• 전기전자학회논문지
• /
• 제27권4호
• /
• pp.477-485
• /
• 2023

본 논문에서는 AC 리플이 리튬 이온 배터리의 수명에 미치는 영향을 실험적으로 분석한다. 에너지 저장 시스템(ESS)의 이용 효율을 높이기 위해 양방향 전력변환시스템(PCS)이 사용되며, 계통 연계 시 구조상 계통 주파수의 2배의 주파수를 갖는 전류 리플이 배터리에 인가되게 된다. 따라서, AC 리플이 Li-ion 배터리의 노화에 미치는 영향에 대해 분석하기 위해 DC 및 DC+AC 리플 사양의 충/방전 프로파일을 적용하여 노화 실험이 수행되었다. 실험 결과를 바탕으로 직류 내부 저항(DCIR), 증분 용량(IC), 표면 온도를 분석하였다. 결과적으로 AC 리플이 노화에 직접적으로 영향을 미치지 않으며 특정 주기 이 후 배터리 노화가 둔화되는 것을 확인하였다. 이러한 결과는 AC 리플이 발생하는 어플리케이션에서 전류 리플을 줄이기 위해 적용된 필터를 개선하는 데 도움이 될 수 있다.

• 수산경영론집
• /
• 제50권3호
• /
• pp.73-86
• /
• 2019

The purpose of this study is to provide logical and policy justification for the feasibility and sustainability of the project through analysis of economic ripple effects of the fishing village new deal 300 project. To do this, we applied the industry-related analysis, which is mainly used to analyze the economic ripple effects, to the fishing village new deal 300 project. The industry association analysis classifies the detailed project of the preliminary plan for the selection of the business into the software business such as the hardware business and the capacity enhancement in the construction field and analyzes the economic ripple effect through the inter-industry association. As a result, it is expected that the fishing village new deal 300 project will have a positive economic impact. When the total investment of 3 trillion won is invested in the project, it is estimated that the production inducement effect and the value added effect are 5,545.3 billion won and 2,102.7 billion won, respectively. In addition, 62,005 get job inducements, where 10,952 employment inducements were associated with job creation. The analysis of the above impacts seems to have secured the logical justification for the implementation of the fishing village new deal 300 project.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.267-272
• /
• 1995

The paper describes an approach for measuring flow ripple generated by oil hydraulic axial piston pumps. Flow ripple has periodic waveforms due to the cyclic nature of a pump's operation, and interacts with the connected hydraulic systems such as pipes and components to produce a pressure ripple, also known as fluid-borne noise. It is indispensable to measure a flow ripple because increasing of vibration and noise caused by a flow ripple has become a point to be considered and has need of solving these problems. The measurement of flow ripple with high frequencies from oil hydraulic axial piston pumps is msde by using the remote instantaneous flow rate measurement method. As a result, the reverse flow through the relief groove in valve plate has an important effect upon a flow ripple generated by a pumps.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권1호
• /
• pp.47-53
• /
• 2006

In this paper, a simple scheme compensating for the effect of dc-link ripple voltages on output voltage of two-leg and three-phase PWM inverters is proposed, where single-phase half-bridge PWM convertor and two-leg inverter are used. The voltage at neutral point of the dc-link is controlled so that the upper-half of do-link voltage is equal to the lower-half voltage in average concept. However, the effect of the do-link ripple voltage results in the inverter output voltage and current distortion. This effect can be eliminated by introducing a compensation voltage in switching time calculation. Also, the inverter dead time should be compensated for sinusoidal output waveform. The proposed scheme has been verified by experimental results which were obtained from the V/F constant operation of the induction motor fed by two-leg inverter.

• Journal of Information Science Theory and Practice
• /
• 제10권spc호
• /
• pp.66-75
• /
• 2022

The manufacturing industry is the foundation that drives economic growth, and manufacturing innovation is essential for sustainable growth advantage and the transition into a digital economy. Therefore, major countries actively support the field of simulations, which incorporate information and communication technologies into manufacturing, and announce various policies at the national level along with increasing investment. Simulation technology virtualizes product development processes to replace physical production and experimentation of products, dramatically reducing time and costs. In South Korea, the Korea Institute of Science and Technology Information (KISTI) has supported manufacturing companies for about 14 years by providing relevant technologies. This study uses the input-output table for the Bank of Korea to analyze the economic ripple effect. First, we identified the domestic industrial sector dealing with the supercomputing-based simulation industry. Then we analyzed its ripple effects by dividing them into the production inducement effect, value-added inducement effect, employment inducement effect, and forward/backward linkage effect. Consequently, when the supercomputing simulation budget of KISTI (28.3 billion won, 2007-2020) was set as an input coefficient, the analysis showed 45.1 billion won as the production inducement effect, 24.7 billion won as the value-added inducement effect, and 282 individuals per 1 billion won as the employment inducement effect. This study is significant in that it derived the effects of the inputs by analyzing the economic ripple effects of the projects of KISTI, which have been supporting South Korean manufacturing companies for the past 14 years with supercomputing-based simulations.

• Journal of Power Electronics
• /
• 제10권3호
• /
• pp.328-333
• /
• 2010

A photovoltaic power conditioning system (PV PCS) that contains single-phase dc/ac inverters tends to draw an ac ripple current at twice the output frequency. Such a ripple current perturbs the operating points of solar cells continuously and it may reduce the efficiency of the current based maximum power point tracking technique (CMPPT). In this paper, the ripple current generation in a dc link and boost inductor is analyzed using the ac equivalent circuit of a dc/dc boost converter. A new feed-forward ripple current compensation method to incorporate a current control loop into a dc/dc converter for ripple reduction is proposed. The proposed feed-forward compensation method is verified by simulation and experimental results. These results show a 41.8 % reduction in the peak-to peak ac ripple. In addition, the dc/ac inverter control system uses an automatic voltage regulation (AVR) function to mitigate the ac ripple voltage effect in the dc link. A 3kW PV PCS prototype has been built and its experimental results are given to verify the effectiveness of the proposed method.

• 한국해안·해양공학회논문집
• /
• 제31권4호
• /
• pp.209-220
• /
• 2019

해빈 안정화를 위해 거치되는 강성 구조물의 규모는 해빈의 자기 치유 능력이 구현되는 해빈 대순환 과정이 훼손되지 않는 범위에서 결정되어야 하나 최근 지나치게 대형화 되어 광폭 잠제도 빈번하게 차용되고 있는 실정이다. 이러한 시각에 기초하면 Irie et al.(1994)가 제안한 왜도 된 연흔모양 매트는 규모가 크지 않다는 점에서 현재 선호되는 광폭잠제의 대안이 될 수 있을 것으로 판단된다. 전술한 왜도 된 연흔모양 매트의 해빈 안정화 효과는 매트의 유수 단면 축소부에서 강제되는 와류가 run-down 시 외해방향으로 이송되는 표사를 얼마나 효과적으로 포획할 수 있느냐에 따라 결정되는 것으로 추정된다. 본 논문에서는 이러한 가설을 확인하기 위해 수치모의를 수행하였다. 수치모형은 Navier-Stokes 식과 물리기반 지형모형으로 구성하였으며, 모의 결과 왜도 된 연흔모양 매트 정점부에서 강제된 와류에 의해 포획된 표사가 해안 방향으로 이송되는 등 왜도 된 연흔모양 매트의 해빈 안정화 효과를 구성하는 주요 기작과 해빈 안정화 효과를 확인할 수 있었다.

• 통상정보연구
• /
• 제12권1호
• /
• pp.225-250
• /
• 2010

The purpose of this study is to grasp the ripple effect of food industry, which is rising as the prominent industry of the future and has a high forward & backward ripple effect, on domestic economy and other industries through Industrial Input-Output Analysis and suggest the export connection method for the development of food industry in the future. As an analysis result, it was found that the effect on product inducement and employment inducement was very high. Like that, it is necessary to establish export connection strategy to escape from narrow domestic market and advance into world market in order to develop food industry, which has a high ripple effect on domestic market. For the export connection of food industry, it is possible to enlarge overseas market demand of domestic food industry by providing domestic food companies with export-concerned information such as overseas export market information and food market information, advertising world market for domestic food industry actively through the globalization of Korea food, securing food processing technology, removing export unavailability risk through the export insurance policy and advertizing the safety of food industry through the reinforcement of food safety control standard and penalty standard.

• 한국자동차공학회논문집
• /
• 제11권3호
• /
• pp.106-114
• /
• 2003

The pressure ripple in the delivery port is caused by flow ripple, which is induced by variation of pumping chamber volume. The other reason is the reverse flow from the outlet volume produced by pressure difference between pumping chamber and outlet volume, when the pumping chamber is connected with the outlet volume. In this study, a mathematical model is presented for analyzing discharge pressure ripple, which includes vane detachment, cam ring movement , and fluid inertia effects in V-groove in the side plate. From the analysis and experiment, it was found that V-groove on the side plate, coefficient of spring supporting the cam ring, and average discharge pressure are the main factors of discharge pressure ripple in variable displacement vane pump. The theoretical results, provided in this study, were well agreed with experimental results. The analytical model to estimate the magnitude of pressure ripple in this study is expected to be used f3r the optimal design of the variable displacement vane pump.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.136-142
• /
• 2014

A major problem in Switched Reluctance Motor (SRM) is torque ripple, which causes undesirable acoustic noise and vibration. This work focuses on reducing the undesirable torque ripple in SRM by modifying stator and rotor geometry. This paper presents a comparative study on torque ripple minimization in SRM with modified pole shapes such as stator pole taper, stator pole face with non-uniform air gap and pole shoe attached to rotor pole. Further this paper presents a detailed sensitivity analysis of the effect of different geometrical parameters that alter the pole face shapes on the performance of SRM. The analysis is performed using finite-element method considering average torque and torque ripple as performance parameters. Based on the analysis, a design combining stator pole taper with non-uniform air gap is proposed to improve the torque characteristics of SRM. The dynamic characteristics of the proposed design are simulated and the results show satisfactory reduction in torque ripple.