• Journal of the Korean Institute of Gas
• /
• v.21 no.5
• /
• pp.95-103
• /
• 2017

A lot of hazardous materials have been used for product processing and utility plant. Many accidents including toxic release, fire and explosions occur in the ammonia related facility and plant. Various safety and environment management program including PSM, SMS, ORA etc. are being implemented for risk management and accident prevention in the production industry. Also much study and research have been carried about risk assessment of accident scenario in the academic and research area. In this paper, firstly risk level was assessed by using a typically used KORA program and LOPA PFD method for the selected ammonia unloading and storage facility. And then risk reduction measures for the risk assessed facility were studied in 3 aspects and some measures were proposed. Those Risk Reduction measures are including a leak detection and emergency isolation, water spray, dilution tank, dike and trench, scattering protection in hardware impovement aspect, and a applicable risk criteria, conditional modifier for existing LOPA PFD, alternative supporting modeling program in risk estimation methodology aspect, and last RBPS(Risk Based Process Safety) program, re-doing of process hazard analysis, management system compliance audit in managerial activity aspect.

• Journal of Korea Multimedia Society
• /
• v.25 no.6
• /
• pp.793-806
• /
• 2022

As the IMO introduced MASS (Maritime Autonomous Surface Ships), ISO(International Organization for Standardization) announced ISO 19847 of a maritime data sharing standard for collecting and remotely managing data of ship systems. Previous literature evaluated the risk using HAZOP for ISO 19847 and proved that risk assessment is useful through experiments. However, redundancy of ISO 19847 ship data server which is one of the risk reduction method suggested in previous literature, was designed but couldn't tested due to the limitations of the conditions. So, in this study, to prove the usefulness of the ship data server redundancy of ISO 19847 which was not tested in previous literature. It based on the design of previous literature, and the network of ship data servers was modeled using the SES/DEVS format and simulated using the DEVS# open source library.

• Transactions of the Korean hydrogen and new energy society
• /
• v.35 no.1
• /
• pp.66-74
• /
• 2024

This study addresses the escalating issue of worldwide hydrogen gas accidents, which has seen a significant increase in occurrences. To comprehensively evaluate the risks associated with hydrogen, a two approach was employed in this study. Firstly, a qualitative risk assessment was conducted using the bow-tie method. Secondly, a quantitative consequence analysis was carried out utilizing the areal locations of hazardous atmospheres (ALOHA) model. The study applied this method to two incidents, the hydrogen explosion accident occurred at the Muskingum River power plant in Ohio, USA, 2007 and the hydrogen storage tank explosion accident occurred at the K Technopark water electrolysis system in Korea, 2019. The results of the risk assessments revealed critical issues such as deterioration of gas pipe, human errors in incident response and the omission of important gas cleaning facility. By analyzing the cause of accidents and assessing risks quantitatively, the effective accident response plans are proposed and the effectiveness is evaluated by comparing the effective distance obtained by ALOHA simulation. Notably, the implementation of these measures led to a significant 54.5% reduction in the risk degree of potential explosions compared to the existing risk levels.

• Fashion & Textile Research Journal
• /
• v.12 no.1
• /
• pp.94-102
• /
• 2010

The dyeing of poly(trimethylene terephthalate)(PTT)/silk mixture fabrics can be accomplished by a two bath dyeing method with separate application of the disperse dyes on the PTT, reduction cleaning of the stained silk and then dyeing the silk with the acid dyes, or by one bath dyeing method with mixed dye ranges, possibly followed by a cleaning treatment. The two bath dyeing method has the advantage of better results with respect to dry cleaning fastness properties thanks to the possibility of an intermediate reduction clear. On the other hand, as compared with the two bath dyeing method, one bath dyeing method with a mixed dye range permits rapid and more reproducible dyeing, without the risk of great difference with respect to the shade of the strike on both substrates as well as savings of time, energy and water usage. This study was carried out to investigate dyeing characteristics of PTT/silk mixture fabrics with disperse dyes/acid dyes by one bath dyeing method in comparison with two bath dyeing method in the interests for rationalization of the dyeing process.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.1
• /
• pp.385-405
• /
• 2019

High Efficiency Video Coding (HEVC) enables significantly improved compression performance relative to existing standards. However, the advance also requires high computational complexity. To accelerate the intra prediction mode decision, a minimum risk Bayesian classification framework is introduced. The classifier selects a small number of candidate modes to be evaluated by a rate-distortion optimization process using the sum of absolute Hadamard transformed difference (SATD). Moreover, the proposed method provides a loss factor that is a good trade-off model between computational complexity and coding efficiency. Experimental results show that the proposed method achieves a 31.54% average reduction in the encoding run time with a negligible coding loss of 0.93% BD-rate relative to HEVC test model 16.6 for the Intra_Main common test condition.

• Journal of Food Hygiene and Safety
• /
• v.23 no.1
• /
• pp.80-84
• /
• 2008

Maximum level of hazardous chemicals in foods can be settled after overall investigation of toxicological database, the representative exposure assessment, risk level on the present exposure level, the need of maximum level establishment, making of maximum level scenario proposed under consumer protection and verification of contamination reduction method and review of application efficiency on maximum level for risk management. The maximum level should be needed when the risk value of specific chemical caused by food ingestion was high and chronic human exposure was predicted continuously unless the maximum level exists. The key role of the risk assessment is to improve the efficiency of the risk management to reduce the present risk level and make the risk management policy scientifically by setting the representative result of the risk assessment.

• Journal of Preventive Medicine and Public Health
• /
• v.36 no.3
• /
• pp.230-238
• /
• 2003

Objectives : To estimate the value of statistical life (VSL) and health damage cost on theoretical mortality estimates due to environmental pollution. Methods : We assessed the health risk on three environmental problems and eight sub-problems. Willingness to pay (WTP) was elucidated from a questionnaire survey with dichotomous contingent valuation method and VSL (which is the division of WTP by the change of risk reduction) calculated from WTP. Damage costs were estimated by multiplying VSL by the theoretical mortality estimates. Results : VSLs from death caused by air pollution, indoor air pollution and drinking water contamination were about 0.3, 0.5 and 0.3 billion won, respectively. Damage costs of particulate matters ($PM_{10}$) and radon were higher in the sub-problems and were above 100 billion won. Because damage cost depends on theoretical mortality estimate and WTP, its uncertainty is reduced in the estimating process. Conclusion : Health damage cost or risk benefit should be considered as one scientific criterion for decision making in environmental policy.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.21 no.2
• /
• pp.174-182
• /
• 2014

Purpose: This study was done to investigate the probability of stroke, knowledge of stroke, and health-promoting lifestyle among stroke risk groups. Method: A descriptive correlational design was used. Data for 110 patients were analyzed. The probability of stroke was calculated using the Stroke Risk Profile from the Framingham Heart Study (2013), knowledge of stroke was measured using a questionnaire developed by Yoon et al. (2001), and health-promoting lifestyle was measured using the HPLP-II, developed by Walker et al. (1995). Results: The average probability of stroke was 11.74, knowledge of stroke, 67.88, and health-promoting lifestyle, 2.27. Probability of stroke showed significant differences according to gender. Knowledge differed according to patients' salaries. Health-promoting lifestyle showed significant differences according to gender. There were no significant correlations between probability of stroke and knowledge of stroke or probability of stroke and health-promoting lifestyle, but there was a significant correlation between knowledge of stroke and health-promoting lifestyle. Conclusion: Results indicate the necessity of active education to increase knowledge related to stroke which will contribute to an increase in health-promoting behaviors and make primary prevention a reality in the reduction of risk of stroke among stroke risk groups.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.23 no.3
• /
• pp.270-276
• /
• 2001

The treatment of mandibular subcondylar fractures is a matter of controversy. The majority of mandibular subcondylar fracture are treated by closed reduction, but the displaced or dislocated mandibular subcondylar fractures may be treated by open reduction. The characteristics of open reduction are the anatomical reduction, the functional restoration, the rapid function, the maintenance of vertical ramus dimension, the better appearance and the less resultant TMJ problem etc. When an open reduction is considered, the wire, miniplate, lag screw and Kirschner wire are available with internal fixation. Of these, Kirschner wire is a simple method relatively and correct positioning of the wire achieves rigid fixation. But many open reduction methods for mandibular subcondylar fractures require extraoral approach. The extraoral approach has some problems, the facial scar and the risk of facial nerve injury. On the other hand, the intraoral approach eliminates the potency of the facial scar and the facial nerve injury, but is difficult to access the operation site. Since the intraoral approach was first described by Silverman (1925), the intraoral approach to the mandibular condyle has been developed with modifications. The purpose of this article is to describe the intraoral technique with the Kirschner wire on mandibular subcondylar fractures. Conclusion : The intraoral reduction with Kirschner wire on mandubular subcondylar fractures avoids the facial scar and facial nerve injury and is simple method to the extraoral approach. And it has minimal morbidity and better esthetics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.56-68
• /
• 2019

Safety-conscious design on site is required for site constructions because of the introduction of the design for safety, but it still leaves much to be desired. This study compared the site where the design was applied and the site where it was not applied. The applied case examined the underground wall construction during frame construction, which corresponds to the skeleton of the building construction. The underground wall construction is quite risky due to the exposure to exterior environments and involvement of various stages, such as scaffolding, formwork, reinforcing work, and concrete casting work. Therefore, the risk factors for each stage were identified and a risk assessment was carried out to select an alternative method to reduce the risk. The risk factors of the selected alternative construction method were also identified and a risk assessment was conducted. The risk assessment weight was calculated by comparing the site where the construction method was applied and the site where it was not, explaining the necessity of the design for safety in reducing the risk. In addition, an actual case where an alternative construction method was used was studied to highlight the necessity for a design for safety.