• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.5
• /
• pp.127-134
• /
• 2021

When constructing a tunnel on a stable ground, stress is changed in the ground during excavation stage and installation of ground support materials. In the standards for safety evaluation of structures in use, it is suggested to perform numerical analysis reflecting the excavation stage. But method of seismic performance evaluation was not presented. Therefore, in this study, numerical analysis was performed with different analysis methods, and the results were compared and analyzed. As a result of the numerical analysis, seismic wave applied in the horizontal direction were no difference depending on the analysis methods. However, there was a big difference in the result according to the evaluation methods of tunnel member forces. When reviewing with the strength design method, the structure performance could be not satisfied depending on the existence or nonexistence of reinforcing bars. Based on these research results, it is suggested that the interpretation method should be clearly presented and reflected in the relevant standards.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.25 no.6
• /
• pp.51-64
• /
• 2022

Along with the urbanization, the risk of urban flooding due to climate change is increasing. Flood regulation, one of the ecosystem services, is implemented in the different level of function of flood risk mitigation by the type of ecosystem such as forests, arable land, wetlands etc. Land use changes due to development pressures have become an important factor in increasing the vulnerability by flash flood. This study has conducted evaluating the urban flood regulation service using InVEST UFRM(Urban Flood Risk Model). As a result of the simulation, the potential water retention by ecosystem type in the event of a flash flood according to RCP 4.5(10 year frequency) scenario was 1,569,611 tons in urbanized/dried areas, 907,706 tons in agricultural areas, 1,496,105 tons in forested areas, 831,705 tons in grasslands, 1,021,742 tons in wetlands, and 206,709 tons in bare areas, the water bodies was estimated to be 38,087 tons. In the case of more severe 100-year rainfall, 1,808,376 tons in urbanized/dried areas, 1,172,505 tons in agricultural areas, 2,076,019 tons in forests, 1,021,742 tons in grasslands, 47,603 tons in wetlands, 238,363 tons in bare lands, and 52,985 tons in water bodies. The potential economic damage from flood runoff(100 years frequency) is 122,512,524 thousand won in residential areas, 512,382,410 thousand won in commercial areas, 50,414,646 thousand won in industrial areas, 2,927,508 thousand won in Infrastructure(road), 8,907 thousand won in agriculture, Total of assuming a runoff of 50 mm(100 year frequency) was estimated at 688,245,997 thousand won. In a conclusion. these results provided an overview of ecosystem functions and services in terms of flood control, and indirectly demonstrated the possibility of using the model as a tool for policy decision-making. Nevertheless, in future research, related issues such as application of models according to various spatial scales, verification of difference in result values due to differences in spatial resolution, improvement of CN(Curved Number) suitable for the research site conditions based on actual data, and development of flood damage factors suitable for domestic condition for the calculation of economic loss.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.5
• /
• pp.253-273
• /
• 2022

Automated vehicles rely on information collected through sensors to drive. Therefore, the uncertainty of the information collected from a sensor is an important to address. To this end, research is conducted in the field of road and traffic to solve the uncertainty of these sensors through infrastructure or facilities. Therefore, this study developed a traffic cone that can maintaing the gaze guidance function in the construction site by securing sufficient LiDAR detection performance even in rainy conditions and verified its improvement effect through demonstration. Two types of cones were manufactured, a cross-type and a flat-type, to increase the reflective performance compared to an existing cone. The demonstration confirms that the flat-type traffic cone has better detection performance than an existing cone, even in 50 mm/h rainfall, which affects a driver's field of vision. In addition, it was confirmed that the detection level on a clear day was maintained at the 20 mm/h rain for both cones. In the future, improvement measures should be developed so that the traffic cones, that can improve the safety of automated driving, can be applied.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.5
• /
• pp.103-116
• /
• 2022

The South Korean Ministry of Land, Infrastructure, and Transport designated seven automated driving test beds required to evaluate vehicle performance every year for the expansion of mobility services based on automated driving. As a fundamental study, we suggested a necessary example of evaluating the performance with a satisfaction survey for the services before the evaluation. First, we surveyed the perception of automated driving services of users and the public in Sejong-si, South Korea. The survey showed that the users had a higher level of awareness of automated driving technology and intention to use it than the public. Second, the satisfaction survey was conducted on demand-responsive public transportation and automated driving service users. Notably, using the Wilcoxon Rank Sum Test, among the non-parametric statistical analysis methods, we found that safety-related factors affected the overall satisfaction of users of automated driving services. On the other hand, in the case of the demand-responsive public transportation service users, factors related to service convenience affected overall satisfaction. Hence, the results of these surveys are expected to be used as basic data and guidelines to improve the quality of automated driving services and policy establishment.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.6
• /
• pp.225-240
• /
• 2022

Gyeonggi-do comprises several types of areas, including urban, semi-urban, and rural areas. The availability of public transportation services varies depending on the area types, but the fare structure is based on a simple transfer rule, i.e., a transfer is free when completed within 30 minutes. As a result, users in non-urban areas with a poor frequency of public transportation services do not receive transfer discounts because most of the bus routes in these areas have a gap of more than 30 minutes between services. In terms of equality of opportunity, the transfer rule is being applied unfavorably and, as a result, equality of opportunity of the non-urban commuter is severely affected. Therefore, this study analyzed the user benefits mainly stemming from transfer fares using the smart card data of commuters using public transportation in Gyeonggi-do. An index called the beneficiary rate of the free transfer was developed and a scenario analysis was conducted based on the various levels of the rate. The results of this analysis proved that the users of public transportation services in non-urban areas in Gyeonggi-do can only receive transfer benefits by the extended time for free transfer and not by the implementation of a uniform policy irrespective of the type of area. The study also suggested an equitable fare transfer system and policy alternatives.

• Korean Chemical Engineering Research
• /
• v.61 no.2
• /
• pp.240-246
• /
• 2023

This study was performed to convert NO_x in atmosphere by photochemical reaction utilizing the eco-friendly solar energy. The mortar specimen coated with photocatalyst was fabricated and the photochemical conversion efficiency of NO_x was analyzed. The photocatalyst coated concrete was fabricated by first adding TiO₂ photocatalyst on the bottom of mold first and next adding cement mortar and, then, curing the concrete mortar. The grease was sprayed on the bottom of mold in advance so that the concrete can be demolded easily after curing. The conversion efficiencies of NO_x by photochemical reactions were investigated systematically by changing the process variable conditions of amount of TiO₂ coating, UV-A light intensity, total gas flow rate, relative humidity and initial NO_x concentration. It was confirmed that the photocatalyst coated concrete fabricated in this study could convert NO_x successfully for various process conditions in atmosphere. In future, we believe this research result can be utilized as basic data to design the infrastructure of building, tunnel and road for controlling efficiently the air pollutants such as NO_x, SO_x, and VOCs.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1D
• /
• pp.101-110
• /
• 2009

Urban Designers and Planners are interested in creating barrier-free (BF) environments as the demand for social equity increases. BF design consists of design strategies for modifying buildings or facilities to be used by the physically disadvantaged or disabled. To construct buildings or facilities to be "Barrier-free", design standards specifically modified for the physically disadvantaged or disabled should be applied. The purpose of this study is to analyze the BF design standard used in the national laws and provide suggestions for their future improvements. In the study national laws in four countries were reviewed and important BF standards to be used in the laws were identified using a frequency analysis. The results of the frequency analysis were applied to the BF assessment criteria for sidewalk design. Then a field assessment for two sidewalks located in Seoul metropolitan region was conducted using the refined BF criteria. The findings from the field assessments indicated that current regulations were not appropriately designed to provide sufficient convenience for the disabled. It is needed to enhance the BF standards in the domestic regulations to offer sufficient mobility to the physically disadvantaged or disabled.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.4
• /
• pp.285-303
• /
• 2023

Interest in building underground spaces is increasing for the creation of downtown infrastructure and efficient space utilization. A representative method of utilizing underground space is a tunnel, and in addition to road tunnels, the construction of utility tunnels such as power conduits and utility conduits is gradually increasing. The current basic tunnel construction method can be divided into NATM (New Austrian Tunnelling Method) and TBM (Tunnel Boring Machine). The NATM is a reliable method, but it is accompanied by vibration and noise due to blasting. In the case of the TBM excavation method, there are disadvantages in terms of construction period and construction cost, but it is possible to improve economic feasibility by introducing appropriate complementary methods. In this study, a blasting method was develop using the NATM after TBM pre-excavation using the protective shield method. This is a method that compensates for the disadvantages of each tunnel construction method, and is expected to reduce construction costs, blasting vibration, and noise. In order to review the performance of the developed method, an experiment was conducted to evaluate the performance of explosion-proof tube to which a protective shield scale model was applied, and the impact of blasting vibration of the protective shield method was analyzed.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.1
• /
• pp.31-39
• /
• 2023

To reduce facility management costs and safety concerns due to aging of facilities, it is important to estimate the future facilities' condition based on facility management data and utilize predictive information for management decision making. To this end, this study proposed a methodology to estimate facility elements' condition using XGBoost. To validate the proposed methodology, this study constructed sample data for road bridges and developed a model to estimate condition grades of major elements expected in the next inspection. As a result, the developed model showed satisfactory performance in estimating the condition grades of deck, girder, and abutment/pier (average F1 score 0.869). In addition, a testbed was established that provides data management function and element condition estimation function to demonstrate the practical applicability of the proposed methodology. It was confirmed that the facility management data and predictive information in this study could help managers in making facility management decisions.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.4
• /
• pp.121-131
• /
• 2023

The Chinese three northeastern three provinces - Heilongjiang, Liaoning, and Jilin - hold significant geographical, geopolitical, and commercial importance due to their location allowing for cross-border trade and transportation with North Korea. These provinces are crucial for establishing a complex Eurasian logistics network in line with South Korea's new northern policy. The Chinese three northeastern three provinces, as this region is known, boasts excellent maritime transportation links between South Korea, China, and North Korea, making it an logistics hub for transporting goods to Eurasia and Europe through multimodal transport. This study highlights the importance of securing a logistics hub area by fostering cooperation and friendly relations with China's three northeastern three provinces, which are crucial to the success of the New Northern Policy. In particular, the study aims to analyze current status of trade with these region and freight volume transported by ships and recommend political advice for securing logistics hub and revitalizing maritime transport. As the policy suggestion, this study is to establish a logistics hub by implementing joint port operations, constructing port infrastructure jointly, and operating shipping companies together. Additionally, we propose ways to revitalize the maritime passenger transport business between Korea and China, which involves expanding cultural exchanges and developing content.