• 한국소음진동공학회논문집
• /
• 제19권10호
• /
• pp.1083-1091
• /
• 2009

Modern military equipments are tend to be mounted on a movable truck for their survivability and operation performance. Special units and electronic equipments installed on the truck experience the vibration caused by road roughness during their transport. The level of the transportation vibration is affected by both road conditions and vehicle speeds. In this paper, various experiments on the vibration characteristics of the equipment are carried out via road tests. Transportation vibration is also investigated by numerical analysis using FEM, and natural frequencies and random responses of the launcher are obtained. The PSD and RMS values of acceleration of the equipment are predicted and compared with test results.

• 한국자동차공학회논문집
• /
• 제17권2호
• /
• pp.112-117
• /
• 2009

The new suspension, called ISU(In-arm suspension system) was developed for Infantry Fighting Vehicle. During vehicle field test, early failure of ISU's sealing system was occurred after driving the paved road. From the failure analysis, ISU's displacement data was obtained. In analysis of PSD data, track induced vibration which has high frequency and small amplitude characteristics, was dominant. Such track vibration would result in early seal failure because of friction increase and lack of lubrication. To simulate track vibration environment in laboratory, seals were tested under the condition of 20Hz, ${\pm}1$, ${\pm}2mm$ amplitude. The same type of seal failure occurred in vehicle test, was reproduced in the lab test under ${\pm}1mm$ amplitude. From the test results, the durability of improved seal was increased by 2.5 times compared with the previous one.

• 대한기계학회논문집
• /
• 제11권3호
• /
• pp.437-443
• /
• 1987

본 연구에서는 승차감을 향상시키기 위해 원전석의 진동을 고려한 평면 5자 유도 모델을 사용하여 확정적 노면과 무작위 노면에 대한 시간영역, 주파수영역 해석 과 이에 따른 최적설계를 수행하였다. 최적설계시 목적함수는 주파수영역에서의 운 전석의 가속도 PSD를 구하여 여진동력(absorbed power)을 계산한 다음, 이를 최소화하 면서 차체의 안정성을 제한조건으로 하였다. 또 최적설계의 결과인 운전석의 가속도 rms값과 ISO경계값을 비교하였다. 시간영역에서는 결과를 해당된 운전석의 최대절대 가속도 및 상대변위에 대한 한계치와 비교하였다. 한편으로는 실제 노면 형상을 컴 퓨터로 시뮬레이션하고, 속도에 따른 최적치들 중에서 전체최적치 결정법을 제시하였 다.