• 제목/요약/키워드: Ring-light

검색결과 219건 처리시간 0.037초

광섬유격자센서와 회전광학커플러를 사용한 새로운 회전축의 토크 측정방법 (Torque Measurement of Rotating Shaft Using Fiber Bragg Grating Sensors and Rotary Optical Coupler)

  • 이종민;황요하
    • 한국소음진동공학회논문집
    • /
    • 제17권12호
    • /
    • pp.1195-1200
    • /
    • 2007
  • Torque of a rotating shaft has been mostly measured by strain gages combined with either a slip ring or telemetry. However, these methods have severe inherent problems like low S/N ratio, high cost, limited number of channels and difficult installation. In this paper, a new method using FBG(fiber bragg grating) sensors and a rotary optical coupler for online non-contact torque monitoring is suggested. FBG sensor can measure both strain and temperature, and has much batter characteristics than those of a strain gage. A rotary optical coupler is a optical connecting device between a rotating shaft and stationary side without any physical contact. It has been devised for transmitting light between a rotating optical fiber and a stationary optical fiber. The proposed method uses this rotary optical coupler to connect FBG sensors on the rotating shaft to instruments at stationary side. And a reference FBG sensor is also applied to compensate the insertion loss change of the rotary optical coupler due to rotation. Three FBG sensors have been fabricated in a single optical fiber. Two FBG sensors are attached on the shaft surface to measure torque and one sensor is installed at the shaft center to compensate the insertion loss change. The torque of a rotating shaft has been successfully measured by the suggested method proving its superior performance potential.

Colletotrichum gloeosporioides Penz.에 의한 시클라멘 탄저병 (Anthracnose of Cyclamen Caused by Colletotrichum gloeosporioides Penz.)

  • 김주희;최정식;최인영;정성희;이왕휴
    • 한국식물병리학회지
    • /
    • 제13권4호
    • /
    • pp.195-199
    • /
    • 1997
  • 1995년 12월 전라북도 지역 내에 유통되고 있는 시클라멘의 꽃잎 중앙부에 진회색~흑색 원형 반점을 형성하거나, 꽃잎 주변에 흑색 수침상을 나타내는 탄저병의 발생이 관찰되었다. 병반으로 붜 분리된 균은 PDA 배지상에서 회백색을 띄었으며, 8.3~15.0${\times}$2.5~6.3 ${\mu}m$ 크기의 양끝이 둥근 무색 단포의 원통형~타원형의 분새오자를 형성하였고, 갈색 곤봉형의 부착기와 이병조직에서 갈색 둥근형의 분생자층을 형성하였다. 이에 따라 시클라멘 탄저병징에서 분리한 병원균은 국내에서 미보고된 Colletotrichum gloeosporioides로 동정되었으며, 균사생장 및 분생포자 형성을 위한 배양적정 온도는 25~30$^{\circ}C$였다.

  • PDF

포풀라류의 결정에 관한 연구(I) - 황철나무와 양황철나무의 목부 및 수피종의 결정 (Study on the Crystals in the Populus spp.(I) - Crystals in the Woods and Barks of Populus maximowiczii and Populuss nigra × maximowiczii)

  • 이기영;김재경;김남훈;박완근
    • Journal of the Korean Wood Science and Technology
    • /
    • 제28권1호
    • /
    • pp.1-17
    • /
    • 2000
  • 황철나무와 양황철나무는 전형적인 다습심재(wetwood)로써, 심재 전체가 변재보다 높은 함수유를 나타냈다. 황철나무와 양황철나무의 목부중에 존재하는 결정은 주로 심재중에서도 일부연룬을 따라 또는 착색얼룩을 따라 또는 국소에 집중하여, 수에 가까울수록 많았다. 또한 1연륜 내에서는 만재보다 조재에 많은 경향이 있었다. 심재에서의 결정은 전 종류의 세포에 존재하였으나, 대부분의 결정은 도관과 섬유상가도관에 존재하였다. 수피중에 있는 결정은 내수피에서 외수피까지 비교적 산재하여 존재했다. 양황철나무에서는 잎옹이의 출현빈도가 높았으나 황철나무에서는 그 출현 빈도가 낮았다.

  • PDF

SM22α Is Required for Agonist-induced Regulation of Contractility: Evidence from SM22α Knockout Mice

  • Je, Hyun Dong;Sohn, Uy Dong
    • Molecules and Cells
    • /
    • 제23권2호
    • /
    • pp.175-181
    • /
    • 2007
  • The present study was undertaken to determine whether $SM22{\alpha}$ participates in the regulation of vascular smooth muscle contractility using $SM22{\alpha}$ knockout mice and, if so, to investigate the mechanisms involved. Aortic ring preparations were mounted and equilibrated in organ baths for 60 min before observing contractile responses to 50 mM KCl, and then exposed to contractile agents such as phenylephrine and phorbol ester. Measurement of isometric contractions using a computerized data acquisition system was combined with molecular or cellular experiments. Interestingly, the aortas from $SM22{\alpha}$-deficient mice ($SM22^{-/-LacZ}$) displayed an almost three-fold increase in the level of $SM22{\beta}$ protein compared to wild-type mice, but no change in the levels of caldesmon, actin, desmin or calponin. $Ca^{2+}$-independent contraction in response to phenylephrine or phorbol ester was significantly decreased in the $SM22{\alpha}$-deficient mice, whereas in the presence of $Ca^{2+}$ neither contraction nor subcellular translocation of myosin light chain kinase (MLCK) in response to phenylephrine or 50 mM KCl was significantly affected. A decrease in phosphorylation of extracellular signal regulated kinase (ERK) 1/2 was observed in the $SM22{\alpha}$-deficient mice and this may be related to the decreased vascular contractility. Taken together, this study provides evidence for a pivotal role of $SM22{\alpha}$ in the regulation of $Ca^{2+}$-independent vascular contractility.

화상처리법에 의한 쌀 품종별 판별기술 개발 (Development of Identification Method of Rice Varieties Using Image Processing Technique)

  • 권영길;조래광
    • Applied Biological Chemistry
    • /
    • 제41권2호
    • /
    • pp.160-165
    • /
    • 1998
  • 쌀의 품종 식별 기술은 아직까지 적절한 방법이 연구되지 않아, 최근 불법 유통사례가 빈번히 발생하고 있다. 따라서 본 연구에서는 보다 신속하게 현장에서 응용가능한 쌀의 품종을 식별하기 위해서, 비파괴 측정법 중 화상처리법을 응용하였다. MFG board, CCD camera, Zoom lens 및 Ring light로 구성된 화상처리 장치로 쌀알의 영상을 취득하여, Threshold, Median filtering으로 쌀알 영상의 노이즈를 제거하고, 윤곽을 추출하여 중심점에서 360도 각도에 대한 가장자리까지의 거리를 쌀알의 화상데이타로 이용하였다. 쌀 품종 내에서 영상 변이는 다소 있었지만, 형태가 상이한 쌀 품종에서는 품종간 변이 보다 품종 내의 변이가 적었으며, 동일 품종의 쌀알의 착립위치에 따라서는 변이 폭이 매우 적었다. 추출된 화상 데이터는 Normalize, FFT의 전처리 과정으로 정규화 및 변수 축소가 가능하였다. 각 품종의 쌀알의 평균 영상에 Matching하는 Library model과 BP neural network model에 의한 품종 판별 결과, 형태가 상이한 품종간에는 100% 판별 가능하였으며, 형태가 유사한 품종간에는 85%의 판별 결과를 나타내었다.

  • PDF

DETECTION OF WIDE PLANETARY SYSTEM WITH MICROLENSING

  • 류윤현;박명구;장헌영;이기원
    • 천문학회보
    • /
    • 제37권2호
    • /
    • pp.108.2-108.2
    • /
    • 2012
  • Recent results from microlensing surveys show that a free-floating planet or a wide-separation planet is more numerous than a main-sequence star in the Galaxy. Moreover, the detection efficiency of the planets will be improved in next-generation experiments with a high survey monitoring frequency. However, microlensing events produced by both planets appear similar light curves with a short duration timescale, thus it is difficult to distinguish them. In this paper, we investigated the detectable separation range of a wide-separation planet as the planet bound to its host star. We construct the fractional deviation maps using the magnifications of the planetary lensing and the single-lensing by planet itself for various parameters such as a mass ratio, separation, and source radius. As a result, we found that the pattern of the fractional deviation is related to the ratio of source radius to caustic size, and the ratio satisfying the detection criterion (i.e., ${\geq}5%$ in the fractional deviation) varies with a separation. Hence, we derived a fitting formula as the function of a mass ratio and a source radius to reflect the variation in the calculations of the detectable separation range of a wide-separation planet as the planet bound to its host star. In addition, we estimated the condition that a wide-separation planet can be detected as a single-lensing event under the finite source effect. We found that such a case is possible provided that the source radius is smaller than ~2.5 times of Einstein ring radius of a planet, regardless of a separation or a mass ratio.

  • PDF

THE CURRENT STATUS OF BIOMEDICAL ENGINEERING IN THE USA

  • Webster, John G.
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1992년도 춘계학술대회
    • /
    • pp.27-47
    • /
    • 1992
  • Engineers have developed new instruments that aid in diagnosis and therapy Ultrasonic imaging has provided a nondamaging method of imaging internal organs. A complex transducer emits ultrasonic waves at many angles and reconstructs a map of internal anatomy and also velocities of blood in vessels. Fast computed tomography permits reconstruction of the 3-dimensional anatomy and perfusion of the heart at 20-Hz rates. Positron emission tomography uses certain isotopes that produce positrons that react with electrons to simultaneously emit two gamma rays in opposite directions. It locates the region of origin by using a ring of discrete scintillation detectors, each in electronic coincidence with an opposing detector. In magnetic resonance imaging, the patient is placed in a very strong magnetic field. The precessing of the hydrogen atoms is perturbed by an interrogating field to yield two-dimensional images of soft tissue having exceptional clarity. As an alternative to radiology image processing, film archiving, and retrieval, picture archiving and communication systems (PACS) are being implemented. Images from computed radiography, magnetic resonance imaging (MRI), nuclear medicine, and ultrasound are digitized, transmitted, and stored in computers for retrieval at distributed work stations. In electrical impedance tomography, electrodes are placed around the thorax. 50-kHz current is injected between two electrodes and voltages are measured on all other electrodes. A computer processes the data to yield an image of the resistivity of a 2-dimensional slice of the thorax. During fetal monitoring, a corkscrew electrode is screwed into the fetal scalp to measure the fetal electrocardiogram. Correlations with uterine contractions yield information on the status of the fetus during delivery To measure cardiac output by thermodilution, cold saline is injected into the right atrium. A thermistor in the right pulmonary artery yields temperature measurements, from which we can calculate cardiac output. In impedance cardiography, we measure the changes in electrical impedance as the heart ejects blood into the arteries. Motion artifacts are large, so signal averaging is useful during monitoring. An intraarterial blood gas monitoring system permits monitoring in real time. Light is sent down optical fibers inserted into the radial artery, where it is absorbed by dyes, which reemit the light at a different wavelength. The emitted light travels up optical fibers where an external instrument determines O2, CO2, and pH. Therapeutic devices include the electrosurgical unit. A high-frequency electric arc is drawn between the knife and the tissue. The arc cuts and the heat coagulates, thus preventing blood loss. Hyperthermia has demonstrated antitumor effects in patients in whom all conventional modes of therapy have failed. Methods of raising tumor temperature include focused ultrasound, radio-frequency power through needles, or microwaves. When the heart stops pumping, we use the defibrillator to restore normal pumping. A brief, high-current pulse through the heart synchronizes all cardiac fibers to restore normal rhythm. When the cardiac rhythm is too slow, we implant the cardiac pacemaker. An electrode within the heart stimulates the cardiac muscle to contract at the normal rate. When the cardiac valves are narrowed or leak, we implant an artificial valve. Silicone rubber and Teflon are used for biocompatibility. Artificial hearts powered by pneumatic hoses have been implanted in humans. However, the quality of life gradually degrades, and death ensues. When kidney stones develop, lithotripsy is used. A spark creates a pressure wave, which is focused on the stone and fragments it. The pieces pass out normally. When kidneys fail, the blood is cleansed during hemodialysis. Urea passes through a porous membrane to a dialysate bath to lower its concentration in the blood. The blind are able to read by scanning the Optacon with their fingertips. A camera scans letters and converts them to an array of vibrating pins. The deaf are able to hear using a cochlear implant. A microphone detects sound and divides it into frequency bands. 22 electrodes within the cochlea stimulate the acoustic the acoustic nerve to provide sound patterns. For those who have lost muscle function in the limbs, researchers are implanting electrodes to stimulate the muscle. Sensors in the legs and arms feed back signals to a computer that coordinates the stimulators to provide limb motion. For those with high spinal cord injury, a puff and sip switch can control a computer and permit the disabled person operate the computer and communicate with the outside world.

  • PDF

휴대용 포도자동결속기 개발연구 (Development of the paper bagging machine for grapes)

  • 박광호;이영철;문병우
    • 현장농수산연구지
    • /
    • 제11권1호
    • /
    • pp.79-94
    • /
    • 2009
  • 본 연구는 우리나라 식용포도 재배농가의 보호봉지 결속작업이 주로 고령의 부녀자에 의존하고 있어 향후 이들 노동력을 대체하기 위하여 기계적인 포도보호봉지 결속장치를 개발하여 생산비를 절감하고자 얻어진 결과 는 다음과 같다. 1. 포도 보호봉지 및 포장봉지 결속기 개발 가. 자동결속기 설계는 CATIA V12/AUTOCAD 2000으로 하였다. 나. 자동결속기는 포도보호봉지를 기계적으로 묶어주는 장치로 소형, 경량이어야 하며 작업 시간, 노동량을 줄어 젊은층에서부터 고령자까지 작업할 수 있도록 설계하였다. 다. 자동결속기의 총 무게는 350g이하 초경량으로 제작될 수 있도록 하였다. 라. 결속성공률은 99%이상이 되도록 하였다. 마. 자동결속기의 결속롤과 커터, 배터리, 모터 등의 구조를 스테플러와 같은 가트리지형태로 개발하였다. 바. 카트리지 핀은 C-ring 28mm형으로써 길이는 500mm정도로 포도보호봉지 및 제과·제빵포장봉지를 결속할 수 있도록 제작하였다. 사. 작업시 포도나무 포도넝쿨 등 장애물의 영향을 받지 않도록 디자인을 설계, 제작하였다. 2. 포도보호봉지 결속작업시스템 포장실증시험 가. 자동결속기 시작기를 이용한 포도 보호 봉지결속으로 시기별 과병장, 과식품질이 무처리에 비하여 현저히 높았다. 나. 포도보호봉지 결속작업은 숙련자의 경우 1일 3,000개내외 씌우는 반면 초보자는 1,200개(37%)정도로 크게 떨어졌다. 다. 포도 보호봉지 자동결속기를 이용한 작업효율성은 102%로써 숙련자의 노동력을 대체할 수 있을 것으로 판단되었다. ∘ 1단계 : 232.5%(앞치마에서 보호봉지를 꺼내어 포도에 씌움) ∘ 2단계 : 60.7%(씌운 보호봉지 주름을 잡음) ∘ 3단계 : 104.7%(주름이 잡힌 상태에서 결속) ∘ 4단계 : 102% 라. 포도 보호봉지 결속부위의 둘레(크기)를 조사한 바 관행보호봉지결속작업(수작업)에서는 손으로 철사핀을 감기 때문에 평균 4.6cm이었으며 자동결속기의 결속롤(핀)은 5.3cm가 되어 다소 줄이는 것이 정밀성이 높을 것으로 판단되었다. 마. 수확시 과실 품질(과중, 과방크기-과장, 과폭, 가용성고형물, 산함량)을 조사한 결과 처리한 차이가 인정되지 않았다. 바. 자동결속기를 이용한 포도보호봉지 결속작업처리에서 포도의 열과(터진포도)와 이병율 차이에는 관행방법과 차이가 없었다.

PLLA-block-PMMA 공중합수지의 합성 및 이를 포함하는 PLA 이축연신 필름의 특성 (Synthesis of PLLA-block-PMMA Copolymer and Characteristics of Biaxially Oriented PLA Film Including the Same)

  • 김문선;이상은
    • 공업화학
    • /
    • 제26권3호
    • /
    • pp.251-258
    • /
    • 2015
  • 본 연구에서는 L-lactide를 이용하여 수평균분자량(Mn)과 중량평균분자량($M_w$)이 각각 12,000, 14,000 g/mol인 PLLA (Poly L-lactic acid) 수지를 합성하였으며, 이 PLLA를 이용하여 PLLA-Br 중간체를 합성하였다. PLLA-Br 중간체를 이용하여 수평균분자량($M_n$)과 중량평균분자량($M_w$)이 각각 84,000, 126,000 g/mol인 PLLA-block-PMMA (Poly L-lactic acid-block-Polymethyl methacrylate) 공중합체를 최종적으로 합성하였으며 PLLA-block-PMMA 공중합체의 유리전이온도($T_g$)는 $95.5^{\circ}C$, 열분해 개시온도는 $289^{\circ}C$이었다. PLA에 PLLA-block-PMMA를 9 phr 혼용하고 $95^{\circ}C$에서 3배 이축연신한 다음 $120^{\circ}C$에서 2 min 동안 저온열처리하여 두께가 $50{\pm}3{\mu}m$인 PLA 필름을 제조하였다. 550 nm 파장에서 측정한 PLA 필름의 빛투과율은 88.5%, 인장강도는 44.5 MPa이었으며 PLA 필름의 인장강도를 현 수준보다 개선하기 위해서는 이축연신후 $120^{\circ}C$의 온도조건에서 2 min보다 긴 저온열처리시간이 필요하였다.

유용(有用) 활엽수재(闊葉樹材)의 수축(收縮)에 관(關)한 연구(硏究) (Study on the shrinkage properties of commercial hardwoods)

  • 김영숙;이원용
    • Journal of the Korean Wood Science and Technology
    • /
    • 제4권1호
    • /
    • pp.8-14
    • /
    • 1976
  • 본(本) 시험(試驗)은 목재재질(木材材質)의 삼림생물학적(森林生物學的) 연구(硏究)의 일환(一還)으로 목재이용(木材利用) 및 가공(加工)의 기초요인(基礎要因)을 얻기 위(爲)해 유용(有用) 활엽수(闊葉樹) 13재종(材種)에 대(對)하여 방향별(方向別) 수축율(收縮率), 수종별(樹種別) 수축율(收縮率), 함수율(含水率) 1%에 대(對)한 평균(平均) 수축율(收縮率)과의 관계(關係), 연륜폭(年輪幅)과 수축율(收縮率)과의 관계등(關係等)을 비교검토(比較檢討)하였는데 그 결과(結果)를 요약(要約)하면 다음과 같다. 1) 활엽수재(闊葉樹材)의 수축율(收縮率)은 수종(樹種)에 따라 많은 차이(差異)가 있으며 이태리포플러, 양버들의 수축율은 작은 반면(反面) 박달나무, 느릎나무 등(等)의 수축율(收縮率)은 컸다. 2) 절선방향(切線方向), 반경방향(半徑方向) 및 섬유방향(纖維方向)의 수축율(收縮率)은 각각(各各) 9.01%, 4.98%, 0.37%로 공(共)히 절선(切線), 반경(半徑), 섬유방향(纖維方向)의 순(順)으로 작게 나타났으며 그 비율(比率)은 평균(平均) at : ar : al= 10 : 5.52 : 0.41로 나타났다. 3) 함수율(含水率) 1%에 대(對)한 평균수축율(平均收縮率)은 수종(樹種)과 방향(方向)에 따라 많은 차이(差異)가 있다. 4) 비중(比重)과의 관계(關係)에서는 비중(比重)의 증가(增加)에 따라 수축율(收縮率)도 점차 증가(增加)하는 경향(傾向)을 나타내고 있다. 5) 연륜폭(年輪幅)과의 관계(關係)에서는 연륜폭(年輪幅)이 넓어질수록 수축량(收縮量)은 감소(減少)하는 경향(傾向)이 있다. 6) 반경방향(半徑方向)의 수축율(收縮率)이 증가(增加)할수록 절선방향(切線方向)의 수축율(收縮率)도 점차 증가(增加)되고 있다.

  • PDF