• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.805-812
• /
• 2014

This study investigates the impact of morphological change on the physical habitat simulation. For this, CCHE2D model is used for the hydraulic analysis including the morphological change, and the physical habitat suitability is assessed with habitat suitability curves. The model is applied to a 2.5km long reach downstream of the Goesan Dam, from Sujeon Bridge to Daesu Weir. Flow data of discharge and stage in July, 2006 are used in the computation. The numerical model is verified by means of comparison with the measured water surface elevation data, and the variation of the river bed is not verified in this study. Adult Zacco platypus is chosen for the dominant species. Physical habitat simulations result in composite habitat suitability and weighted usable area for drought, low, normal, and averaged-wet flows. The simulation results indicate that the composite suitability index increased at reaches right downstream of the Sujeon Bridge and around the bend. This also increased weighted usable area by 5.4-11.3%.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.4
• /
• pp.821-834
• /
• 2015

This study presents the analysis of flow and bed change characteristics considering bed protection work built on the immediate downstream of weir to protect river bed from scouring. The study area is 37km reach from Hyunpoong station to Masuwon station including Hapcheon- Changryoung multi-function weir in the Nakdong river. CCHE2D model is calibrated and validated for evaluating the flow and bed change characteristics during Typhoon Kompasu in 2010. Three simulation conditions are set up: Case 1 is a natural channel without installation of weir. Case 2 involves an installation of weir in the natural channel. Case 3 involves an installation of weir with bed protection in the natural channel. Flood frequency (50, 100 and 200yr) is applied to each scenario to analyze the effects of bed protection work. While the sediment rate is increased in the downstream of fixed gate and sluice-type gate, river bed scouring rate is increased in the downstream of lift-type gate in Case 2 comparing with the results of Case 1. The river bed scouring is not occurred in the immediate downstream of weir (~30m) due to the effect of bed protection, but larger amount of sediment is occurred in the downstream of weir (60m~) which the bed protection is not installed comparing with the results Case 1. Through the results of simulation considering bed protection work, this study would be helpful to expect bed change and operate the weir as well as manage.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.3
• /
• pp.230-240
• /
• 2009

The ESCORT model is applied at Mokpo coastal zone to analyze the effect of fresh water discharge released from the gates of the Youngsan River sea-dyke. Applicability and validity of both 2-D and 3-D hydrodynamic modules could be guaranteed by simulating hydrodynamic feature with ebb dominance characteristics. Then, effects of the released discharge on the hydrodynamics are investigated. And analysis of the effects on diffusion phenomena show that 3-D model is essential for such diffusion modelling. Moreover, vertical salinity distributions near the gates are examined, and the influence range of fresh water is also estimated, which shows that dilution of fresh water is going on slowly because of poor flushing.

• Journal of Korea Water Resources Association
• /
• v.47 no.11
• /
• pp.1027-1037
• /
• 2014

Flow and bed changes due to tributary inflow variation at the confluence of the Namhan River and the Geumdang Stream were analyzed in this study using a two-dimensional numerical model. As a result of the numerical analysis, the velocity downstream of the confluence was greater than the velocity upstream of the confluence in the main channel regardless of the magnitude of tributary inflow. However, as tributary discharge increased, the channel erosion was accelerated and the dry area was produced at the tributary. Due to the bed erosion at the tributary, sediment transport was increased and the eroded sediments were deposited in the confluence area. The deposition in the confluence area changed the flow direction at the main channel to the left side and the localized flow eroded the channel bed at the left side. Therefore, it is expected that bank failure due to continuous bed degradation is possible in this area.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.785-790
• /
• 2009

섬진강 하구역에서 모래채취로 인한 지형변화와, 댐 및 취수장의 증가로 인한 유량감소로 인해 해수의 역류범위가 증가하여 참게나 재첩과 같은 경제성 어종이 감소하고, 염분으로 인한 농업용수사용 불가와 같은 염수피해가 늘어가고 있다. 따라서 본 연구에서는 2차원 수치모형인 RMA-2, 4와 3차원 수치모형인 EFDC를 각각 이용하여 밀물 시 염수가 전파되는 범위 및 염수농도를 모의하고, 동시에 2차원 모형과 3차원 모형을 비교하여 모의목적에 대한 각 모형의 장 단점을 알아보았다. 모의결과를 살펴보면 최저 수위 시 두 모형이 큰 차이를 보이는 것을 볼 수 있었으며, EFDC가 상류쪽으로 더 길게 염수침입이 일어나는 것을 볼 수 있었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.6151-6158
• /
• 2012

By the activation of environment-friendly river works, application of vegetation mats is increasing, however, evaluation techniques for hydraulic stability of vegetation mats are not presented. This study is conducted to develop the objective test method for vegetation mats. Two kind of vegetation mats are tested by the real scale experiments, and hydraulic quantities are measured and analyzed to evaluate acting shear stresses. Roughness and shear stress are evaluated by 1 D non-uniform model. After each tests, changes in mat surfaces and sub-soil are evaluated, and from these evaluation, 3 types of mat surface damages and 2 types of sub-soil damages are presented. In the study, the case in which some damages in mat surface don't cause loss of sub-soil, is presented to be in the stable condition. Appling this stable condition and acting shear stresses, permissible shear stresses of vegetation mats are evaluated, and the results show that the reinforced mat with wire netting has more permissible shear stress.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.4
• /
• pp.55-63
• /
• 2013

This study investigates the trends and uncertainty of the impacts of climate change on paddy rice production in the Geumho river basin. The Long Ashton Research Station stochastic Weather Generator (LARS-WG) was used to derive future climate data for the Geumho river basin from 15 General Circulation models (GCMs) for 3 Special Report on Emissions Scenarios (SRES) (A2, A1B and B1) included in the Intergovernmental Panel on Climate Change (IPCC) 4th assessment report. The Food and Agricultural Organization (FAO) AquaCrop, a water-driven crop model, was statistically calibrated for the 1982 to 2010 climate. The index of agreement (IoA), prediction efficiency ($R^2$), percent bias (PBIAS), root mean square error (RMSE) and a visual technique were used to evaluate the adjusted AquaCrop simulated yield values. The adjusted simulated yields showed RMSE, NSE, IoA and PBIAS of 0.40, 0.26, 0.76 and 0.59 respectively. The 5, 9 and 15 year central moving averages showed $R^2$ of 0.78, 0.90 and 0.96 respectively after adjustment. AquaCrop was run for the 2020s (2011-2030), 2050s (2046-2065) and 2090s (2080-2099). Climate change projections for Geumho river basin generally indicate a hotter and wetter future climate with maximum increase in the annual temperature of $4.5^{\circ}C$ in the 2090s A1B, as well as maximum increase in the rainfall of 45 % in the 2090s A2. The means (and ranges) of paddy rice yields are projected to increase by 21 % (17-25 %), 34 % (27-42 %) and 43 % (31-54 %) for the 2020s, 2050s and 2090s, respectively. The A1B shows the largest rice yield uncertainty in all time slices with standard deviation of 0.148, 0.189 and $0.173t{\cdot}ha^{-1}$ for the 2020s, 2050s and 2090s, respectively.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.242-242
• /
• 2022

실제 자연하천은 하천의 만곡, 사행 정도와 교각 및 암거와 같은 구조물로 인하여 발생하는 복잡한 흐름현상이 빈번하게 발생하며, 이를 반영하기 위해서는 2차원 흐름해석 모형의 적용이 필요하다. 이러한 필요성이 있음에도 현재 하천흐름해석 분야 실무에서 사용되는 모형은 1차원 모형이 주를 이루고 있으며, 그 이유는 현재 제공되고 있는 하천 단면 자료와의 높은 적용성 때문이라고 할 수 있다. 현행 제공되고 있는 하천 단면 자료는 인력 위주의 측량 자료로서 하천 연장의 일정구간 간격으로 단면 자료를 제공하고 있기 때문에 2차원 흐름해석 모형에 적용하기 위해서는 보간 작업이 필수적이며, 정확성 또한 낮아 적용성이 떨어지는 문제점이 있다. 하지만 최근 드론을 이용한 측량 기술의 발전으로 LiDAR, 초분광을 활용한 양질의 2차원 하천 하상 자료를 산출하기 시작하였으며, 하천흐름해석 분야에서 2차원 흐름해석 모형의 적용성이 높아지고 있다. 본 연구에서는 기존에 적용하기 어려웠던 사행도가 높은 하천에 대하여 드론 측량 자료를 활용한 2차원 흐름해석 모형 결과와 기존의 측량 방식을 적용한 2차원 흐름해석 모형 결과 비교를 통하여 드론 측량 자료를 활용한 2차원 흐름해석 모형의 적용성 평가를 수행하고자 한다.

• Ecology and Resilient Infrastructure
• /
• v.6 no.1
• /
• pp.58-68
• /
• 2019

This present study conducted the impact of the restoration of low-flow channel on fish habitat in a reach of the Wonju Stream, Korea. The target species were Zacco koreanus, a dominant species in the middle- and upper-stream of Wonju Stream. The River2D model was used for the computation of the flow and the habitat suitability index model was used to estimate the quantity and quality of fish habitat using habitat suitability curves. In order to restore the study area, the low-flow channel was identified through the bankfull discharge of the study reach, and the best hydraulic section was designed. In addition, various restoration techniques were applied to the low-flow channel through rocks, pool/riffle structures, and the change of the channel width. Simulation results indicated that the restoration of the best hydraulic section effects decreased habitat suitability for the target species. However, when various restoration techniques were applied, the WUA (Weighted Usable Area) was improved by about 11%.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.11a
• /
• pp.213-215
• /
• 2006

This study presents an application of GIS technologies to construct the graphic user interface for 3-dimensional exhibition of the results obtained by ocean hydrodynamic model. In coastal management studies, GIS provide a receptacle for scattered data from diverse sources and an improvement of the 3D visualization of such data. Within the frame of a GIS a variety of analytical, statistical and modeling tools can be applied to transform data and make them suitable for a given application. A 3D hydrodynamic model was driven by time-dependent external forcing such as tide, wind velocity, temperature, salinity, river discharge, and solar radiation under the open boundary condition. The Jinhae Bay was selected as a case study. Here, we have used GeoMania v2.5 GIS software and its 3D Analyst extension module to visualize hydrodynamic model result that were simulated around the Jinhae Bay.