• Journal of Sensor Science and Technology
• /
• v.28 no.2
• /
• pp.94-100
• /
• 2019

Drivable area detection is a major task in advanced driver assistance systems. For drivable area detection, several studies have proposed vision-sensor-based approaches. However, conventional drivable area detection methods that use vision sensors are not suitable for environments with changes in road elevation. In addition, if the boundary between the road and vegetation is not clear, judging a vegetation area as a drivable area becomes a problem. Therefore, this study proposes an accurate method of detecting drivable areas in environments in which road elevations change and vegetation exists. Experimental results show that when compared to the conventional method, the proposed method improves the average accuracy and recall of drivable area detection on the KITTI vision benchmark suite by 3.42%p and 8.37%p, respectively. In addition, when the proposed vegetation area removal method is applied, the average accuracy and recall are further improved by 6.43%p and 9.68%p, respectively.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.6
• /
• pp.797-807
• /
• 2008

This paper proposes a new algorithm of extracting forward vehicle areas using the acquired lanes and road area information on road images with complex background to improve the efficiency of the vehicle detection. In the first stage, lanes are detected by taking into account the connectivity among the edges which are determined from a method of chain code. Once the lanes proceeding to the same direction with the running vehicle are detected, neighborhood roadways are found from the width and vanishing point of the acquired roadway of the running vehicle. And finally, vehicle areas, where forward vehicles are located on the road area including the center and neighborhood roadways, are extracted. Therefore, the proposed scheme of extracting forward vehicle area improves the rate of vehicle detection on the road images with complex background, and is highly efficient because of detecting vehicles within the confines of the acquired vehicle area. The superiority of the proposed algorithm is verified from experiments of the vehicle detection on road images with complex background.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.1
• /
• pp.116-125
• /
• 2014

Road conditions can provide important information for driving safety in driving assistance systems. The input images usually include unnecessary information and they need to be analyzed only in a region of interest (ROI) to reduce the amount of computation. In this paper, a vision-based road ROI determination algorithm is proposed to detect the road region using the positional information of a vanishing point and line segments. The line segments are detected using Canny's edge detection and Hough transform. The vanishing point is traced by a Kalman filter to reduce the false detection due to noises. The road ROI can be determined automatically and adaptively in every frame after initialization. The proposed method is implemented using C++ and the OpenCV library, and the road ROIs are obtained from various video images of black boxes. The results show that the proposed algorithm is robust.

• Proceedings of the IEEK Conference
• /
• 2000.06d
• /
• pp.163-166
• /
• 2000

Real-time traffic detection scheme based on Computer Vision is capable of efficient traffic control using automatically computed traffic information and obstacle detection in moving automobiles. Traffic information is extracted by segmenting vehicle region from road images, in traffic detection system. In this paper, we propose the advanced segmentation of vehicle from road images using multiple local region information. Because multiple local region overlapped in the same lane is processed sequentially from small, the traffic detection error can be corrected.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.766-771
• /
• 2002

Automatic change detection based on the vector-to-raster comparison is hard especially in high-resolution image. This paper proposes a method to designate roads in high-resolution image in sequential manner using the information from vector map in which Hough transform is used for reliability. By its linearity, the road of urban areas in a vector map can be easily parameterized. Following some pre-processing to remove undesirable objects, we obtain the edge map of raster image. Then the edge map is transformed to a parameter space to find the selected road from vector map. The comparison is done in the parameter space to find the best matching. The set of parameters of a road from vector map is treated as the constraints to do matching. After designating the road, we may overlay it on the raster image for precise monitoring. The results can be used for detection of changes in road object in a semi-automatic fashion.

• Journal of Digital Convergence
• /
• v.14 no.8
• /
• pp.253-259
• /
• 2016

Regarding the research on lane recognition, continuous studies have been in progress for vehicles to navigate autonomously and to prevent traffic accidents, and lane recognition and detection have remarkably developed as different algorithms have appeared recently. Those studies were based on vision system and the recognition rate was improved. However, in case of driving at night or in rain, the recognition rate has not met the level at which it is satisfactory. Improving the weakness of the vision system-based lane recognition and detection, applying sensor convergence technology for the response after accident happened, among studies on lane detection, the study on the curve road detection was conducted. It proceeded to study on the curve road detection among studies on the lane recognition. In terms of the road detection, not only a straight road but also a curve road should be detected and it can be used in investigation on traffic accidents. Setting the threshold value of curvature from 0.001 to 0.06 showing the degree of the curve, it presented that it is able to compute the curve road.

• Journal of Korea Multimedia Society
• /
• v.19 no.6
• /
• pp.979-989
• /
• 2016

Traversable region detection is an essential step for advanced driver assistance systems and self-driving car systems, and it has been conducted by detecting lanes from input images. The performance can be unreliable, however, when the light condition is poor or there exist no lanes on the roads. To solve this problem, this paper proposes an algorithm which utilizes the information about the number of lanes and texture analysis. The proposed algorithm first specifies road region candidates by utilizing the number of lanes information. Among road region candidates, the road region is determined as the region in which texture is homogeneous and texture discontinuities occur around its boundaries. Traversable region is finally detected by dividing the estimated road region with the number of lanes information. This paper combines the proposed algorithm with a lane detection-based method to construct a system, and simulation results show that the system detects traversable region even on the road with poor light conditions or no lanes.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.1
• /
• pp.17-21
• /
• 2011

This paper presents a real- time detection of on-road succeeding vehicles based on low level edge features and a boosted cascade of Haar-like features. At first, the candidate vehicle location in an image is found by low level horizontal edge and symmetry characteristic of vehicle. Then a boosted cascade of the Haar-like features is applied to the initial hypothesized vehicle location to extract the refined vehicle location. The initial hypothesis generation using simple edge features speeds up the whole detection process and the application of a trained cascade on the hypothesized location increases the accuracy of the detection process. Experimental results on real world road scenario with processing speed of up to 27 frames per second for $720{\times}480$ pixel images are presented.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.3
• /
• pp.27-34
• /
• 2017

We propose a cascade lane detector that uses biased discriminant analysis (BDA) to work effectively even when there are various external factors on the road. The proposed cascade detector was designed with an existing lane detector and the detection module using BDA. By placing the BDA module in the latter stage of the cascade detector, the erroneously detected results by the existing detector due to sunlight or road fraction were filtered out at the final lane detection results. Experimental results on road images taken under various environmental conditions showed that the proposed method gave more robust lane detection results than conventional methods alone.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.1
• /
• pp.88-93
• /
• 2012

Lane detection methods using camera, which are part of the driver assistance system, have been developed due to the growth of the vehicle technologies. However, lane detection methods are often failed by varying road conditions such as rainy weather and degraded lanes. This paper proposes a method for lane detection which is robust in varying road condition. Lane candidates are extracted by intensity comparison and lane detection filter. Hough transform is applied to compute the lane pair using lane candidates which is straight line in image. Then, a curved lane is calculated by using B-Snake algorithm. Also, weighting value is computed using previous lane detection result to detect the lanes even in varying road conditions such as degraded/missed lanes. Experimental results proved that the proposed method can detect the lane even in challenging road conditions because of weighting process.