• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.3
• /
• pp.282-289
• /
• 2019

Reflective and solar LED road studs are being used as a way of securing visibility for road environments. Road markers have various advantages and disadvantages in terms of versatility, efficiency, simplicity and visibility as individual products of reflective type and solar LED. However, in addition to the above, it is possible to prevent secondary accident after accident, It has a common drawback that it is difficult to have. In this paper, we propose a road stud system incorporating a wireless control function using RF - based communication with existing solar LED road studs and a system for controlling them. The proposed system is called the smart road stud system and it can control the equipment through the central control unit and the relay unit connected to the central control room by incorporating the RF communication function in the existing solar LED road stud. In addition, since it is possible to control the lighting method, color, etc. according to the road condition, it is possible to provide the driver with the state of the road to perform the function for preventing the second accident after the accident. It also adds features that minimize the ongoing power consumption of LED and RF communications. In order to verify the validity of the proposed system, prototypes were produced and it was confirmed that it is possible to act as a university for prevention of accident after accident by linking with other traffic system besides accident prevention function by securing existing visibility.

• Steel and Composite Structures
• /
• v.44 no.5
• /
• pp.741-752
• /
• 2022

Earlier works have shown that excessive shear stiffness at the steel-concrete interface causes a non-uniform distribution of shear force in composite structures. When the shear studs are wrapped at the fixed end with flexible materials with a low elastic modulus, the shear stiffness at the interface is reduced. The objective of this study was to investigate the effect of silicone rubber-sleeve mounted on shear studs on the shear stiffness of steel-concrete composite structures. Eighteen push-out tests were conducted to investigate the mechanical behavior of silicone rubber-sleeved shear stud groups (SRS-SSG). The dimension and arrangement of silicon rubber-sleeves (SRS) were taken into consideration. Test results showed that the shear strength of SRS-SSG was higher than that of a shear stud group (SSG), without SRS. For SRS-SSG with SRS heights of 50 mm, 100 mm, 150 mm, the shear strengths were improved by 13%, 20% and 9%, respectively, compared to the SSG alone. The shear strengths of SRS-SSG with the SRS thickness of 2 mm and 4 mm were almost the same. The shear stiffness of the SRS-SSG specimens with SRS heights of 50 mm, 100 mm and 150 mm were 77%, 67% and 66% of the SSG specimens, respectively. Test results of specimens SSG-1 and predicted values based on the three design specifications were compared. The nominal single stud shear strength of SSG-1 specimens was closest to that calculated by the Chinese Code for Design of Steel Structures (GB50017-2017). An equation is proposed to consider the effects of SRS for GB50017-2017, and the predicted values based on the proposed equation agree well with the tested results of SRS-SSG.

• Journal of the Korean Institute of Rural Architecture
• /
• v.7 no.2
• /
• pp.31-47
• /
• 2005

This study is to inspect and analyse the historical background, spacial organization and architectural features about the traditional government office building of Gangwon Gamyoung(the supreme local government office of Gangwondo in Chosun dynasty). The results are as follows. - Gangwon Gamyoung was located at the center of Gangwondo in consideration of distance to each small local office. And also it was located in consideration of geographical connection between Hanseong(today's Seoul). - The spatial organization of Gamyoung was divided into the three parts of entrance space, government office building space and backyard space. The entrance space was composed of three gates(Pojungru-Jungsammun-Naesammun). The government office building Space was consisted of business and living building as center of Sunhwadang(the main office building). And the backyard space was composed of Yonji(pond), Jungja(bower), and so on - The way to enter the space of Gamyoung follows the order from Pojungru(the first & outer main gate with a bower), Jungsammun(the second & intermediate gate), Naesammun(the third & inner gate) to Sunhwadang at last. - There were a beautiful Yonji(pond) which to be rectangular type and to have a round island with Bongraegak(bower) at Gamyoung backyard, the drain conduit and pedestrian road covered with pebble in the ground.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.405-416
• /
• 2005

The rubblization technique is breaking the aged concrete pavement slab into rubblized concrete aggregate, and use it as an base material at its original position, then builds overlay above the rubblized base. This method has been successively used in USA due to the advantage of good contructibility, cost-effectiveness as well as the capability of preventing of reflection cracks. However, constructibility and economic performance of rubblization on typical Korean concrete pavements needed to be investigate since to typical Korean concrete pavements have thick slab, as well include lean concrete subbase course. This stud explored optimum breaking depth and suggested minimum 10cm based on reflection crack simulation test. Also proper head shape and impact energy were investigated based on small breaking field tests. It was found that $127kg/cm^2$ of stress with 52.3% of head contact area are breaking requirement. Also, Multi-head type breaker suitable for Korean condition was designed and developed. This multi-head type breaker was designed to rubblize old concrete to the suggested optimum rubblized-depth and rubblized-concrete-aggregate size to prevent reflection crack and maintain high bearing capacity. This machine was used for the test of rubblization of old concrete pavement on a non-use old concrete and a in-serviced road. In these two tests, engineering properties of rubblized base and constructability and cost were investigated. In both tests, the old concrete rubblized to targeted size and depth, and high-level bearing capacity was achieved. Also, superior constructability and lower cost compared with traditional reconstruction was examined.

• Journal of the Society of Disaster Information
• /
• v.13 no.3
• /
• pp.313-321
• /
• 2017

In order to investigate the basic performance of the high strength anchor for asphalt road subjected to tensile load, the static pullout test was carried out and the pullout strength of the asphalt anchor was analyzed. In the pullout test, the depth of anchor, depth of pavement, diameter of anchor, type of anchor, experimental temperature, epoxy type and amount of anchor were used as test variables. As a result, the steel strength of asphalt anchor was 1.08 times higher than that of conventional concrete anchor, therefore it is considered appropriate to use the steel strength formula of concrete anchor for asphalt anchor. Compared with the proposed formula, the pullout load obtained from the test of the asphalt anchor was within ${\pm}10%$. The ratio of the projected area of the asphalt anchor is similar as that of the concrete anchor.

• International Journal of Highway Engineering
• /
• v.12 no.3
• /
• pp.27-35
• /
• 2010

Asphalt Plug Joint(APJ) is an buried expansion joint that enabling the smooth connection of expansion gap and road pavement by filling the gap with bituminous mixture of 20% bitumen and 80% aggregate by weight, so it secures evenness and expansion or contraction using the material's properties. Although APJ is designed to have a 6-7 year lifecycle, there are some cases where it is damaged within the first six months. This early damage cause traffic congestion due to frequent repair works, and social cost exceeding the installation cost of the joint. So, in this research, we have developed a new system of Buried Folding Lattice Joint(BFLJ) which can overcome the disadvantages of APJ, and have analyzed and compared it's performance with the conventional APJ through experiment with specimens. As a result of the experiment, APJ had crack formation on both ends of the gap plate, spreading to the surface of the expansion joint. With this result, we can conclude that the reason for early damage is the tension failure due to the concentration of strain in the asphalt mixture along the end of gap plate and the debonding along the joint section. In contrast, the newly developed BFLJ induced even transformation in the joint by applying moving stud and high performance material, and resolved APJ's disadvantage of strain concentration. Therefore, it could be seen that the newly developed BFLJ could overcome the disadvantages of APJ and prevent early damage.