• Journal of Applied Biological Chemistry
• /
• v.66
• /
• pp.289-298
• /
• 2023

Stored rice grain undergoes physical and chemical deteriorations over time. As temperature and moisture content are important factors affecting to the denaturation of rice, it is important to store rice at a low temperature and hermetic condition. From a microscopic point of view, many studies have already reported how proteins and lipids were denatured within rice grain. Meanwhile, the weight loss of rice is currently observed at actual storage sites and can occur for diverse reasons. In this study, it was assumed that the decomposition process of polysaccharides, known as the main component of rice, plays an important role in its weight loss. In specific, the roles of enzymes were also evaluated. Our interest is in the major polysaccharides within a rice grain such as starch as well as within a rice endosperm cell wall. It is suspected that the weight loss of rice grains during storage seems to associate with the degradation of amylose and amylopectin. Nevertheless, it should be also speculated the correlating effect of other components such as proteins and lipids.

• Journal of the Korean Society of Food Culture
• /
• v.12 no.4
• /
• pp.419-421
• /
• 1997

Washing water volume of rice for cooking and rice weight for one person per meal in one household were surveyed for confirming pollution by the washing water and total losses by rice washing procedures. The mean size of a family was 4.64 persons and the mean consumption weight of rice per capital per meal was 138.43g. It is used 0.782 L of water for washing the rice per capital share. The washing water of rice was composed of 0.32% of total solid, 0.11% of soluble solid and 1.65% of solid loss to rice, and COD and BOD of it were 2.400 and 3.564 ppm respectively. Based on total population in Korea, 41 miliion, excepting age below 4, total cost for washing water of rice summed up about 1,495 billion won including 8.8 billion won for tap water cost, 11.7 billion won for waste water treatment, and 129 billion for solid loss of rice.

• Food Science and Preservation
• /
• v.8 no.2
• /
• pp.181-186
• /
• 2001

The objective of this study is to determine the effect of soy protein isolate (SPI) film coating on the color, firmness, viscosity and weight loss of Rice Cake stored at 15, 20 and $25^{\circ}C$ (RH 50%) for 30 days. Raw materials mixed with SPI and cocoa powder (10:0, 7:3, 5:5, 3:7, w/w) were prepared. After adding sugar and shortening to raw materials, the mixture were refined to 25 micron of particle size. Coating of Rice Cake were carried out at $65^{\circ}C$. SPI coated Rice Cake had higher internal and external firmness comparing to the control at $25^{\circ}C$. SPI coated Rice Cake showed smooth surface morphology and had 0.71-1.01 mm of thickness. SPI coated Rice Cake showed less weight loss for 30 days compared to controls. SPI coating solution was successfully coated on Rice Cake and extended shelf-life over 15 days at room temperature.

• Journal of Biosystems Engineering
• /
• v.27 no.5
• /
• pp.381-390
• /
• 2002

Direct seeding of rice-seed pellets is expected to be an alternative for solving problems in current direct seeding cultivation of rice. but mass production of rice-seed pellets is prerequisite for practical application. Design. construction and performance evaluation of an experimental rice seed pelleting machine were carried out for mass production of rice-seed pellets. The pelleting machine intended to make a ball type rice-seed pellet, which have 3∼5 rice seeds and diameter of which is 12 mm. Pellet materials ; rice seeds, soil, and binder were mixed and kneaded by the mixer. The designed rice seed pelleting machine fed pellet materials by screw conveyor to forming rolls and made rice-seed pellets. Capacity, ratio of perfect rice-seed pellets, seed and pellet material loss were investigated as mixing ratio of soil to rice seed and feeding rate of pellet materials. The pelleting machine showed up to 37,000 pellets/h of pelleting rate, 61∼71% of weight ratio of perfect rice-seed pellets to pellet materials supplied, 17∼48% of seed loss ratio. Average weight and average diameter of the pellets were 1.66 g and 12.0 mm. respectively. More than 3 rice seeds were included in most pellets at 6 : 1 of mixing ratio of soil to rice seed. And compression strength of the pellets was in the range of 88-130 N. To improve performance of the pelleting machine, improvements of the forming rolls, feeding mechanism, and discharging mechanism for reducing loss of pellet materials and seeds damage are needed.

• Korean Journal of Food Science and Technology
• /
• v.16 no.1
• /
• pp.113-119
• /
• 1984

Initial moisture content and weight of the rice bran and treatment time were identified as important variables for the inactivation of lipase and peroxidase present in rice bran. Multiple regression analysis was used to obtain a prediction equation to measure the effects of moisture content and weight of the sample and microwave treatment time on the residual lipase activity and loss in weight. It was found that the microwave treatment did not affect acid value and extractability of the rice bran oil.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.3 s.131
• /
• pp.30-37
• /
• 2005

This study aimed at offering basic data to develop a new use of sawdust and rice husk. Research investigated the variation of density, weight loss and dimensional decreasing rate by the percentage of resin impregnation and carbonization temperature of ceramics, which were formed by the percentage of resin impregnation of 40~80% and carbonization of $600{\sim}1200^{\circ}C$ with board impregnated with phenolic resin made from sawdust and rice husk. The results of this study were as follows:1) As the percentage of resin impregnation increased, the thickness shrinkage and weight loss were decreased; on the other hand, density and modulus of rupture increased. Meanwhile, the carbonization temperature at $1200^{\circ}C$ showed the highest values, as the density was $0.81g/cm^3$ and the bending strength was $77.9kgf/cm^2$ in the percentage of resin impregnation at 70%. 2) As the carbonization temperature grew higher the linear shrinkage, thickness shrinkage and weight loss increased while the density increased until the carbonization temperature of $1000^{\circ}C$; but then decreased slightly at $1200^{\circ}C$.

• Korean journal of food and cookery science
• /
• v.29 no.1
• /
• pp.47-52
• /
• 2013

The effects of added brown rice flour on the quality characteristic of waffle were investigated. Waffle were prepared by the addition of 0%, 25%, 50%, 75% and 100% of brown rice flour on wheat flour. The weight of waffle with brown rice flour ranged from 103.0~107.0 g and that of the control was 100.0 g. The volume of the waffle prepared by adding brown rice flour were 225.0~303.0 mL and that of the control was 307.5 mL. The weight of the waffle increased with increasing brown rice flour concentration, whereas volume and baking loss decreased. The hardness, chewiness (p<0.05) and springiness decreased with the addition of brown rice flour. The Hunter L values of waffle decreased, whereas a and b values increased with the addition of brown rice flour. The result of the sensory evaluation showed that taste and overall acceptability (p<0.05) was the highest for added brown rice flour.

• Journal of Biosystems Engineering
• /
• v.23 no.1
• /
• pp.13-20
• /
• 1998

Carbonized rice husk(char from rice husk) can be used to improve soils for planting, seedlings, horiculture, pomiculture and truck gardening. Although it is not a fertilizer in nature, it stimulates the growth of plants. Carbonized rice husk is highly recommended for raising soil/water temperature, keeping moisture and aerating roots of plants. The objective of this study was to develop the effective production method of carbonized rice husks by a non-slagging vertical cyclone combustor. A cyclone combustor w vortex collecor Pocket in addition to central collector pocket was selected and tested. Isothermal tests and mixed firing with LPG and rice husk were performed in order to characterize the system. hut rice husk was used during the isothermal test to find the mass collected of rice husk. It was impossible to ignite rice husk itself over the experimental conditions considered in this experiment. The composition of original and carbonized rice husks was analyzed by the ultimate analysis. With the air flow rate of 20 ㎥/h, LPG flow rate of 0.45 1/min, the required carbonized rice husk could be obtained.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1442-1455
• /
• 2018

The objective of this study was to examinate the differences of general component, chromaticity, pH, weight, loss on baking, specific volume bulk, diameter of upper side and height, mechanical texture, DPPH radical, ABTS radical, Total amount of phenol, Monacolin-K content, sensory test on Muffin using no Red Yeast Rice and different levels (2%, 4%, 6%, 8%, 10%) of Red Yeast Rice. pH was decreased as the amount of added Red Yeast Rice increased(control 8.35, RM2% 7.93, RM4% 7.86, RM6% 7.69, RM8% 7.49, RM10% 7.30). Weight and loss on baking were showed not too different depending the amount of added Red Yeast Rice, and the baking loss were at very low point. Adhesion, cohesiveness, elasticity, viscosity, and chewiness showed no attentive differences on mechanical texture analysis. As the level of Red Yeast Rice increased, DPPH radical, ABTS radical, and Total phenol content decreased. Monacolin K were at higher point as the level of Red Yeast Rice increased. The sensory test showed Taste, Texture, and Overall acceptability gained the highest point when using 4% of Red Yeast Rice. On the sensory test, 4% of Red Yeast Rice was considered to be the best level based on Flavor and Color. The results of these tests show 4% of Red Yeast Rice is most preferred and considered to be most suited with flour and rice flour.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.2
• /
• pp.120-130
• /
• 2018

Improvement in rice grain yield has been approached by means of genetic amendment, cultural management, and environmental adaptation. Subjecting the plant during the grain filling period to an appropriate environment plays a key role in achieving a high grain yield in temperate rice. Field experiments were conducted for two consecutive years with two planting times to assess the relations among grain filling traits, loss of leaf activity during the ripening period, and the grain yield of temperate japonica rice with wide environmental variation. Higher grain yields were attained in 2017 than in 2016 and with late planting than with early planting. The high grain yield accompanied a comparatively lesser increase in grain weight at the early filling stage but more gain in grain weight occurred during the late filling stage. Final grain weight correlated positively with grain filling duration but negatively with grain filling rate. Extended grain filling duration was associated with higher cumulative temperature and cumulative solar radiation for an effective grain filling period. The reduction in SPAD value ${\times}$ leaf dry weight from heading to harvest significantly correlated with final grain dry weight in a positive manner. No significant relation was found between grain filling duration and the decrease in SPAD value ${\times}$ leaf dry weight during the grain filling period. The results suggest that grain filling duration and loss of leaf activity during ripening independently contribute to environmentally induced yield improvement in temperate japonica rice.