• Journal of Plant Biotechnology
• /
• 제40권1호
• /
• pp.49-54
• /
• 2013

C3HC4-type RING zinc finger proteins essential in the regulation of plant processes, including responses to abiotic stresses. We previously isolated and examined the C3HC4-type RING zinc finger protein (BrRZFP1) from Brassica rapa under abiotic stresses. To elucidate the role of the BrRZFP1 transcription factor in gene regulation, we transformed tobacco plants with the BrRZFP1 gene. Plants were regenerated from 82 independently transformed callus lines of tobacco and analysed for transgene expression. Transgene integration and expression was confirmed by Southern and RT-PCR analyses, respectively. T2 plants displayed more tolerance to the bacterial pathogens Pectobacterium carotovorum and Ralstonia solanacearum, and the tolerance levels were correlated with BrRZFP1 expression levels. These results suggest that the transcription factor BrRZFP1 is an important determinant of stress response in plants and its overexpression in plants could increase biotic stress resistance.

• Journal of Plant Biotechnology
• /
• 제40권2호
• /
• pp.102-110
• /
• 2013

The novel BrRZFPs genes encoding C3HC4-type RING zinc finger protein were identified from FOX (full length cDNA over-expressing) library of Brassica rapa. Ten full-length cDNAs obtained from the library encode zinc-finger protein containing 346 amino acids, designated BrRZFPs. These genes were classified into four groups by phylogenic analysis showing conserved protein sequences at both termini. The tissue distribution of BrRZFPs transcription was examined by qRT-PCR revealing ubiquitous expression pattern. However, each gene was strongly expressed in the specific tissue. Transcriptional analysis showed that those acquired 10 genes were inducible under abiotic stresses. Likewise, the transcript of BrRZFP3 was strongly induced (~12-folds) by exogenous abscisic acid, whereas the transcripts of BrRZFP1, BrRZFP2 and BrRZFP3 were (> 9-folds) induced by cold. We suggest that these BrRZFPs that function as signal or response to abiotic stress are useful for crop improvement.

• 복식문화연구
• /
• 제17권5호
• /
• pp.866-877
• /
• 2009

The purpose of this study was to develop the dimension of hand pattern-making for Korean glove. The glove pattern-making has difficult problem in combination of anthropometric and engineering aspects. In addition, existing dimension data are not enough for glove pattern-making. Therefore, to develop the dimension for glove this study comprehensive list of candidate hand data was reviewed and the manufacturers(career over the 15 years) were interviewed on the method of glove. The result of comparing between the structures in hand and existing glove pattern, there draw deduction from follows. Pattern-making for glove need size of hand length, thumb length, index finger length, middle finger length, ring finger length, hand circumference, thumb-ring finger circumference and maximum hand thickness.

• 한국운동역학회지
• /
• 제17권3호
• /
• pp.217-224
• /
• 2007

This study was to investigate the effects of enslaving on finger-tip force of other fingers on finger pressing speed. We hypothesized that the effects depend on finger pressing speed, and the fingers proximity and are larger for fingers that are closer to each other. Six healthy, right-handed subjects(age: $27.1{\pm}4.3yr$, height: $175.4{\pm}7.2cm$, weight $71.3{\pm}5.8kg$) participated in the experiment. Each finger showed no significant on task finger speed. In the tasks with two neighboring fingers (e.g. middle and ring finger tasks), the index and middle fingers showed larger forces than the other neighboring fingers. During the index and little finger tasks, the enslaving force magnitude decreased with distance to the task finger (i.e. index finger enslaving force was the smallest during the little finger task).

• 한국운동역학회지
• /
• 제22권4호
• /
• pp.387-394
• /
• 2012

The purpose of this study was to compare and analyze the finger pressure and kinematic variables in the forehand hairpin net shot between skilled elite players and less skilled recreational players. Eight elite players(age: $18.1{\pm}0.8yrs$, height: $176.8{\pm}1.5cm$, weight: $640.9{\pm}48.6N$) with minimum of 6 years of experience and eight recreational players(age: $27.9{\pm}1.6yrs$, height: $177.1{\pm}6.1cm$, weight: $820.5{\pm}62.8N$) with less than one year experience were recruited in this study. For each trial being analyzed, four critical instants were identified from the video recordings: Right heel contact1 (E1), Right toe-off (E2), Right heel contact2 (E3), and Shuttlecock Impact (E4). Each hairpin net shot was broken into consecutive phases: E1~E2 (Right Landing Phase: RLP), E2~E3 (Sliding Step Phase: SSP), and E3~E4 (Impact Phase: IP). Temporal parameters, shuttlecock speed, linear and angular kinematics of body segments, and finger pressures were computed for this study. The results showed that The finger pressure of the ring finger and the middle finger for the skilled group during an impact had significantly greater than those of unskilled group. It is possible that all fingers were not used in the same manner when the racket was gripped in forehand hairpin. The result also suggested that the ring finger and the middle finger pushed the racket from top to bottom while having the mid-phalanx and proximal phalanx of index finger as an axis.

• 대한의생명과학회지
• /
• 제13권1호
• /
• pp.1-10
• /
• 2007

Nebulin, a giant modular protein from muscle, is thought to act as molecular ruler in sarcomere assembly. In skeletal muscle, the C-terminal ${\sim}50 kDa$ region of nebulin extends into the Z-line lattice. The most recent studies implicated highlighting its extensive isoform diversity and exciting reports revealed its expression in cardiac and non-muscle tissues containing brain. Also these novel findings are indicating that nebulin is actually a multifunctional filament system, perhaps playing roles in signal transduction, contractile regulation, and myofibril force generation, as well as other not yet defined functions. However the binding protein of nebulin and function in brain is still unknown. A novel binding partner of nebulin C-terminal region was identified by screening a human brain cDNA library using yeast two-hybrid system. Nebulin C-terminus binding protein 51 (NCBP51) was contained a RING-finger domain and identified a new isoform of RING finger protein 125 (RNF125). The interaction was confirmed using the GST pull-down assay. NCBP51 belongs to a family of the RING finger proteins and its function remains to be identified in brain. The role of nebulin and NCBP51 will be studied by loss-of-function using siRNA technique in brain.

• 제어로봇시스템학회논문지
• /
• 제16권9호
• /
• pp.876-882
• /
• 2010

Stroke patients can't use their hands because of the paralysis their fingers. Their fingers are recovered by rehabilitating training, and the rehabilitating extent can be judged by measuring the pressing force to be contacted with two fingers (thumb and first finger, thumb and middle finger, thumb and ring finger, thumb and little finger). But, at present, the grasping finger force of two-finger can't be accurately measured, because there is not a proper finger-force measuring system. Therefore, doctors can't correctly judge the rehabilitating extent. So, the finger-force measuring system which can measure the grasping force of two-finger must be developed. In this paper, the finger-force measuring system with a three-axis force sensor which can measure the pressing force was developed. The three-axis force sensor was designed and fabricated, and the force measuring device was designed and manufactured using DSP (Digital Signal Processing). Also, the grasping force test of men was performed using the developed finger-force measuring system, it was confirmed that the grasping forces of men were different according to grasping methods.

• Annals of Clinical Neurophysiology
• /
• 제6권2호
• /
• pp.98-102
• /
• 2004

Background: Carpal tunnel syndrome (CTS) is a common condition characterized by entrapment neuropathy of the median nerves. Clinical manifestations are the most important findings for diagnosis and assessment of therapeutic effects. But, objective indicators, such as electrophysiological findings, are also valuable supplementary tools. This study investigated the relationship between clinical grading and sensory nerve conduction velocity (SNCV) of median proper palmar digital nerve (MPPDN) in CTS patients. Method: This study was done on 90 upper limbs of 53 patients with CTS (men: 6, women: 47, age: 26~69 years, mean age; 52 years). Each SNCV of MPPDN was recorded with bar electrode using antidromic method. Each SNCV was compared with clinical grading of CTS. The clinical grades of CTS were designated as follows; group 1 is mild symptoms, 2 is moderate symptoms, and 3 is severe and longstanding symptoms. Result: In thumb, the SNCV of MPPDN was not different significantly between 3 groups (p=0.817). In the index finger, the SNCV was the fastest in the group 1, but faster in group 3 than in group 2 (p=0.001). In the middle and ring fingers, SNCV was decreased in higher clinical grading groups (middle finger: p=0.015, ring finger: p=0.044). Conclusion: SNCV of MPPDN of middle and ring finger correlated with the clinical grading of CTS. SNCV of index finger was the fastest in group 1. But SNCV of thumb did not correlate with the clinical grading of CTS.

• 암석학회지
• /
• 제1권2호
• /
• pp.91-103
• /
• 1992

Eruptive mechanisms and processes at Udo tuff cone can be inferred from indicative characters of products, bedforms and lithofacies, and ring faults. In terms of bedforms and lithofa-cies in particular, massive lapilli tuff beds and chaotic lapilli tuff beds are derived from subaerial falls of aggregated tephra of wet tephra finger jets, occurring dominantly at the lower sequences of proximal part at the tuff cone. Crudely stratified lapilli tuff are derived from subaerial falls of slightly aggregated tephra of less wet tephra finger jets, whereas reversely graded lapilli tuff beds are from slightly disaggregated subaerial falls of continuous uprush. Both beds frequently occur in the middle sequences at proximal and near medial part of the tuff cone. Block and lapilli tephra lenses, ash-coated lapilli tephra beds(lenses) and thin-bedded tuff beds are derived from extremely disaggregated subaerial falls of dry tephra in the continuous uprush, frequently occurring at the upper sequences of medial part at the tuff cone. Udo tuff cone is a basaltic volcano emergent through the sea water surface while water could flood across or into the vent area. Emergence of the tuff cone was from the type-Surtseyan eruption characterized by earlier tephra finger jets and later continuous uprush columns of tephra with copious volumes of steam. Explosions began when boiling of wter produced a bubble column reducing the hydrostatic pres-sure, allowing exsolution of gases from the magma. This expansion of magma into a vesiculating froth fragmented the magma and permitted mixing of magma and water so that a more vigorous generation of steam could proceed. Tephra finger jetting explosions continued to build the crater rims, then remove water from the vent that their deposits flowed like slsurries until the continuous uprush explosion ensued. Continuous uprush explosions were associated with most rapid accumula-tion of tephra. The increasing volume rate led to partial removal of water from the vent area by the newly tephra ring so that more vigorous activity could be attended by a reducing water supply. This might restrain surplus of cold water entering the vent and thus enhance the vigour of the eruption by allowing optimal heat exchange. Eventually the crater became so deep and unsuported that piecemeal sliding, or massive subsidence on indipping ring faults, filled and closed the vent, and the cycle of explosions and collapse began anew.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.2891-2894
• /
• 1999

This paper proposes an alternative personal identification algorithm using finger crease pattern which is assumed to overcome the disadvantages of the existing biometrics system. We used a CED camera with LED lighting as the input device. The original images were treated by employing a lowpass and highpass Jilter to get the reinforced finger boundaries and finger crease patterns, thereby threshold is applied. We tracked the boundaries of the finger and extracted the Images of the index, middle, and ring finger, thereafter applied noise reduction operation. In the last step, we performed the verifications of a person by matching one dimensional profiles of finger crease patterns. This algorithm shows the possibility of an alternative biometrics identification system to the current ones. Lastly, the comparative evaluation on our system and the other algorithm is presented.