• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.880-885
• /
• 2005

RIB(Rigid Inflatable Boat)형 보트는 선체, 팽차식 선측튜브를 적용한 고속 다목적보트로 뛰어난 내항성능과 높은 안전성으로 해외 선진국에서는 해양레저 활동에 적합한 신개념 고부가가치 보트로 각광받고 있으나 국내에는 레저용 RIB 보트의 제작 및 개술개발 실적이 전무한 실정이다. 이에 본 연구에서는 고속이면서도 안정성 및 편의성을 고려한 레저용 RIB의 최적선형 설계 및 공간배치 연구, 하이파론 선측튜브 설계, 조선학적 제계산을 통한 주요성능 검토 등을 통하여 최근 급증하고 있는 해양레저 수요에 대응한 6m급 RIB형 레저보트를 개발하고자 하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.5
• /
• pp.606-613
• /
• 2007

The 6m class high speed boat is developed with a durable hull and inflatable tube, which is called RIB(Rigid Inflatable Boat), for the purpose of marine leisure. In the stage of the conceptual design, its requirements to be optimized are determined based on the presented information of similar marine leisure RIBs. The 3-D graphical technique using Marine Rhino is utilized to optimize the compartment layout of RIB. The stability analysis is performed for the light and full load conditions with and without the inflatable tube. In addition, the sea keeping and hydrodynamic performance was tested using the proto-type ship in the sea condition. From the results of the computation and the sea trial test, it shows that the performance of the marine leisure RIB satisfies the speed, the convenience, and the stability requirements. This study provides the typical information of the design factors and the procedure to manufacture the marine leisure RIB.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.1 s.145
• /
• pp.128-133
• /
• 2006

This study is focused on the skill to prevent RIB (Rigid Inflatable Boat) from sinking. For better ability to prevent sinking, single hypalon tube is replaced by double TPU (Thermoplastic Polyurethane) tube that is excellent at frictional wear strength and oil-resisting qualities. High buoyant materials are arranged in empty spaces of ship so that ship's spare buoyancy is increased. And for restoration of stable position of ship, the self-righting system is installed. Aluminium alloy is used for increasing hull strength.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.4 no.4
• /
• pp.488-503
• /
• 2012

The stern boat deployment system was investigated to evaluate the capability of launching and recovering rigid hull inflatable boat (RHIB) via the stern ramp. The main parameters to launch and recover RHIB were tested at the design stage. The combined hydrodynamic effect of the stern wake and the water jet flow made it difficult to maintain the maneuvering and sea-keeping ability of RHIB approaching to the stern ramp. The safe recovery course was proposed to maintain the directional control of RHIB and to reduce the combined hydrodynamic effect in the transom zone. To evaluate the feasibility of RHIB recovery, the stern sill depth was measured in various conditions and the ramp availability time was obtained. Also, the experimental percent time operability (PTO) test was performed by the number of successive launching and recovering operations.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.3
• /
• pp.462-468
• /
• 2010

A new course keeping controller for RIB(Rigid Inflatable Boat)-type USV(Unmanned Surface Vehicle) is developed using pilot's steering pattern. A pilot's simple steering pattern is found out from various course change tests. It is used to course keeping algorithm, suitable for large course change more than 60 degrees. To validate the course keeping controller, sea trial tests are conducted. From sea trial test, new course keeping controller shows good performance with less overshoot, maximum roll angle less than $20^{\circ}$, which makes it possible that fast course changes without slip motion of USV.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.6
• /
• pp.572-578
• /
• 2007

A Rigid Inflatable Boat (RIB) is now widely used for commercial and military purpose. In this paper, it is supposed that seven-meter-class RIB be used as an unmanned target ship for naval training. In order to develop many tactical maneuvering patterns of a target ship, a simple horizontal maneuvering model of a RIB is needed. Therefore, models of speed and yaw rate are constructed as the first-order differential equations based on Lewandowski#s empirical formula for steady turning circle diameter of a conventional planning hull. Some parameters in the models are determined using the results of sea trial tests. Finally, proposed models are validated through the comparison of the simulation result with the sea trial result for a specific scenario. Even though a simple model does not represent the horizontal motion of a RIB precisely, however, it can be used enough to develop tactical trajectory patterns.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.1
• /
• pp.8-14
• /
• 2011

RIB(Rigid Inflatable Boat) is widely used for coastal transportation in the commercial use and for ISR(Intelligence, Surveillance, Reconnaissance) in the military use. Since RIB is around 10 meters in length and over 30 knots in speed, its motion characteristics in waves is quite different from a large scale ship. When it turns, large roll occurs and heeling direction is opposite to the large ship's case. Currently, many countries are developing USV(Unmanned Surface Vehicle) of which type is RIB. In order to develop high performance autopilot and way point controller, it is very important to identify RIB's motion characteristics. In this paper, sea trial test results of a 7-meter RIB such as speed, turning, zig-zag, and way point control tests were represented and its resistance and propulsion model was identified by using sea trial data and Savitsky's formula. In addition, the state space model which will be used in the identification of the four-degree-of-freedom dynamics in the next step was formulated and the identification procedure was proposed.

• Journal of Navigation and Port Research
• /
• v.33 no.1
• /
• pp.35-41
• /
• 2009

A waypoint tracking algorithm(WTA) is designed for Unmanned Surface Vehicle(USV) in which water-jet system is installed for propulsion To control the heading of USV for waypoint tracking, the steering nozzle of water-jet need, to be controlled. Firstly, target heading is calculated by using the position information of waypoints input from the land control center. Secondly, the command for the steering nozzle of water-jet is calculated in real time by using the heading and the rate-of-turn( ROT) from magnetic compass, In this study, in order to consider the drift angle due to external disturbance such as wind and wave, the course of ground( COG) can be used instead of heading at higher speed than a certain value, To test the performance of newly-designed WTA, the tests were carried out in actual sea area near Gwang-an bridge of Busan. In this paper, the sea trial test results from WTA are analyzed and compared with those from manual control and those from commercial controller.