• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.454-457
• /
• 2007

This paper describes the design of steel grating for prevention of flooded area in road. These are not the points to be specially load considered, only shapes. Therefor, it have to check road loads and to set a standard for road specification in road design.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1398-1400
• /
• 1996

In this paper, a method of the decision of the road direction for ALV(Autonomous Land Vehicle) road following by region-based segmentation is presented. The decision of the road direction requires extracting road regions from images in real-time to guide the navigation of ALV on the roadway. Two thresholds to discriminate between road and non-road region in the image are easily decided, using knowledge of problem region and polygonal approximation that searches multiple peaks and valleys in histogram of a road image. The most likely road region of the binary image is selected from original image by these steps. The location of a vanishing point to indicate the direction of the road can be obtained applying it to X-Y profile of the binary road region again. It can successfully steer a ALV along a road reliably, even in the presence of fluctuation of illumination condition, bad road surface condition such as hidden boundaries, shadows, road patches, dirt and water stains, and unusual road condition. Pyramid structure also saves time in processing road images and a real-time image processing for achieving navigation of ALV is implemented. The efficacy of this approach is demonstrated using several real-world road images.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.3
• /
• pp.1-5
• /
• 1998

In this paper, it was Proposed to extract road area automatically in general road guide map. Line tracing proposed in 〔1〕 was used basic extraction method, but by choosing starting pixel automatically iterative user interaction could be removed in this paper. this was possible by classifying and analysis color of each road. The usefulness of the proposed method was proved through experiments with various color printed maps.

• International Journal of Highway Engineering
• /
• v.16 no.6
• /
• pp.191-198
• /
• 2014

PURPOSES : Safety consciousness can be the first factor to hinder the acceptance of design alternative, which moderates the applied design criteria in order to adapt the road to the natural terrain condition. METHODS : The method which enables to check the safety of design alternative by using design consistency concept is suggested. The method is based on the linked or interactive analysis between terrain and road alignment. Real design example is considered as a guide how to apply the method and the analysis result is discussed with the future research. RESULTS : Suggested method can be used for designers as a tool to review their design outputs can be safe as much as the original design. So, designers have the more objective judgement on their designs and have the confidence on their designs. CONCLUSIONS : The method is expected to be used as a tool to see the safety consciousness in an objective view, so any possible conflicts between designers and design-related personnels caused by the terrain-oriented design can be solved.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.197-203
• /
• 2003

Korea Highway Corporation(KHC) began the ambitious KHC Test Road construction project from 1997. It is 7.7km long two-lane highway next to the mainline of Jungbu Inland Expressway. The KHC Test Road construction was completed at the December 2002. It is composed of twenty-five PCC test pavement sections. Section design parameters are (1) concrete slab thickness, (2) base type, (3) base thickness (12, 15, and 18cm), and (4) pavement type. Twenty-five PCC test pavement sections contain 1241 sensors to evaluate the behavior of pavement system under traffic load and environmental change. The behavior of pavement systems will be identified by the observation of sensor measurement and pavement distress survey from test pavement sections. The Test Road research outcome will validate the Korean Pavement Design Guide which is develop by on-going funded research from the Ministry of Construction and Transportation.

• Journal of the Korean Society of Safety
• /
• v.24 no.5
• /
• pp.101-112
• /
• 2009

Recently, with the existing speed-management by law enforcements and physical speed-reduction facilities, the country newly adopted Driver Feedback Sign (DFS) system, which displays driving speed in order to guide the driver to an advisable driving condition. DFS is mainly used in school zones due to reasons related to the ITS. Accordingly, because it is predictable that DFS will result in speed-reduction without legal forces and would have an effect on physical speed-reduction facilities, intersection, crosswalks, and road-alignments, this study will try to verify the efficiency of DFS by researching the vehicle speed in national highways and school zones, which have similar conditions to the urban arterial road. In consequence, on national highways, the drivers had a tendency to travel according to the road-environment such as urban arterial road and not reduce speed voluntarily. In school zones, drivers tend to reduce speed in mornings and afternoons when children travel to school or home, showing that the resulting effect is different according to the road-environment where DFS is installed, and the time slot of the DFS.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.3
• /
• pp.347-350
• /
• 2009

In this study, it was studied about the improved road light design for drivers and pedestrians using forward or reverse ray-tracing method. Many of conventional road lights are not suitable for drivers and pedestrians because it has some serious problems such as glare effect or randomicity of illuminated areas. It was oriented from customary design method which was pointed at simple target such as luminance or electrical power. But it was not truth any more that the high luminance or electrical power consumption mean more bright and good road light. We studied ray-tracing method for road light reflector design to get the several goals. It means that good road light has easy for drivers and pedestrians eyes and illuminating objects on the road clearly. So, we set the design targets such as uniformity on the road area per one road light, shading angles and continuous luminance uniformity on the long distance road. We designed ideal road light conditions using ray-tracing method. We set the height of drivers and pedestrians eyes and calculated design guideline to make above design targets. Then we designed road light reflector using reverse ray-tracing method. And we achieved same luminance on the road almost half power consumption because we reduced loss of light. We achieved ideal design guide as 75 degrees of shading angles and 0.5 of luminance uniformity on the road area. It is superior than conventional road light ability such as 0.35 of luminance uniformity of 400 watts power consumption lamp. Finally, we suggested reflector design for 250 watts power consumption CDM Iight source.

• The Journal of Engineering Geology
• /
• v.24 no.3
• /
• pp.333-341
• /
• 2014

The construction of roads, tunnels, and bridges results in changes to the local terrain that may influence the ground safety factor, which represents the stability of geotechnical structures. In this study, we assessed construction sites that had collapsed as a result of terrain change, and then simulated variation in the ground safety factor with respect to terrain change caused by road construction. We assumed steep slopes to simulate changes in terrain in a mountainous area and assumed that earthworks took place for road construction by cutting a platform into the slope and altering the slope angle of the terrain both above and below the road. We calculated values of the ground safety factor through a stability analysis of the slope both above and below the road, and examined the variation in the safety factor of the above- and below-road slopes with respect to changes in road width. We found that if the slope angle was the same above and below the road, then the change in the ground safety factor during/after road construction occurred in the slope below the road, and if the slope angle above the road differed from that below, then the change occurred in both the above- and below-road slopes. Furthermore, the ground safety factor was essentially constant for road widths exceeding 2-6 m, depending on both above- and below-road slope angle. The findings of this study can be used to guide the management of construction sites and to assess changes in ground stability during road construction work, particularly in the early stages of earthworks, when the road width is narrow.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.327-328
• /
• 2008

In this study, it was studied about the improved road light design for drivers and pedestrians using ray- or reverse ray-tracing method. Many of conventional road lights are not suitable for drivers and pedestrians because it has some serious problems such as glare effect or randomicity of illuminated areas. It was oriented from customary design method which was pointed at simple target such as luminance or electrical power. But it was not truth any more that the high luminance or electrical power consumption mean more bright and good road light. We studied ray-tracing method for road light reflector design to get the several goals. It means that good road light has easy for drivers and pedestrians eyes and illuminating objects on the road clearly. So, we set the design targets such as uniformity on the road area per one road light, shading angles and continuous luminance uniformity on the long distance road. We designed ideal road light conditions using ray-tracing method. We set the height of drivers and pedestrians eyes and calculated design guideline to make above design targets. Then we designed road light reflector using reverse ray-tracing method. And we achieved same luminance on the road almost half power consumption because we reduced loss of light. We achieved ideal design guide as 75 degrees of shading angles and 0.5 of luminance uniformity on the road area. Finally, we suggested reflector design for 250 watts power consumption CDM light source.

• Proceedings of the KIEE Conference
• /
• 2008.09a
• /
• pp.140-143
• /
• 2008

In this study, it was studied about the improved road light design for drivers and pedestrians using ray- or reverse ray-tracing method. Many of conventional road lights are not suitable for drivers and pedestrians because it has some serious problems such as glare effect or randomicity of illuminated areas. It was oriented from customary design method which was pointed at simple target such as luminance or electrical power. But it was not truth any more that the high luminance or electrical power consumption mean more bright and good mad light. We studied ray-tracing method for road light reflector design to get the several goals. It means that good road light has easy for drivers and Pedestrians eyes and illuminating objects on the road clearly. So, we set the design targets such as uniformity on the road area per one road light, shading angles and continuous luminance uniformity on the long distance road. We designed ideal road light conditions using ray-tracing method. We set the height of drivers and pedestrians eyes and calculated design guideline to make above design targets. Then we designed road light reflector using reverse ray-tracing method. And we achieved same luminance on the road almost half power consumption because we reduced loss of light. We achieved ideal design guide as 75 degrees of shading angles and 0.5 of luminance uniformity on the road area. Finally, we suggested reflector design for 250 watts power consumption CDM light source.