• 제목/요약/키워드: Ripple Pressure

검색결과 62건 처리시간 0.031초

유압식 동력 조향장치의 소음에 대한 실험적 연구 (Experimental Study on the Hydraulic Power Steering System Noise)

  • 이병림;최영민;유충준
    • 한국자동차공학회논문집
    • /
    • 제17권2호
    • /
    • pp.165-170
    • /
    • 2009
  • Pressure ripple, vibration and noise level are measured in each parts of the power steering system. MD(Mahalanobis Distance) is calculated by using MTS(Mahalanobis Taguchi System) with measured data, and noise sensitive components are selected. The components applied detail design parameters are made and data is measured. After that MD is calculated also. Mean value and SN ratio can be obtained from the MD. Effective noise reduction technique and dominant design parameters in hydraulic power steering system are introduced.

유압 감쇄기의 상태공간 모델에 대한 연구 (An Investigation into the State-Space Model for a Hydraulic Attenuator)

  • 이재천
    • 한국정밀공학회지
    • /
    • 제19권5호
    • /
    • pp.168-175
    • /
    • 2002
  • The hydraulic acoustic attenuator fur an automotive active suspension system is so highly nonlinear and of high order that the analysis in time-domain has been performed quite little. In this paper, a state-space representation of the dynamics for a hydraulic attenuator was presented utilizing the electrical analogy. And the results of experiment were compared with those of simulation to validate the state-space model proposed. The comparison revealed that the state-space model proposed is practically applicable to estimate the dynamic responses of the hydraulic attenuator in time-domain.

7kW 연료전지용 DC/DC 컨버터 설계 (DC/DC Converter Design for 7kW Fuel Cell)

  • 김가인;신민호;이정효
    • 전력전자학회논문지
    • /
    • 제27권2호
    • /
    • pp.150-156
    • /
    • 2022
  • This study proposes a design method of fuel cell DC/DC converter using in 5-ton forklift. For efficient hydrogen usage, targeted fuel cell system recirculates discarded hydrogen after fuel cell reaction. Recirculating hydrogen contains much impurities that reduces output power, increasing pressure that can damage the internal fuel cell reaction system. The proposed DC/DC converter effectively converts fuel cell power considering the voltage drop rate to reflect the recirculating hydrogen. Then, frequency control method is used to regulate the current ripple amount for battery and fuel cell hybrid configuration. Proposed power converter system design and control methods are verified in a practical fuel cell system that implements recirculating hydrogen.

사판식 피스톤 펌프의 밸브 플레이트 설계와 예압에 따른 맥동 (Pulsation According to Pre-Compression Sections and Valve Plate Design for a Swash Plate Type Piston Pump)

  • 사진웅;정원지;배준형;이정민
    • 한국생산제조학회지
    • /
    • 제25권1호
    • /
    • pp.89-95
    • /
    • 2016
  • This study investigated the design factors of the opening area in order to consider the kinematic stability of a valve plate, conducting an analysis of the reduction effects of pressure pulsation and flow ripple depending on the design factors, using the $SimulationX^{(R)}$ (Germany) hydraulic analysis program. Further, we performed a structure analysis to confirm the kinematic stability of the valve plate in a swash plate type piston pump, and analyzed the effects of pulsation on a 1-step V-type notch, 2-step V-type notch, and 2-step U-type notch to determine the effects of pulsation reduction. Finally, we show the effectiveness of our proposed design of the pre-compression sections on a valve plate in terms of low pulsation by using the hydraulic analysis program, $SimulationX^{(R)}$.

A Case Study of Sediment Transport on the Seabed due to Wave and Current Velocities

  • Choi, Byoung-Yeol;Lee, Sang-Gil;Kim, Jin-Kwang;Oh, Jin-Soo
    • Journal of Advanced Research in Ocean Engineering
    • /
    • 제2권3호
    • /
    • pp.99-111
    • /
    • 2016
  • Seabed affected by scouring, sedimentation, and siltation occurrences often cause exposure, which induces risks to existing structures or crude oil or gas pipeline buried subsea. In order to prevent possible risks, more economical structure installation methodology is proposed in this study by predicting and managing the risk. Also, the seabed does not only consist of sandy material, but clayey soil is also widespread, and the effect of undrained shear strength should be considered, and by cyclic environmental load, pore water pressure will occur in the seabed, which reduces shear strength and allows particles to move easily. Based on previous research regarding sedimentation or erosion, the average value of external environmental loads should be applied; for scouring, a 100-year period of environmental conditions should be applied. Also, sedimentation and erosion are mainly categorized by the bed load and suspended load; also, they are calculated as the sum of bed load and suspended load, which can be obtained from the movement of particles caused by sedimentation or erosion.

미국의 통상압력에 따른 국내 자동차산업 파급효과: 보호무역주의 확대를 중심으로 (Impact of U.S. Trade Pressure on Korean Domestic Automobile Industry: Centering on Trade Protectionism Expansion)

  • 최남석
    • 무역학회지
    • /
    • 제43권5호
    • /
    • pp.25-45
    • /
    • 2018
  • 본 논문은 미국의 통상압력에 따른 국내 자동차산업의 수출손실 및 경제적 파급효과를 추정한다. 2010년~2017년 사이 HS 6단위 관세 및 수출자료를 이용하여 미국의 관세변화에 따른 대미 자동차수출 탄력성을 포아송 가성 최우추정기법을 적용하여 추정한다. 세 가지 통상압력 시나리오별로 대미 수출손실을 추정한 후 산업연관분석에 기반한 관세누적모형을 적용하여 국내 생산, 부가가치 및 고용에 미치는 영향을 추정한다. 분석결과 미국의 글로벌 관세율 25% 부과시 국내 경제 파급효과는 2019년~2023년 사이 5년간 수출손실 최대 308억 달러, 일자리손실 약 30만개, 생산유발손실 88.0조원, 부가가치유발손실 24.0조원으로 추정되었다. 자동차관세의 양허철회시 수출손실은 42.7억 달러, 일자리 손실은 4만 1천 7백여 명으로 추정되었다. 자동차부품에 대해 세이프가드 15% 관세율 적용시 3년간 대미 수출손실은 19.3억 달러, 일자리 손실은 1만 8천 7백여 명에 이를 것으로 추정되었다.

파랑존재시 해저 모래결위의 부유사 농도분포 (Suspended Sediment Concentrations over Ripples for Waves)

  • 김효섭;김태형
    • 한국수자원학회논문집
    • /
    • 제33권2호
    • /
    • pp.181-193
    • /
    • 2000
  • 본 논문에서는 파랑이 존재할 때 모래결위에서의 흐름과 부유사의 거동에 관하여 기술한다. 새로운 수치모형시스템을 구축하였으며 이를 규칙파랑을 이용한 기존 실험실 실험조건과 가상적불규칙파랑조건에 적용하였다. 흐름장 계산은 SMAC 방법에 근거한 프로그램 SOLA를 Kim 등(1994)이 일부 수정하여 제시한 프로그램을 사용하였다. 흐름계산 부모형은 x-z 면에서의 연속방정식과 Reynolds의 운동방정식을 기본방정식으로 한다. 흐름부모형으로 파랑궤적도, 전단응력, 압력의 분포를 계산하였다. 모형실험결과 중 수직방향궤적도는 관측자료와 잘 일치하였다. 퇴적물이동 부모형은 부유사의 이류확산을 나타내는 식을 기본방정식으로 한다. 수치기법은 분리기법을 이용하며, 모래결 표면으로부터 퇴적물이 연행되어 유체내로 투입된다. 규칙파랑 실험조건에 수치모형을 적용한 결과, 부유사농도의 연직분포가 Deltaflume의 실험자료와 유사하게 재현되었다. 가상적인 불규칙 파랑조건에 모형을 적용한 결과 부유사농도의 높게, 부유사확산 범위가 더 넓게 예측되었다.

  • PDF

크롬질화처리한 저탄소강의 고분자 전해질 연료전지 분리판으로서의 표면특성 (Surface Properties of Chromium Nitrided Carbon Steel as Separator for PEMFC)

  • 최창용;강남현;남대근
    • 한국표면공학회지
    • /
    • 제44권5호
    • /
    • pp.173-178
    • /
    • 2011
  • Separator of stack in polymer electrolyte membrane fuel cell (PEMFC) is high cost and heavy. If we make it low cost and lighter, it will have a great ripple. In this study, low carbon steel is used as base metal of separator because the cost of low carbon steel is very cheaper commercial metal material than stainless steels, which is widely used as separator. Low carbon steel has not a good corrosion resistance. In order to improve the corrosion resistance and electrolytic conductivity, low carbon steel needs to be surface treated. We made Chromium electroplated layer of $5{\mu}m$, $10{\mu}m$ thickness on the surface of low carbon steel and it was nitrided for 2 hours at $1000^{\circ}C$ in a furnace with 100 torr nitrogen gas pressure. Cross-sectional and surface microstructures of surface treated low carbon steel are investigated using SEM. And crystal structures are investigated by XRD. Interfacial contact resistance and corrosion tests were considered to simulate the internal operating conditions of PEMFC stack. The corrosion test was performed in 0.1 N $H_2SO_4$ + 2 ppm $F^-$ solution at $80^{\circ}C$. Throughout this research, we try to know that low carbon steel can be replaced stainless steel in separator of PEMFC.

지능형 지하시설물관리를 위한 상수도 모니터링 기술개발의 우선순위 평가에 관한 연구 (A Study on the Priority Order Evaluation of the Water Supply Monitoring Technology Development for the Intelligent Underground Facility Management)

  • 김정훈;이미숙;한재일
    • Spatial Information Research
    • /
    • 제16권2호
    • /
    • pp.263-278
    • /
    • 2008
  • 최근 지방자치단체들은 u-City 사업구상을 통해 지능형 지하시설물 관리를 계획하고 있지만, 지하시설물의 지능화를 위해서는 막대한 재원이 소요되므로 단계적 접근이 필요하다. 따라서 본 연구의 목표는 센싱기술 개발의 우선순위가 높은 상수도 모니터링 항목을 도출하여 기술적 실현가능성과 경제적 파급효과가 높은 킬러어플리케이션을 발굴하는데 있다. 이를 위해 상수도 업무분석, 심층면담조사, 지자체 설문조사, 전문가의견조사 등을 통해 최종 모니터링 항목을 도출하였다. 분석 결과 유량계 유량, 상수관로 누수 균열, 상수관로 압력, 정수장 유량에 대한 모니터링 기술개발의 우선순위가 높게 나타났다. 이러한 연구결과는 상수도 시설물 관리의 실제적인 수요와 우선순위를 도출하고 평가하였다는데 의의가 있으며, 향후 지하시설물 지능화 관련 기술개발의 방향성 제시에 기여할 것이라 기대된다.

  • PDF

항공기용 유압 펌프의 맥동 압력에 의한 감쇄기 용접부위 균열 개선 연구 (The Vibration Effect by Induced Pulsation Pressure to the Fatigue Crack of the Dampener Fitting Welding Zone)

  • 신재혁;김태환;강구헌;하도준
    • 한국산학기술학회논문지
    • /
    • 제18권7호
    • /
    • pp.677-687
    • /
    • 2017
  • 항공기는 운용 중에 엔진, 유압펌프, 공력 등에 의한 진동 환경에 노출이 되어 기계구조와 각종 구성품이 고주기 피로로 인해 균열이나 파괴가 될 수 있다. 통상적으로 항공기용 유압 펌프는 액셜 피스톤 타입이 주로 적용되고 있으며, 펌프의 특성상 연속적인 회전에 의한 유량 맥동 발생은 필연적으로 수반된다. 이러한 유압펌프 맥동에 의한 진동을 감소시키기 위해 설치된 Dampener Fitting의 용접 부위에서 균열이 발생하였다. 용접 부위 균열의 원인 파악을 위해 파단면 분석 및 성분분석을 수행하였고, 균열 방지를 위한 설계 개선사항으로 일체형 Fitting 가공 방식을 적용하였다. 일체형 Fitting의 적용 타당성에 대한 설계검증을 위해 구조건전성 응력 해석, 피로수명 해석, 인증시험 및 항공기 체계 장착 시험을 수행하였다. 개선방안에 대한 해석 결과 재료의 요구수명 및 각종 시험의 요구조건에 만족하는 결과를 얻었으며, 개선방안을 운영 항공기에 적용 할 수 있는 것을 객관적으로 검증하였다.