• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.7
• /
• pp.323-328
• /
• 2005

This paper is proposed maximum thrust design of slotted permanent magnet linear synchronous motor(PMLSM) using surface harmonic method(SHM) considering slot effect. The genetic a1gorithm is used for optimization. The functional are selected the maximum thrust and the minimum detent force. This time. design parameters are set as permanent magnet(PM) width. PM height and slot width. Thrust is increased from 272[N] to 295[N] and detent force is decreased from 5[N] to 2.43[N] greatly in optimum design. Therefore, thrust ripple isn't generating almost. Also, the results of 2D EMC considering slot-effect are compared with ones of experimental and finite element analysis..

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.66 no.2
• /
• pp.53-57
• /
• 2017

This papers propose a Hall-effect sensors position error compensation method in a sunroof system using a BLDC motor with a low-cost MCU. If the BLDC motor is controlled with this wrong position, the torque ripple and operating current can be increased and the average torque also decreases. Generally, sunroof system has characteristics that operate at constant load for several seconds. It is possible to find the minimum operating current value while changing the position of the Hall-effect sensor during the sunroof operation by using these characteristics. Therefore, propose a method to change the Hall-effect sensor position and find the minimum current value. The validity of the proposed algorithm is verified through experiments.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.5
• /
• pp.634-639
• /
• 2011

This paper presents a study on the design parameters that consider the magnetic saturation effect in a rotor core of a synchronous reluctance motor. Two important design parameters in a rotor are selected to analyze the saturation effect of a synchronous reluctance motor, particularly in a rotor core. The thickness of the main segment, which is the main path of the d-axis flux, and the end rip, which affects the q-axis flux, are analyzed using the d-axis and q-axis inductances. Moreover, the characteristics of torque and torque ripple when magnetic saturation takes place are analyzed. The saturation effect is verified by comparing the reluctance torque between the experiment and FEM simulation.

• Proceedings of the Korea Contents Association Conference
• /
• 2005.05a
• /
• pp.300-303
• /
• 2005

In this study, we have studied the current status and possibilities of Busan Port, in view point of adoption of RFID technology. We have also studied middle ware under development and studied the expected ripple effect of RFID on Busan City.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.139-141
• /
• 2008

In this paper, the authors study the boost converter as a DC-DC converter like a Power supply and describe the investigation result about the two phase with interleaved boost converter which has the same effect that the switching frequency of the solid-state-switch is two times. As a result, the ripple of the input current and output current is better improved.

• Journal of Distribution Science
• /
• v.15 no.7
• /
• pp.5-17
• /
• 2017

Purpose - This study analyzes an economic effect on the project that Korean government supported for the vitalization of traditional markets using an input-output model. From 2002 to 2013, the government provided 180.8 billion won for a Management Modernization Project and 2.851 trillion won for a Facility Modernization Project for vitalization of traditional markets. Research design, data, and methodology - The present study conducted inter-industry analysis by matching industries related to the Traditional Market Project for the measurement, and calculated the ripple effect of each project. Result - The results from the study showed that from 2002 to 2012, the Management Modernization Project and Facility Modernization Project showed a 296.1 billion won effect on production inducement, a 158.7 billion won value-added inducement effect, and a 3,135-person effect on employment inducement in total. From 2002 to 2013, the Facility Modernization Project showed a 6.948 trillion won effect on production inducement, a 2.1109 trillion won effect on value-added inducement, and 40,209-person of effect on employment inducement in total. Conclusions - This study provided an empirical demonstration of a clear effect of the governmental support to traditional markets on developing regional economies. In particular, this study empirically analyzed and presented that there were a considerable amount of an economic effect by region due to governmental policy support to traditional markets.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.10a
• /
• pp.109-114
• /
• 1995

A preliminary study of the heterogeneity effect of spent P% fuel in CANDU was made using a reduced spent PWR fuel data base. The instantaneous core simulation has shown that the refueling ripple in the CANDU reactor is large if the spent PWR fuel is directly used. But the fuel heterogeneity effect can be reduced appreciably by blending spent PWR fuel with a small amount of fresh UO$_2$. The refueling simulation has shown that the operating margins of 6.0% and 8.7% are achievable for the peak channel and bundle powers, respectively, with the blended fuel.

• Journal of Industrial Technology
• /
• v.30 no.B
• /
• pp.41-47
• /
• 2010

Recently, the introduction of iPhone forced Korea to open its mobile market worldwide. The success of iPhone s open and cooperative code and the transition to the software-oriented paradigm also forces Korean mobile industry to greatly change according to the new trend for mobile market. Therefore, in this paper, to cope with such challenges, we investigate the effect of iPhone and then estimate its future prospect. Specifically, we focus on the effect on domestic mobile market, domestic software industry and individual's mobile life.

• Journal of the Korea Convergence Society
• /
• v.9 no.10
• /
• pp.325-338
• /
• 2018

This study investigated the effects of $6^{th}$ industry, which can be developed in various forms, on the Korean economy by classifying it as distribution and tourism type, and compared the difference between industrial characteristics and economic effect by $6^{th}$ industry type. To this end, the effects of production inducing effects, value added inducing effects, supply shortage effects and price ripple were analyzed using domestic input-output table to the latest published in 2014. As a result of the analysis, in the case of production inducing effect, the tourism in the $6^{th}$ industry as a whole was 0.4094KRW, the distribution was 0.4673KRW, and the tourism was 0.4715KRW. The value added inducing effect was 0.1527KRW in the $6^{th}$ industry, 0.1738KRW in distribution and 0.1696KRW in tourism. In the case of supply shortage effect, distribution effect was larger than that of production inducing effect and value added inducing effect, which was 0.5254KRW in the $6^{th}$ industry, 0.6704KRW in distribution, and 0.5070KRW in tourism. Finally, the effect of price ripple was 0.0959% for the $6^{th}$ industry, 0.0981% for distribution, and 0.0617% for tourism, which was lower than other $6^{th}$ industry types.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.5
• /
• pp.1031-1039
• /
• 2015

This study examines the economic ripple effect on the domestic information security manufacturing and service sectors through input-output analysis. The production inducement coefficient of the manufacturing sector is bigger than the average of whole industry, but that of the service sector is smaller than the average. On the other hand, the service sector is superior to the manufacturing sector in the value added and employment inducement coefficients. Forward and backward linkage effects of manufacturing and service sectors are generally lower than those of the average of whole industry. The information security industry has insignificant contribution to national economy and employment growth overall. In particular, the manufacturing sector records minus contribution to employment growth, which means that a lot of effort for increasing employment must be given further on in the sector.