• Asian-Australasian Journal of Animal Sciences
• /
• 제19권11호
• /
• pp.1649-1657
• /
• 2006

In order to find an alternative source of inoculum to caecal content for studying the fermentation activity of rabbit hindgut, caecal content and faeces of 25 hybrid Hyla rabbits were used as inocula for an in vitro gas production trial. About 1 g of three substrates (dehydrated alfalfa meal, dehydrated beet pulp, barley) was weighed, in quadruplicate per inoculum, in 120 ml bottles; 75 ml of anaerobic medium and 4 ml of reducing solution were added and bottles were placed at $39^{\circ}C$. Caecal content and faeces were diluted respectively 1:2 (CI) and 1:8 (FI) with anaerobic medium and were introduced in the respective bottles (10 ml). Gas production was recorded 20 times at 2-24 h intervals throughout fermentation (96 h). The fermentation characteristics (i.e. degraded organic matter, OMd; potential gas production, A; fermentation rate, Rmax; time at which it is reached, Tmax; pH, volatile fatty acid, VFA) were studied by inoculum and feedstuffs. The feedstuffs, according to their chemical composition, showed very different fermentation characteristics. In particular, OMd, A and Rmax allowed feedstuff classification as follows: barley>beet pulp>alfalfa. The inocula differ (p<0.05) in Tmax, were higher for CI (15.53 vs. 11.96 h) and in VFA production. In particular, CI produced higher levels of acetate (38.9 vs. 33.4 mM/g OM incubated, p<0.01) and isobutyrate (0.72 vs. 0.42, p<0.01) but less propionate (7.1 vs. 10.3, p<0.01) and butyrate (11.3 vs. 14.0, p<0.01). However, the trend of gas production, similar for the inocula according to the fermented substrate, and the good regression equation to estimate some caecal fermentation parameters from faeces suggest that, after standardisation, the faeces could be used as an alternative inoculum for gas tests in rabbit.

• 기술혁신연구
• /
• 제23권2호
• /
• pp.33-54
• /
• 2015

국가차원의 슈퍼컴퓨팅 성능수요 예측은 슈퍼컴퓨터를 활용하는 계산과학분야의 연구자나 연구개발 인프라를 구축 운영하고 있는 전문기관, 과학기술 인프라구축을 주도할 정부기관에 있어서 매우 중요한 정보이다. 본 연구는 그동안 진행되었던 슈퍼컴퓨터 성능관련 예측활동 분석을 통해 과학기술 역량에 영향을 미치는 요인들을 도출하고 이를 슈퍼컴퓨터 기술진보 추세에 적용한 복합 예측모형을 제안하였다. 횡단면분석에서는 슈퍼컴퓨팅 성능에 영향을 미칠 것으로 판단되는 GDP, GERD, 연구원수, SCI논문수를 고려한 다중회귀분석을 수행하였다. 그리고 횡단면분석 결과에 Top500 자료의 성능(Rmax)값을 이용한 시계열분석을 통해 도출된 기간별 기술진보율을 곱하여 슈퍼컴퓨터의 성능을 예측하였다. 제안된 예측모형을 바탕으로 세계 슈퍼컴퓨터 500위의 시계열자료를 이용하여 한국이 2016년에 보유해야 할 슈퍼컴퓨터 성능규모를 예측하였다. 횡단면분석과 기술진보율을 적용하여 2016년 한국의 슈퍼컴퓨팅 성능수요를 예측해본 결과 현재의 추세를 이용할 경우 15~30PF 정도, 목표 국가수준의 추세를 이용할 때 20~40PF 정도의 컴퓨팅 역량이 필요할 것으로 예측되었다. 이 결과는 단순 회귀분석을 적용한 결과인 9.6PF와 횡단면분석을 적용한 결과인 2.5PF와 큰 차이를 나타내었다.

• 한국산학기술학회논문지
• /
• 제17권1호
• /
• pp.597-604
• /
• 2016

본 논문에서는 항공 방제 시 균일 방제를 통하여 병해충에 의한 농산물 생산량 저하 및 농약이 과도 살포된 농작물 생산을 방지하고자 하였다. 항공 방제가 실시되는 비행 고도 3m와 속도 15km/h를 유지하는 것은 사용자의 조종 습관 및 방법, 바람의 변화 같은 환경적 요인이 작용하여 대단히 어렵다. 따라서 무인 헬리콥터로부터 비행 데이터를 전송받아 비행속도 및 고도의 변화에 따라 붐의 각도와 DC 펌프의 제어가 가능하도록 살포 장치 및 제어기를 설계 및 제작하였고 무성항공사의 무인 헬리콥터 Rmax에 탑재하여 살포 성능을 검증했다. 실험은 가로 10m, 세로 50m의 농지에서 감수지를 한 열에 1.25m 간격으로 9장씩 5열을 5m의 위치에서부터 10m 간격으로 배치하고, 방제 실험 시 제작된 항공 살포 시스템을 이용하여 살포하였다. 무인 헬리콥터는 최저속도 7.2km/h부터 최고속도 17.6km/h, 최저높이 2.32m부터 최고 3.47m까지 최고 10.4km/h의 속도 변화와 1.15m 고도 변화를 보이며 비행하였고, 각 열이 평균 46423개의 입자개수의 분포로 7.5m의 유효 살포 영역을 형성함을 보여 제안된 항공 살포시스템이 균일 방제에 효과가 있음을 증명한다.

• 대한기계학회논문집
• /
• 제11권6호
• /
• pp.935-944
• /
• 1987

본 연구에서는 금속 표면의 정밀가공법을 연구대상으로 하여 구상흑연주철시 편을 미량의 테이퍼로 연삭가공하고 NACHI 6000ZZ 볼 베어링을 로울러로 사용하여 로 울러 다듬질을 행함으로써 로울러 지름 변화에 따른 가압력이 표면조도에 미치는 영향 을 구명하는데 목적을 두었으며 아울러 로울링(rolling)회수에 따른 펴면조도, 경도 및 직경의 변화량을 실험적으로 구명하였다.

• 한국정밀공학회지
• /
• 제7권3호
• /
• pp.37-47
• /
• 1990

In accordance with the high precision of mechanical elements, it has been required to high precision in surface roughness measurement and, therefore, stylus tip radius is manufa- ctured less than 2 .mu. m through ion sputter machining. In this experiment, by suing ion sputter machined stylus pf fine tip, radius and lapping machined stylus, surface roughness of standard specimens, silicon wafer were measured and then Rmax, Ra, RMS value were investi- gatedaccording to the variation of tip radius of stylus. As a result, measuring error due to the variation of stylus tip radius in surface roughness measurement was decreased by using ion sputter machined stylus and also the measuring accuracy was improved. And the measuring variation of Ra, RMS calculated from correlation coefficient lager than 0.9 on the wave of short period and amplitude using ion sputter machined stylus of fine tip radius.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.922-925
• /
• 2002

Klystron which is micro wave amplifier tube are mainly used in fields of science such as accelerator, nuclear fusion, broadcasting, communication fields, and defense industry fields, tract. The quality of Klystron anode and cavity are determined by form accuracy and roughness of the worked surface. Therefore anode and cavity are restricted the from accuracy strictly and the surface roughness be under Rmax 0.03S. As a work material of anode and cavity, the oxygen-free copper, that is used for optical pares of aerospace and laser mirror is selected. An outside diameter of material is $\Phi$100 mm and an inside diameter is $\Phi$30~33 mm. In this study, to find the optimum ultra precision cuffing condition of oxygen-free copper with diamond turning machine, the surface roughness is examined for various diamond toot nose radius, main spindle speed, fred rate and depth of cut. As a result of experiment, we could machined the anode and cavity with a surface roughness within Ra 3.2 nm, a form accuracy within 0.01 $\mu\textrm{m}$.

• 한국정밀공학회지
• /
• 제10권1호
• /
• pp.42-51
• /
• 1993

Recently, WC-Co have some excellent properities as the material for the mechanical component such as metallic moulding parts, ball dies parts, and punch parts. This paper describes the surface roughness and grinding force caused by experimental study on the surface grinding of WC-Co with ultra-precision like a mirror shape using diamond wheel. Also, some investigations are carried out using WA grinding wheel to increase improved ground surface roughness such as polishing, lapping effect. Some important results obtained here are summarized as follow. 1) Within this experimental grinding condition, we can be obtained $R_{max}.\;2\mu\textrm{m}\;R_a\;0.3\mu\textrm{m}$ whichare the most favourable ground surface roughness using #140 diamond wheel, and improved surface roughness values about 20 .approx. 25% throughout 5 times sparkout grinding 2) The value of surface roughness is Rmax. $0.49\mu\textrm{m},\;R_a\;0.06\mu\textrm{m}$ using #600 diamond wheel. 3) The area of no rack zone is less than $F_{n}$ 0.27N/mm, Ft 0.009N/mm

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권3호
• /
• pp.48-54
• /
• 2003

This paper deals with mirror grinding of a small-sized aspherical lens by a resin bonded diamond spherical wheel. Up to now, a spherical lens has been used for the lens of the optical communication optical part. However, recently, aspherical optical parts are mainly used in order to attempt the improvement in image quality and miniaturization of the optical device. It is possible to manufacture the aspherical lens which is presently being used in optical instrument through ultra-precision machining technology. Also, to realize compactness, efforts are being made to produce a micro aspherical lens, fur which the development of a high-precision, micro molding die is inevitable. Therefore, extensive research is being done on methods of producing a micro aspherical surface by high-precision grinding. In this paper, the spherical wheel was trued by cup-shaped truer and tool path was calculated by the radius of curvature of the wheel after truing and dressing. Then in the aspherical grinding experiment, WC material which is used as a melding die for the small-sized aspherical lens was ground. The results showed that a form accuracy of 0.1918 $\mu\textrm{m}$ P-V and a surface roughness of 0.064 $\mu\textrm{m}$ Rmax could be achieved.

• Food Science and Biotechnology
• /
• 제16권4호
• /
• pp.590-593
• /
• 2007

The textural properties of doughs mixed with L-ascorbic acid (AA), trypsin hydrolyzed gluten peptide (THGP), and a mixture of AA-THGP were investigated using texture analyzer under the fermentation of the full formula and the freezing process. The full formula dough (FFD) required a shorter mixing time than the flour and water formula dough (FWD). The maximum resistance (Rmax) values of both the unfrozen and frozen doughs were lower for the FFD. The effects of AA and THGP additions were not significant (p<0.01) in FFD, however, they were significant in FWD. The freezing effect was significant (p<0.0001) for FFD, indicating that yeast fermented dough was much more sensitive to damage from freezing, which subsequently affected dough strength. Additions of AA (p=0.0026) and THGP (p=0.0097) had a significant effect on the extensibility (E-value) of unfrozen FWD, where THGP increased and AA decreased the E-value. However, freezing did not significantly effect the extensibilities of FWD (p=0.64) or FFD (p=0.21). The area of FFD was lower than the area of FWD for both the unfrozen and frozen doughs. However, the frozen dough mixed with THGP alone had the largest area overall. The addition of additives did not result in significantly different (p<0.01) areas under the curve, except in the frozen FFD. Freezing caused a statistically significant difference in the area of FWD (p=0.0045).

• 한국정밀공학회지
• /
• 제18권12호
• /
• pp.82-87
• /
• 2001

This paper deals with mirror grinding of a small-sized aspherical lens by the resin bonded diamond spherical wheel. Up to now, a spherical lens has been used for the lens of the optical communication optical part. However, recently, the aspherical optical parts are mainly used in order to attempt the improvement in image quality and miniaturization of the optical device. It is possible to manufacture the aspherical lens which is presently being used in optical instrument through ultra-precision machinery technology. Also, to realize compactability, efforts are being made to produce a micro aspherical lens, for which the development of a high-precision, micro molding die is inevitable. Therefore, extensive research is being done on methods of producing an micro aspherical surface by high-precision grinding. In this paper, the spherical wheel was trued by cup-type truer and tool path was calculated by the radius of curvature of wheel after truing and dressing. And then in the aspherical grinding experiment, WC material which is used as a molding die for the small-sized aspherical lens was ground. It results was that a form accuracy of 0.1918${\mu}m$ P-V and a surface roughness of 0.064${\mu}m$ Rmax.