• Journal of Climate Change Research
• /
• v.8 no.2
• /
• pp.171-175
• /
• 2017

The purpose of the farmstead-specific early warning service system for weather risk management is to develop custom-made risk management recommendations for individual farms threatened by climate change and its variability. This system quantifies weather conditions into a "weather risk index" that is customized to crop and its growth stage. When the risk reaches the stage where it can cause any damage to the crops, the system is activated and the corresponding warning messages are delivered to the farmer's mobile phone. The messages are sent with proper recommendations that farmers can utilize to protect their crops against potential damage. Currently, the technology necessary to make the warning system more practical has been developed, including technology for forecasting real-time weather conditions, scaling down of weather data to the individual farm level and risk assessments of specific crops. Furthermore, the scientific know-how has already been integrated into a web-based warning system (http://new.agmet.kr). The system is provided to volunteer farmers with direct, one-on-one weather data and disaster warnings along with relevant recommendations. In 2016, an operational system was established in a rural catchment ($1,500km^2$) in the Seomjin river basin.

• Journal of Korean Society for Quality Management
• /
• v.41 no.4
• /
• pp.623-635
• /
• 2013

Purpose: The recent major recalls of hazardous products caused consumer product safety acts to be strengthen worldwide. Although the recall system of hazardous products in Korea has been operating based on Framework Act on Product Safety since 2011, the evaluation of product risk has been relied on not the results of objective incident data but the results of illegal product investigations. The purpose of this paper is to propose a product risk assessment model for Korea using injury data. Methods: The authors derived Korea's risk assessment method by analysing the advantages and disadvantages of the most widely used models in advanced countries such as EU's RAPEX RAG and Janpan's R-MAP. In this study, the level of relative frequency and severity of injury are determined based on the objective incident data and the length of hospitalization respectively. In addition, the injury data occurred during 2011 is applied to the proposed risk assessment model for case study. Results: The data analysed in this paper can be classified as high risk, medium risk, low risk, acceptable risk, and safe products through the matrix f rom the combination of the relative frequency and the severity derived. Conclusion: The proposed risk assessment model in this study has advantage obtaining reliable objective results because it uses actual injury data and redeems the drawbacks of the existing models used in advanced countries. Furthermore, because the proposed model shows the high risk products among many, it is expected to be useful especially for customs whose main job is inspecting the imported goods and the government when selecting the target product groups for safety investigation.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.577-583
• /
• 2007

In railway business plan, operations require a strategic and sustained level of planned investment to ensure assets are fit for purpose over the whole of their planned life. Therefore it is essential that operator can confidently plan and predict capital investment requirements over a number of years. This research addresses that how the London Underground apply a systematic risk based approach to their health and safety planning and investment decision making. Through this case study, we investigate the elements of management system that includes arrangements for the ongoing identification of hazards, assessment of risks and the implementation necessary control measures. Risk based business planning processes are also addressed.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.22 no.3
• /
• pp.637-644
• /
• 2012

In our current information focused society, information is regarded as a core asset and the leakage of customers' information has emerged as a critical issue, especially in financial companies. It is very likely that the technology that safeguards which is currently in commercial use is not focused at an enterprise level but is fragmented by function or by only guards portions of a customer's personal information. Therefore, It is necessary to study the systems which monitor the indicators of access at an enterprise level in order to preemptively prevent the compromise of such data. This study takes an enterprise perspective on such systems for a financial company. I will focus on examination of the methods of implementation of the monitoring system, the application of pattern analysis and examination of Security Risk Indicators (SRI). A trial of the monitoring system provided security managers and related departments with proper screening capabilities of information. Therefore, it is possible to establish a systemic counter-plans based on detectable patterns.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.6
• /
• pp.559-575
• /
• 2021

Due to the increase in ground excavation work, the possibility of ground subsidence accidents is increasing. And it is very difficult to prevent these risk fundamentally through institutional reinforcement such as the special law for underground safety management. As for the various cases of urban ground excavation practice, the ground subsidence behavior characteristics which is predicted using various information before excavation showed a considerable difference that could not be ignored compared to the results real construction data. Changes in site conditions such as seasonal differences in design and construction period, changes in construction methods depending on the site conditions and long-term construction suspension due to various reasons could be considered as the main causes. As the countermeasures, the safety management system through various construction information is introduced, but there is still no suitable system which can predict the effect of excavation and risk assessment. In this study, a web-based system was developed in order to predict the degree of impact on the ground subsidence and surrounding structures in advance before ground excavation and evaluate the risk in the design and construction of urban ground excavation projects. A system was built using time series analysis technique that can predict the current and future behavior characteristics such as ground water level and settlement based on past field construction records with field monitoring data. It was presented as a geotechnical data visualization (GDV) technology for risk reduction and disaster management based on web-based system, Using this newly developed web-based assessment system, it is possible to predict ground excavation impact prediction and risk assessment.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.22 no.3
• /
• pp.235-243
• /
• 2012

Objectives: The purpose of this study is the work environment management method through risk assessment and investigation of the work place that deals with Ammonium nitrate, based on information in and outside the country. Methods: This study suggests method of work environment management through risk assessment and investigation of the work place that deals with Ammonium nitrate, and finds out cases of Ammonium nitrate causing hazard, danger and health risk, based on literature investigation. Results: Rats exposed repeatedly to $LD_{50}$ 2,217 mg/kg(rat), $LC_{50}$ 88.8 mg/L(rat, skin) which cause high level of skin irritation, reported 1 $mg/m^3$ of NOAEL, while LOAEL was less than 100 mg/kg for the rats orally administered with the $LD_{50}$ 2,217 mg/kg(rat), $LC_{50}$ 88.8 mg/L(rat, skin), for 13 weeks. Domestically 31,640 ton/y of ammonium nitrate has been used in 22 workplace and the result of workplace assessment was 0.0171-0.9983 $mg/m^3$. ADD was 8.77-59.63 ${\mu}g/kg-day$ according to the exposure scenario. In other words the result of the risk assessment goes beyond the 'standard 1'. Conclusions: Ammonium nitrate creates a high level of irritation and toxicity when coming in breathe it or contact with skin, and is classified as category3 of GHS and specific target organ toxicant (irritating respiratory system). Exposure level at work places needs to be maintained under $1mg/m^3$, to prevent workers from being damaged.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.2
• /
• pp.124-131
• /
• 2021

In the recent business environment, risks related to product safety problems are increasing. These are arising from various factors such as increasing product and production complexity, supply chain diversification, enhanced PL (product liability) law and strengthening regulations of the government. Accordingly, ISO (international organization for standardization) published standards of PSMS (product safety management system) for suppliers such as ISO 10377 and ISO 10393. Meanwhile, the ISO 9001 QMS (quality management system) was revised in 2015, and it has established itself as an effective tool that can consistently meet the various requirements of stakeholders and promote customer satisfaction. This study aims to suggest an integration framework of QMS and PSMS based on the recent ISO international standards. To this end, firstly, the relationship between QMS and PSMS is studied based on the quality and product safety definitions, PDCA (plan-do-check-act) cycle and risk-based thinking. Secondly, the requirements of ISO 10377 and ISO 9001 are compared and classified as the common and ISO 10377 specific requirements. Finally, integration steps of two systems are suggested and guidelines that can systemize the integrated requirements are presented in the aspect of processes and documentation. This study is expected to be used as a guideline that helps companies those have already acquired QMS certification to build an international-level product safety management system early.

• Korean Journal of Health Education and Promotion
• /
• v.33 no.4
• /
• pp.89-100
• /
• 2016

Objectives: Life style modification leads to decrease health risk and change of health status for person at health risk. This study aimed to suggest essential components and effective strategies for customized health management service to provide individual and risk group in public and private health care organizations. Methods: To systematic review the essential component of health management service, I performed to collect political legislation, research papers, reports, publication and public release for heath management service from 2008 to 2016. Essential components of heath management service were service scope, service design, organizations and applied technology. Results: Service cope was composed of health risk factors, such as smoking, drinking, nutrition, physical activity and weight control. Main strategies were customized health management services, personalized behavior modification programs, evidence-based service protocol, utilization of information and communications technology (ICT), multi-dimension and multi-level approach, and public and private organizations partnership through health policies and health care system. Conclusions: To make the most of the limited resources, it should require a systematic approach that focuses on continuous monitoring and partnership of health management service.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.1
• /
• pp.55-63
• /
• 2023

In this paper, we propose a function and service of the Disaster Crisis Alert Management System that automatically analyzes the situation judgment criteria to issue a disaster crisis alert and a plan to operate in the National Disaster Management System(NDMS). In the event of a disaster, a crisis alert(interest-caution-alert-serious) is issued according to the crisis alert level. In order to automatically analyze and determine the crisis alert level, first, data collection, crisis alert level analysis, crisis alert level judgment, and disaster crisis alert management system that expresses the crisis alert level by spatial scale(province, city, district) were implemented. The crisis alert level was analyzed and expressed in two ways by applying the intelligent crisis alert level(determination of regional sensitivity, risk level, and crisis alert level) and the crisis alert standard of the crisis management manual(province-level standard setting). Second, standard metadata, linkage of situation information of target) and API standards for data provision are presented to jointly utilize data linkage and crisis alert data of the disaster and safety data sharing platform so that it can be operated within the NDMS.

• Journal of the Korean Society of Safety
• /
• v.35 no.3
• /
• pp.16-23
• /
• 2020

The use of construction machinery has been increasing every year due to the large scale, high-rise and lack of workers in construction work. On the other hand, deaths are on the rise every year due to inadequate risk management for construction machinery work. In addition, the number of deaths caused by the lack of signals or insufficient signals during construction machinery work is increasing rapidly, and it is deemed necessary to analyze the actual conditions and take countermeasures. Therefore this study has developed the Strength Risk Index (SRI) based on the Frequency Risk Index (FRI) and the 5W1H by analyzing in-depth deaths caused by construction machinery over the past five years. The risk index (RI) was assessed using the frequency and strength risk index derived to determine whether it is acceptable (acceptable risk < 0.25 ≦ unacceptable risk) and the risk assessment method for reducing risk was proposed by applying 3E (Engineering, Education, Enforcement) measures for each level of risk for unacceptable risk. It also proposed measures to improve the system, such as requirements for signal numbers, mandatory placement standards, and mandatory installation of side and rear monitoring cameras, as measures for accidents caused by failure to deploy signals or insufficient signals, which account for the highest proportion of deaths among construction machinery operators and workers.