• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.1
• /
• pp.47-53
• /
• 2006

In this paper, a simple scheme compensating for the effect of dc-link ripple voltages on output voltage of two-leg and three-phase PWM inverters is proposed, where single-phase half-bridge PWM convertor and two-leg inverter are used. The voltage at neutral point of the dc-link is controlled so that the upper-half of do-link voltage is equal to the lower-half voltage in average concept. However, the effect of the do-link ripple voltage results in the inverter output voltage and current distortion. This effect can be eliminated by introducing a compensation voltage in switching time calculation. Also, the inverter dead time should be compensated for sinusoidal output waveform. The proposed scheme has been verified by experimental results which were obtained from the V/F constant operation of the induction motor fed by two-leg inverter.

• Journal of Power Electronics
• /
• v.14 no.2
• /
• pp.351-361
• /
• 2014

The discrete torque generation mechanism and inherently nonlinear magnetic characterization of switched reluctance motors lead to unacceptable torque ripples and limit the application of these motors. In this study, a phase current profiling technique and torque sharing function are proposed in consideration of magnetic saturation effects and by minimizing power loss in the commutation area between the adjacent phases. Constant torque trajectories are considered in incoming and outgoing phase current planes based on nonlinear T-i-theta curves obtained from experimental measurements. Optimum points on constant torque trajectories are selected by improving drive efficiency and minimizing copper loss in each rotor position. A novel analytic invertible function is introduced to express phase torque based on rotor position and its corresponding phase current. The optimization problem is solved by the proposed torque function, and optimum torque sharing functions are derived. A modification method is also introduced to enhance the torque ripple-free region based on simple logic rules. Compared with conventional torque sharing functions, the resultant reference current from the proposed method has less peak and effective values and exhibits lower copper loss. Experimental and simulation results from a four-phase 4 KW 8/6 SRM validate the effectiveness of the proposed method.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.3
• /
• pp.201-208
• /
• 2015

The effects of dead-time and offset error, which cause output current distortion in single-phase grid-connected inverters are investigated this paper. Offset error is typically generated by measuring phase current, including the voltage unbalance of analog devices and non-ideal characteristics in current measurement paths. Dead-time inevitably occurs during generation of the gate signal for controlling power semiconductor switches. Hence, the performance of the grid-connected inverter is significantly degraded because of the current ripples. The current and voltage, including ripple components on the synchronous reference frame and stationary reference frame, are analyzed in detail. An algorithm, which has the proportional resonant controller, is also proposed to reduce current ripple components in the synchronous PI current regulator. As a result, computational complexity of the proposed algorithm is greatly simplified, and the magnitude of the current ripples is significantly decreased. The simulation and experimental results are presented to verify the usefulness of the proposed current ripple reduction algorithm.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.12
• /
• pp.608-616
• /
• 2006

Recently, a switched reluctance motor is widely used in various industries because it has many advantages such as a simple structure, robustness, less maintenance, high torque/weight ratio, and easy speed control over other types of motors. However, a switched reluctance motor inherently produces acoustic noise and vibration caused by torque ripple. Applications of these motors where silent operation is desirable have thus been limited. In this paper, a new stator pole face having a non-uniform air-gap and a pole shoe attached to the lateral face of the rotor pole are suggested in order to minimize torque ripple. The effects of each design parameter are validated using a time-stepping finite element method. The parameters are optimized by utilizing response surface method (RSM) combined with (1+1) evolution strategy. The result shows that the optimized shape gives higher average torque and drastically reduced torque ripple.

• The Journal of Natural Sciences
• /
• v.10 no.1
• /
• pp.63-71
• /
• 1998

This research was conducted to control flowering of azalea (Rhododendron spp.) by shading, chilling and gibberellin treatments. Higher shading among treatments resulted in extended duration of flowering (DF) and increased number of flowers (NF) in all varieties tested. Number of days to flower (NDF) was increased in 'Ripple' by shading treatment, but this was not affected in other was vice verse in 'Reinhold Ambrosia' resulting in decreased NDF. Chilling treatment followed by high shading increased NDF and shortened DF in 'Inga' and 'Ripple', but that extended NDF and DF and increased NF in 'Reinhold Ambrosia'. In flowering response to $GA_3$ resulted in decreased NDF and increased NF. These results indicated that treatments of shading, chilling and gibberellin to azalea extended DF and increased NF, but NDF appeared different according to varieties.

• Journal of Internet Computing and Services
• /
• v.21 no.3
• /
• pp.71-81
• /
• 2020

The digital bio-healthcare industry is one of the three major fostering industries of the Korean Moon Jae-In government. The purpose of this study is to compare and analyze the ripple effect and investment effect in digital bio-healthcare industry. Analyzing the ripple effects of the digital bio-healthcare industry is very important to induce policies on industry and technology development. First, the research methods were reclassified into 33 industries in the standard industry classification and rewritten into 35 industry classification tables. Second, various trigger coefficients and ripple effects coefficients were rewritten by the analysis framework of the industrial association table. Third, we compared the ripple effects of related industries in the production, investment, value-added and jobs sectors of the digital bio-healthcare industry. Finally, in terms of investment effects, the effects of in-house and related industries were compared. The result of this study would be helpful in the establishment of industrial policy and technology development policy.

• Journal of Korean Society of Transportation
• /
• v.28 no.1
• /
• pp.107-114
• /
• 2010

This study aims to identify the impact of the logistics industry on the Korean national economy. To do this, we used a MRIO table provided by the Bank of Korea which includes inter and intra regional relationship of the production and consumption for 6 areas - the Seoul Metropolitan, Gangwon, Chungcheong, Jeonra, Gyeongbuk, Gyeongnam area, but an original MRIO table was recomposed of 29 sectors focused on logistics industry for the purpose of this study. we analyzed producing-inducing effects, supply-shortage effects and inter-industry linkage effects based on logistics industry by region and industry. As a result, the logistics industry has more supply-shortage effect rather than production-inducing effect and has a higher ripple effect on the automotive in Gyeongnam area and petrochemical industry in Jeonra area. In particular, the ripple effect of th Metropolitan logistic industry was far smaller than that of other areas, because the Seoul Metropolitan industry was identified as the primary and middle demand industry.

• Proceedings of the KIPE Conference
• /
• 1996.06a
• /
• pp.26-30
• /
• 1996

This paper proposes a novel method to reduce the torque ripple due to the non-ideality of the current sensing parts in vector-controlled inverter-fed PMSM(Permanent Magnet Synchronous Motor) drive systems. The motor output torque equations are derived in terms of their offset voltages and different voltage transducing gains. And the effects of phase current errors on motor torque are analyzed for both salient PMSM and non-salient PMSM. The proposed method can eliminate the torque ripple by nulling the offset voltages and setting the voltage transducing gains to the same value. To verify the proposed method, digital simulations are carried out for non-salient PMSM.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.572-574
• /
• 2005

In this paper, a compensation scheme for the effect of dc-link ripple voltages on output voltage of two-leg and three-phase PWM inverters is proposed, without which compensation scheme the three-phase output voltage and current are much distorted. The proposed scheme has been verified by experimental results.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.5 no.4
• /
• pp.271-278
• /
• 1993

Sand ripple. the smallest bottom configuration, is one of the most important factors in the mechanism of sand transport. This paper deals with characteristics of ripple geometry generated by regular and irregular waves. Especially. rearrangement of ripple spacing caused by increasing or decreasing waves is investigated through movable bed experiments. Nondimensional length of rearranged ripples becomes very close to that of measured ripples in the field Furthermore, stochastic characteristics and occurrence limits of three dimensional ripples are investigated through the wave number spectrum calculated from the measured bottom topography.