• 소성∙가공
• /
• 제27권3호
• /
• pp.165-170
• /
• 2018

In order to increase the lifetimes of cold forging dies, insert rings are generally used. In this study, an insert ring and shrunk ring of the flange upsetting die were designed for the cold forging of an automotive wheel nut. The Stress distribution occurring in the die during forging was simulated using a commercial finite element analyzing program. The effects of the fitting interference and inclined angle of the insert ring on the compressive stress of the die inside were also investigated. The simulated data were compared with the real lifetimes of the forging dies. The maximum compressive stress acting on the edge of a forging die should have the most influence on die lifetime, an idea which could help develop the die design with the longest lifetime. The design of the most optimal forging die with the longest lifetime is made possible by analyzing the maximum inner pressure and principal stress between the shrunk ring and insert ring.

• Design & Manufacturing
• /
• 제11권3호
• /
• pp.46-50
• /
• 2017

Press processing is one of the best machining methods capable of mass production, satisfying dimensional, shape and quality among the methods of processing a metal plate. Among them, Fine blanking is a method of obtaining a precise cross-section such as machining of the shear surface shape. In this research, Using SCP-1 and SHP-1 materials. The deformation behaviors of the material flow affecting the die height of the shear section in accordance with the position of the V-ring in the Fine blanking were compared and analyzed. Result of interpretation, It was confirmed that the force acts on the position where the material flow direction accurately forms the die roll that the material of SCP-1 is at a position of 1.5 mm and the material of SHP-1 is at 2.0 mm. As a result, it was confirmed that the state of fo1111ing the shear surface by the V-ring was excellent. Using analysis results, In the experiment, the height of the die roll was considered by applying The position of the V-ring was 1.5 mm in SCP-1 and 2.0 mm in SHP-1. As a result of comparing the height of the die rolls, the height values of the die rolls were different from each other, It has been considered that the tendency of the die rolls to coincide with each other. It is considered that the difference of the die roll height is caused by the pressure input of the V-ring. In this study, the deformation behavior of the material(In addition to the position of the V-ring, the flow direction of the material depends on the shape of the V-ring and the Indentation amount) is considered to be an important factor in determining die roll height.

• 한국정밀공학회지
• /
• 제18권12호
• /
• pp.145-151
• /
• 2001

The dimensional accuracy of the cold forged part is depended on the elastic characteristics of the die. To increase the stiffness of the prestressed die, the first stress ring of the tungsten carbide alloy (WC) is considered. For the design, Lame's equation is used. Diameter ratios and interferences have been determinated by maximum inner pressure without yielding of materials. The design of the prestressed die has been compared with the conventional one. For the comparison, the FE-analysis using ANSYS has been performed. The results indicate that the prestressed die with the high stiffness can be obtained by the using the high stiffness material as the first stress ring.

• 한국산학기술학회논문지
• /
• 제13권5호
• /
• pp.2009-2014
• /
• 2012

기어의 파인 블랭킹에서 기능면으로 사용되는 전단면(잇 면)을 최대한 확보하기 위하여 다이 롤 높이(die roll height)의 최소화는 매우 중요하다. 본 논문에서는 파인 블랭킹 금형의 핵심 설계 요소인 V-링 위치와 다이 챔퍼(die chamfer) 형상에 따라 기어의 다이 롤 높이 변화를 고찰하기 위하여 V-링 거리와 다이 챔퍼 형상이 다른 여러가지 다이 편 및 가이드 플레이트 편으로 구성된 파인 블랭킹 금형 세트를 제작하여 실험하였다. 각 실험으로부터 시편을 채취하여 다이 롤 높이를 측정 분석한 결과 파인 블랭킹 기어의 다이 롤 높이는 각 모듈에서 다이 챔퍼 각도가 증가함에 따라 증가하고 V-링 거리가 증가함에 따라 증가됨을 알 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1476-1479
• /
• 1996

발전설비나 자동차 그리고 항공우주분야에 사용되는 각종 bearing, 원형부품들에 사용되는 ring을 생산하는 방법중, 가장 효과적이고 경제적인 방법은 ring rolling (ring 압연)이다. 이 방법은 직경 50cm에서 2m이상의 원형 ring을 연속적으로 짧은 시간내에 (한 ring당 약 1분) 생산 가능하다. 이제까지의 수학적 모델을 사용한 제어시스템은 ring의 단면적이 사각형인 제품에는 최소한의 오차로 생산 가능하였으나, plant의 생산성과 제품의 다양성을 위하여 ring의 단면적이 복잡한 것을 생산시에는 문제점이 노출되었다. 왜냐하면 기존의 수학적모델이 roll gap 또는 metal forming zone에 근거하여 modelling하였기 때문이다. 본 논문에서는, 이러한 문제점을 고전적인 수학적 모델을 기초로한 adaptive control system의 방법대신에, 축적된 control system설계와 운용 경험을 이용하여 설계한 퍼지제어기 및 그것의 실적용 그리고 그 결과를 소개한다. 실적용 결과는, 제조된 단면적이 상대적으로 복잡한 bearing의 형상이 (filling grad)이 제어기의 제어정도 판단기준이었는데, 99.5%의 형상도를 보임으로서 industry에서 요구하는 제품기준을 만족시켰다. 또한 짧은 제어기 설계 및 on-line optimization 기간 또한 이 제어기의 장점이었다.

• 소성∙가공
• /
• 제11권4호
• /
• pp.363-370
• /
• 2002

In this study, an optimal design technique was investigated for determining appropriate dimensions of components of the die set used in the extrusion process. For this, an axi-symmetric elastic finite element program for the analysis of deformation of the shrink fitted die set was developed with the Lagrange multiplier method to implement the constraint condition of shrink fit of stress ring. By coupling the rigid-viscoplastic analysis of extrusion process by CAMPform and elastic analysis of the die set, the optimization study was made by employing optimization program DOT. Considering the various assembly conditions, optimal design was determined for a single stress ring case. It is construed that the proposed design method can be beneficial for improving the tool life of cold extrusion die set at practice.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.377-380
• /
• 2000

The dimensional accuracy of the cold forged part is depended on the elastic characteristics of the die. To obtain the high stiffness of the prestressed die, the first stress ring of the tungsten carbide material is considered. For the design, Lam 's equation is used. The design of the prestressed die has been compared with the conventional that. For the comparison, the FE-analysis using ANSYS has been performed. The results indicate that the prestressed die with the high stiffness can be obtained by the using the high stiffness material as the first stress ring.

• 한국정밀공학회지
• /
• 제16권6호
• /
• pp.114-122
• /
• 1999

By using the FEM, a method for the stress analysis of the presented dies has been proposed. In this method, FEM and Lame equation are used for the analysis of the die insert and the stress ring, respectively. The proposed method includes the calculation of the contact pressure between the die insert and the stress ring. To show the validity, the proposed method has been applied to the simple test problem. The results of the stress analysis have been compared with the results of ANSYS, a commercial FE-code. Cold extrusion has been simulated by using the rigid-plastic FEM and the results of the deformation analysis have been used as the input of the die structure analysis. The stress states of the prestressed extrusion die have been obtained. The stress analysis of the die insert with stress rings has also been performed during extrusion.

• 한국산학기술학회논문지
• /
• 제14권12호
• /
• pp.6060-6065
• /
• 2013

유효 전단면의 크기를 최대가 되도록 하기 위해서는 다이 롤 높이의 최소화가 매우 중요하다. 본 연구에서는 V-링 압입량의 변화와 클리어런스의 변화에 대한 다이 롤 변화를 연구하였다. V-링 거리를 2mm로 고정하고 클리어런스가 다른 다이인서트를 적용할 수 있는 파인블랭킹 금형을 제작하여 전단해석과 실험을 진행하였다. 각 실험으로부터 시편을 채취하여 다이 롤 높이를 분석한 결과 V-링의 압력이 재료의 유동을 효과적으로 억제하고 펀치와 다이 사이의 클리어런스가 재료 두께에 대하여 1%의 경우가 다이 롤 높이가 낮게 됨을 알 수 있었다.

• 한국정밀공학회지
• /
• 제18권3호
• /
• pp.40-46
• /
• 2001

An integrated analysis for the thermo-elastic deformation, fatigue, wear and brittle damage evolution of the shrink-fitted die with multi stress-ring of dissimilar materials is presented. A simple numerical algorithm for the moving elastic boundaries characterizing the contacts of the insert and multi stress-rings is presented. The initial stress distribution in the die due to shrink-fit is considered and the traction at the die surface contacting with the work piece is obtained by analyzing the elasto-plastic deformation of work piece. Elastic analysis of the separate-type die is performed and then the evolution of brittle damage, wear and fatigue life are predicted. This integrated analysis is applied to the extrusion die with two layers of stress-rings and the results are discussed in detail.