• Journal of Animal Science and Technology
• /
• 제62권3호
• /
• pp.313-320
• /
• 2020

This research was performed to investigate the hypothesis that dietary mono-component protease (PRO) might improve growth performance, nutrient digestibility, and carcass characteristics of growing-finishing pigs. A total of eighty-four pigs [Duroc × (Landrace × Yorkshire), 25.3 ± 2.16 kg initial body weight] were randomly assigned to three dietary treatments (7 replicates/treatment; 2 barrows and 2 gilts/replicate) in a randomized complete block design (block = sex). The dietary treatments were prepared as follows; (1) a positive control (PC) as a typical growing-finishing diet based on corn and soybean meal, (2) PC added with 0.015% of PRO (PCPRO), and (3) a negative control (NC) added with 0.015% of PRO (NCPRO). The NC had a lower concentration of crude protein (CP) compared with PC. The PRO was a commercial product that contained 75,000 protease units/g and derived from Nocardiopsis prasina produced in Bacillus licheniformis. Dietary treatments were offered to pigs during growing and finishing periods. Measurements were growth performance, apparent total tract digestibility (ATTD) of nutrients, and carcass characteristics. The PCPRO and/or NCPRO increased average daily gain (ADG) and gain to feed ratio (G:F) during growing (p < 0.10), finishing (p < 0.05), and growing-finishing periods (p < 0.10) compared with PC. Furthermore, pigs fed PCPRO and NCPRO had higher (p < 0.05) ATTD of CP and energy during growing and/or finishing periods than those fed PC. In conclusion, the supplementation of PRO in diets improved growth performance and protein digestibility of growing-finishing pigs.

• 한국전산구조공학회논문집
• /
• 제29권1호
• /
• pp.45-52
• /
• 2016

자전거의 안장 지주에 영구자석의 척력을 이용하여 완충장치를 설치하고자 자기 해석용 상용프로그램을 이용하였다. 유한요소법으로 구한 해석치를 실험치와 비교하여 유한요소 해석치의 신뢰성을 확보하였다. 그 후에 3 자유도계의 자전거 동역학 모델을 완성하고 자석의 크기에 상응하는 등가 스프링 강성값을 모델에 이식하였다. 자전거의 동역학 모델에서 전륜과 후륜은 주행면의 비평탄도에 의한 입력을 부담하도록 하였다. 전륜과 후륜이 독립적으로, 또는 동시에 반삼각 범프(half-triangular bump)와 정현파 굴곡로(sinusoidal road)를 통과할 때의 동적 거동을 살펴보았다. 운전자와 프레임의 수직거동, 주행방향의 피칭 거동을 관찰하였으며 자전거의 완충 시스템을 보다 구체화할 수 있는 기반을 마련하였다.

• 한국융합학회논문지
• /
• 제8권3호
• /
• pp.31-40
• /
• 2017

환경 친화적인 개인 이동수단의 부상은 세계적인 추세이며, 국내최초 IT 융합 전기스케이트보드인 유스보드가 트렌드를 선도하기위해 개발되었다. 유스보드는 블루투스 v4.0 통신을 통해 유스웨어러블컨트롤러 또는 유스앱을 사용하여 원격으로 제어 가능하며, 최고 시속 25 km/h 속도를 낼 수 있고, 최대 운행 시간은 약 1.5 hr이다. 유스보드 데크 앞면에 위치한 LED 디스플레이는 라이더에게 세 가지 상태, 즉 배터리 잔량 SOC, 현재 주행속도, 그리고 제동량을 표시해 준다. 유스보드와 유스웨어러블컨트롤러 간의 실내 EMC 테스트 결과와 실외 실주행 테스트 결과가 분석되었으며, 특히 실주행 테스트로부터 타사 전기스케이트보드 대비 최대 전류를 약 15% 낮춤으로서 모터제어기의 부하 부담을 줄였다. 이러한 분석 결과들은 유스보드가 타사 전기스케이트보드들보다 작고 가볍고 저렴하며 이는 개인 이동수단으로 유용함을 나타낸다.

• 한국지구과학회지
• /
• 제25권5호
• /
• pp.327-335
• /
• 2004

본 연구는 초등학교 과학과 문제중심학습에서 협동기술 훈련의 효과를 밝히기 위하여 통제집단, 문제중심학습 집단, 협동기술 훈련을 한 문제중심학습 집단의 학습능력 수준에 따라 과학 성취도와 자아존중감을 조사하였다. 본 연구의 결과, 학습능력이 높은 학습자는 협동기술 훈련에 무관하게 문제중심학습이 전통적 수업보다 효과적인 것으로 나타났다. 학습능력이 중간인 학습자와 낮은 학습자는 협동기술 훈련을 한 경우, 전통적 수업 집단보다 과학 성취도가 높게 나타났다. 이로써 협동기술 훈련이 학습능력이 중간 이하인 학습자에게서 발생하는 무임승객효과를 줄이고 소집단활동의 협력적인 상호작용에 긍정적인 영향을 미치는 것으로 밝혀졌다. 자아존중감은 문제중심학습 집단이 통제 집단에 비해 유의미하게 높게 나타났고 학습능력에 따른 상호작용 효과는 없었다.

• 한국의상디자인학회지
• /
• 제14권4호
• /
• pp.179-190
• /
• 2012

During recent few years, Bike is arising as one of the most important item of sports market. As well as in domestic markets, customers are demanding specific brands only for young aged riders. Therefore, this study researched current bike wears and suggest digital textile printing with sports wear trends which also have safety and visual impact effectiveness, so it can be satisfied as green products and we also try to suggest sports sensitivity of existing cycle wear to city fashion. The purpose of this study is to figure out 20's-30's female biker attitude for bike wear and their purchasing habits and also their preference, digital textile design of city biker wear based on present condition research of riding wear markets and to establish high quality products with occupying high percentage of global markets and making high profits. For this study, bike wear distributors Survey First, foreign companies generally meet evenly sampling the 20s and 30s targeted vendors 10 companies were selected. 'city sporty ware' or 'casual line' dual 'extreme line' from all manufacturers, including, however did not distinguish it from all the vendors. This higher proportion of the recent upsurge in public and non-professional riders, despite the fact that you can see that the lack of 'Extreme line' compared to the 'casual' line of the city sporty ware production. overall seasonal sales in the spring appeared windbreak jacket, leggings and sweat emissions and at the same time built into the fabric dry faster T-shirt and shorts in the summer sales were higher. autumn jacket and produced excellent warm in winter fleece fabric T-shirts, pants, windshield jacket higher sales. showed improvements in design, improved in the order of the highest and perfect for everyday wear for both. As mentioned, we figure out 20's-30's female rider's attitude for riding suit and their purchasing habits and also their preference, so we can develop riding suit design based on their needs and suggest new design patterns.

• 한국컴퓨터정보학회논문지
• /
• 제18권2호
• /
• pp.141-147
• /
• 2013

비즈니스 교육 현장에서 학생들의 팀 활동은 매우 흔한 현상이 되었다. 그러나 팀 활동에 대한 학생들의 사회적 태만과 무임승차 현상은 교수자에게 있어서 해결하기 어려운 문제로 남는다. 이에 본 연구는 '넌 해고야' 방식을 우리 대학의 비즈니스 교육 현장에 해당 방식을 적용해보고, 실질적 효과가 있는지 활용가능성을 검증하였다. '넌 해고야' 방식은 2단계를 거쳐 팀 프로젝트 활동을 실시하는 수업에 간단하게 적용할 수 있다. 팀원들은 팀 활동에 참여하지 않는 무임승차자에 대한 구체적 내용을 이메일로 당사자와 교수자에게 동시에 보내 공식적으로 경고하고, 이후에도 팀 참여 활동이 수정되지 않으면 두 번째 이메일로 팀에서 해고시킬 수 있다. 총 257명의 학부 학생을 대상으로 '넌 해고야' 방식의 실질적 효과를 검증한 결과, 무임승차를 방지하고 팀 활동 참여와 학습 동기를 촉진하는 효과적인 기제로 활용될 수 있음이 밝혀졌다.

• 한국컴퓨터정보학회논문지
• /
• 제24권5호
• /
• pp.93-102
• /
• 2019

The nation's fraternity and elite players who have built up a global bicycle infrastructure often find it to be a problem with the bicycle's speed and speed reduction, pain in knees and hip joints, or even with the bike itself, or with the bike's own physical defects or a riding posture. However, we found that most cases of cleat adjustment errors were likely to be true. Accurate adjustment of the cleats is the most important of the entire fitting process and can be the basis for improving the ability of the bicycle rider and preventing injury. Therefore, the study was intended to give a prior study of bicycle fitting, which can improve bicycle efficiency and prevent injury when riding bicycle, and specific ways of adjusting bicycle shoe cleats, and the following results were obtained. First, the cleat characteristics of Shimano, LOOK and Speedplay, which are currently used in public, and the characteristics during the cleat adjustment process, were derived. In addition, the structure and characteristics of dedicated shoes using cleats and the method of using pedalling by the structure of shoes after adjusting the cleats were derived. Second, the position of the shoe and its relationship with torque in pedalling was discussed, and the method of adjusting front and back of cleats was derived. Third, leg length, ASIS, Q-Angle and Q-factor etc. were analyzed and the method of setting and adjusting cleat left and right values were derived. Fourth, the relationship between walking angle and cleat rotation was analyzed, the method was derived, and the torque size and angle behind the cleat adjustment were compared and analyzed using the spinner to indicate the torque and the effective mean torque angle after the cleat adjustment.

• Safety and Health at Work
• /
• 제12권2호
• /
• pp.147-153
• /
• 2021

Background: In this study, the association of work and demographic characteristics with different traffic offenses committed by food delivery riders in Greece was examined. Previous research has identified various factors related to risky driving however, there is a need for exploring the complex interrelationship of work-related factors underlying risky driving behavior. Materials and Methods: A 2-items uestionnaire was used exploring delivery riders demographic characteristics, terms of employment, issues of concern during work and type of traffic offenses committed. In total, uestionnaires were analyzed using logistic regression in order to identify characteristics independently associated with serious traffic offenses, namely, red-light running and helmet non-use. Results: The analysis showed that: (i) typical health and safety measures had no effect on serious traffic offenses, (ii) young age was related to both offenses however (iii) different sets of work conditions were associated with reports of red-light running (i.e. low work experience, use of personal vehicle for work, and payment by hour) and helmet non-use respectively (i.e. intense work pace, high tip income per day and low concern about vehicle condition). Conclusion: The above findings provide evidence that serious traffic offenses are manifestations of underlying conflict experienced by the riders between safety and various performance criteria. Each one of the two offenses is related to different rider profiles aiming to satisfy different goals, namely, those mainly trying to maximize profit non-helmet users and those, mostly inexperienced ones, trying to cope with work pressure red light runners. Potential regulatory measures to alleviate risky practices are discussed.

• 대한안전경영과학회지
• /
• 제24권2호
• /
• pp.41-50
• /
• 2022

The food delivery platform labor market has been continuing to grow rapidly in Korea, which resulted in traffic accident increases of delivery riders. To prevent traffic accidents while delivery, this study conducted a survey for 462 delivery riders and analyzed the statistical relationships of delivery characteristics and risk perception with delivery accidents. The results of this study revealed that riders with young age (20s: 46.6%) and/or low delivery experience (less than 1 year: 50.6%) had significantly higher proportion of accident experience than other age groups (over 40s: 36.2%) and high delivery experience (more than 2 years: 36.4%). In addition, side job riders (61.5%) showed significantly higher proportion of accident experience than main job riders (39.1%). The riders with accident experience had more number of deliveries per hour (weekday: 3.56, weekend: 3.91) than the riders without accident experience (weekday: 3.29, weekend: 3.68). Lastly, the riders with accident experience rated significantly higher perceived level of risk on weather, violation of traffic laws, uninspected motorcycle, receiving calls while driving, missing safety training, missing personal protective equipment than the riders without accident experience. This study suggested four aspects based on the study results to prevent traffic accidents for delivery riders.

• 한국안전학회지
• /
• 제37권1호
• /
• pp.70-77
• /
• 2022

The total number of Korean restaurants using delivery applications has substantially increased from 7.6% in 2018 to 11.2% in 2019. In 2020, the gross sales in the food delivery service market reached approximately 17 trillion won; this amount is virtually six times that in 2017 (i.e., 2 trillion won). Meanwhile, the annual average death toll of motorcycle riders increased by 3.5%, whereas the number of deaths due to other traffic accidents decreased by 8.2%. Consequently, the foregoing has become a critical social problem. Despite the continuing increase in the number of delivery riders due to the rapid expansion of the delivery industry, no appropriate safety management system has been established. Moreover, the government is experiencing difficulties in assessing the exact situation because of the absence of competent authority. In this study, fundamental data on the characteristics of delivery work and motorcycle accidents were collected through surveys and interviews; then, the influencing factors of traffic accidents were analyzed. Different influencing factors were identified: work experience as a rider; number of deliveries; whether to accept delivery requests in transit; manner of accepting delivery requests; and traffic law violations, such as speeding (for faster delivery) and running a red light. Because the motorcycle delivery industry has a relatively low job-entry barrier (i.e., special qualifications are not required), the riding skills of riders must be improved, and delivery companies must be technically developed to achieve a safe working environment. The results of this study can be utilized as fundamental data for system development or structural improvement of the delivery industry.