• 자동차안전학회지
• /
• 제13권3호
• /
• pp.41-46
• /
• 2021

The number of big traffic accident cases of pedestrian death appeared to be minor, however compared to death rate in car to car accidents is very high and quite a few of the pedestrian death rates among all traffic accidents are counted to be almost 40%. Previous pedestrian safety studies were mostly aimed at reducing the degree of pedestrian injuries from a vehicle to pedestrian collision, and less at preventing a collision itself. This research was conducted with a method of using road facilities to prevent vehicles from rushing into the sidewalk. This research used one of the collision analyzing programs, called PC-Crash to simulate the vehicle rushing into the sidewalk. Based on the program, it could derive an optimal safe zone location where the pedestrian can wait for the pedestrian light safely. Also, changing road facilities such as pedestrian light pillars or signal controllers can widen 440% compared to the present safe zone. Accordingly, researchers have to consider a method to analyze and apply pedestrian safe zones along with road facilities location when designing a road.

• 산업기술연구
• /
• 제29권B호
• /
• pp.133-137
• /
• 2009

This paper presents the development of smart road line lamp system consisting light control device. It can perform the individual power control or partial on/off control of a LED lamp by control center and can detect the error of the LEDs by current sensing. Also, the ability to control the brightness and period of on/off by detecting the car's existence. This light control circuit consists of road line lamp unit device. It can give a lot of solutions when the server, which controls the whole system, is operated through CDMA(Code-Division Multiple Access) network.

• 한국도로학회논문집
• /
• 제16권3호
• /
• pp.1-8
• /
• 2014

PURPOSES : The purpose of this paper is to demonstrate to the practicing engineers, how to apply the advanced composite materials theory to the road structures. For general construction material used, there is certain theoretical limit in sizes. For super road structure construction, the reduction in panel weight is the first step to take in order to break such size limits. METHODS : For a typical road structures panel, both concrete and advanced composite sandwich panels are considered. The concrete panel is treated as a special orthotropic plate. RESULTS : All types of advanced composite sandwich panels are considered as a self-weights less than one tenth of that of concrete panel. The concrete panel is treated as a special orthotropic plate to obtain more accurate result. CONCLUSIONS : Advanced composite sandwich panels are considered as a self-weights less than one tenth (10%) of that of concrete panel, with deflections less than that of the concrete panel. This conclusion gives good guide line for design of the light weight of road structures.

• 한국도로학회:학술대회논문집
• /
• 한국도로학회 2004년도 학술발표회 논문집
• /
• pp.199-202
• /
• 2004

• 한국산학기술학회논문지
• /
• 제20권12호
• /
• pp.758-764
• /
• 2019

한국형 전술차량(KLTV)의 섀시는 장비 운용 특성상 경량화 설계기술을 적용한 프레임 온 바디 구조를 적용하고 있다. 군용차량은 민수차량 대비 가혹한 도로 환경에서 사용되고 있으며, 특히 경사가 가파른 산악지형에서 운용되는 경우가 많다. 이러한 장비 운용 특성으로 인해 일부 전방부대 차량에서 프레임을 구성하는 크로스멤버 용접부위에 균열이 확인되었다. 이에 본 논문에서는 균열이 발생된 부대를 포함한 다양한 운용 도로 환경 파악을 통해 노면 가혹도 분석을 실시하였다. 그 결과 일부 부대의 전술도로는 차량 개발 시 내구도 주행시험을 실시한 도로보다 약 1.6배 이상 훨씬 가혹한 조건임을 확인하였다. 또한 전술차량 프레임에 대한 설계 검토 및 고품 분석을 통해 용접부위 균열 발생 근본원인을 파악하고, 설계 및 공정개선 방안을 도출하였다. 제안된 개선안은 실차 적용을 통한 검증시험으로 효과성을 확인하였다. 아울러 내구도 주행시험에 대한 발전방향을 제시함으로써 향후 유사 차량 개발 시 참고자료로 활용할 수 있도록 하였다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 추계 학술발표회논문집
• /
• pp.288-294
• /
• 2003

Increasing the volume of traffic on the roads causes social and economical problems such as increasing air-pollution and distribution cost. Prefabricated light weight bridge becomes a possible solution for these problems in the urban area where it is difficult to construct new one or expend the existing road. There are some merits in this kind of bridge. First, the design live and dead loads are minimized by allowing only passenger cars. Second employing prefabrication construction scheme reduces the construction time. Third, there is no need to buy land if the elevation road is placed on the top of existing one. In seismic design of bridges, base isolation has been an effective solution when the bridge has stiff piers and a heavy superstructure. The prefabricated light weight bridge has different dynamic characteristics from the ordinary bridges. In this paper, the applicability of base isolators such as lead rubber bearing and elastomeric bearing, to prefabricated light weight bridge is examined.

• 한국대기환경학회지
• /
• 제28권1호
• /
• pp.94-104
• /
• 2012

The purpose of this research is to quantify the compliance of on-road emission from a light duty diesel vehicle, based on a comparison to emission regulation standard. $NO_x$, CO and THC emissions were measured using a portable device on a selected real-world driving route with a length of approximately 22 km. On-road measurements were repeated by 10 times on a same route to reflect variability in traffic conditions. A test route was divided into 22 road links with length of 1 km to analyze emission results with higher spatial resolution. The average emissions of $NO_x$, CO and THC over total travel distance, which is approximately 220 km, were quantified to be in compliance with emission regulation standards. Under higher spatial resolution, $NO_x$ concentration exceeded a standard in 92 links out of 220 links. The extended time in stop period and the stop-and-go driving cycle were identified as two important reasons for increased $NO_x$ emissions in observed cases. Heavy traffics showed higher $NO_x$ emissions than free flow. These results indicate that the real-world vehicle emissions might exceed the compliance level associate with traffic conditions. Another interesting observation of this research is that the on-road emission characteristics can be independent to the average speed of road links with higher spatial resolution. Variability in on-road emission might not be fully described by solely relying on an average speed, because variability in traffic conditions and road conditions can influence on real-world vehicle emissions.

• 한국ITS학회:학술대회논문집
• /
• 한국ITS학회 2008년도 제7회 추계학술대회 및 정기총회
• /
• pp.565-569
• /
• 2008

• 한국도로학회논문집
• /
• 제14권4호
• /
• pp.125-131
• /
• 2012

PURPOSES : Road lighting facilities increase the visibility of road at night in order to improve traffic driver safety and comfort. Generally speaking, current pole lighting has a tendency to create problems of glare and flicker. The phenomenon of glare gives discomfort due to increase of scattered light, when high luminance is in driver's field of view. The phenomenon of flicker occurs due to the driver passing through discontinuous pockets of pole lighting areas. These phenomenon increase eye strain and decrease driver safety. METHODS : Low height line lighting that distributes light lower than driver's eye level has been developed and evaluated to reduce the problems linked to current pole lighting. A test was undertaken with 4 conditions(turn on the general pole lighting, turn off alternate pole lighting, turn on the line lighting and line lighting with 50% dimming). A driver written survey was conducted in order to gain driver feedback. RESULTS : Pupil size and brow frequency compared with degree in pole lighting are reduced. CONCLUSIONS : Low height line lighting environment makes drivers more comfortable than pole lighting environment and is positive lighting method in the energy saving and landscape aspect.

• 한국멀티미디어학회논문지
• /
• 제19권6호
• /
• pp.979-989
• /
• 2016

Traversable region detection is an essential step for advanced driver assistance systems and self-driving car systems, and it has been conducted by detecting lanes from input images. The performance can be unreliable, however, when the light condition is poor or there exist no lanes on the roads. To solve this problem, this paper proposes an algorithm which utilizes the information about the number of lanes and texture analysis. The proposed algorithm first specifies road region candidates by utilizing the number of lanes information. Among road region candidates, the road region is determined as the region in which texture is homogeneous and texture discontinuities occur around its boundaries. Traversable region is finally detected by dividing the estimated road region with the number of lanes information. This paper combines the proposed algorithm with a lane detection-based method to construct a system, and simulation results show that the system detects traversable region even on the road with poor light conditions or no lanes.