 업데이트한다. 이때 간선으로 표현되는 객체들 간의 관계는 각 객체의 위치, 이동방향, 이동속도 등을 고려하여 객체들 간에 근접 가능성이 있을 경우 설정한다. 또한, 제안하는 그래프 모델링 방법을 통해 표현한 도로 객체 그래프 데이터베이스를 실시간으로 업데이트하기 위해 그래프 정점과 간선에 대한 공간 색인 기법을 제안한다. 제안하는 색인기법 기반의 그래프 데이터베이스 업데이트 성능을 평가하기 위해서 색인 없이 업데이트하는 방법과 비교하였으며 비교결과 제안하는 방법이 10배 더 빠르게 업데이트를 할 수 있음을 확인하였다.