• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1998.12a
• /
• pp.69-75
• /
• 1998

• Korean Journal of Agricultural Science
• /
• v.4 no.1
• /
• pp.94-104
• /
• 1977

In order to investigate the effects of mechanical transplanting on the rice, four rice varieties including Jo-saing Tongil were planted in case nursering bed for three times with 10 days interval beginning from April 16. Fourty days old seedlings were transplanted with rice-transplanter, and growth habits of seedlings in bed and rice plants in main field and yield were examined and summerized as follows: 1. The plant height and number of leaves of the 40 days old seedling in case nursery bed were appeared to be less than those of seedlings grown in ordinary nursery bed. In case nursery, the plant height and number of leaves of seedlings grown in case nursery were apparently higher than those of seedlings grown in upland case nursery. 2. The root of 40 days old seedlings were cut to investigate the rooting ability of seedlings, and the rooting ability of the seedlings grown in the case nursery bed were apparently lower in the rooting ability compared with the seedlings grown in ordinary nursery bed. The rooting ability of the seedlings grown in the lowland case nursery was higher than that of the seedlings grown in the upland case nursery. 3. The tip of leaves of the varieties derived from Indica type were becoming yellow and yellow-red in color 25 to 30 days after planted in the case nursery bed. Those varieties was almost stopped growth. 4. The seedlings transplanted by transplanter had shown more than five to seven days of delay in rooting, compared with the seedlings transplanted by ordinary method. The heading dates was delayed five to seven days when transplanter was used, even though the delay of heading dates was a little different depending on the varieties. 5. The yields of unhulled rice were a little lower than that of Yusin variety which was hand planted. When mechanically transplanted, the yield of Tongil variety was highest in the plot where seedlings were transplanted on May 26. When transplanted on June 15, Milyang#15 was highest in yield, indicating the importance of varietal selection in mechanical transplantation. 6. The rice transplanter could transplant from 73 to 108 seedlings per $3.3m^2$. If the seeds of rice were evenly planted in the bed, the two-row rice transplanter could be used five to six times more effectively with less than one percent of missing plant compared with the hand transplanting. This suggests that rice transplanter could be utilized in the mono cropping area. 7. Since the time of transplantings in the double-cropping area is rather limitted, mechanical transplantation might be possible without reducings yield providing better adapted varieties and improved case-nursery techniques.

• Journal of Biosystems Engineering
• /
• v.4 no.1
• /
• pp.48-57
• /
• 1979

In order to obtain a standard reference for designing an adequate power rice transplanter, the cutting forces depending upon variety of seedling, sowing density, seedling age and soil moisture content of mat-type seedling were measured by the rice transplanter installed with force measuring device of dynamic strain gage system in the laboratory. The result of this study are summarized as follows : 1. Cutting velocity and acceleration transplanting hoe obtained from jinematic analysis of planting mechanism was 1.32m/sec and 81.5m/$sec^2$ when planting crank-shaft rpm was 160. 2. Little difference between cutting forces on 30-days old seelings of japonica and Indica type was observed, as the cutting forces determined were 2.0kg per hill for Japonica type and 2.1kg per hill for Indica type. 3. Cutting forces determined on 40-days old seedlings were 2.5kg, 2.3kg, 3.1kg and 2.9kg per hill for Milyang No.15, Tongil, Akibare and Milyang No.23 compared to the other varieties. 4. The cutting force was not greatly affected by the sowing densities , only five percent of differences were observed epending upon the sowing densities. 5. Cutting forces were 2.7kg and 2.0kg per hill on 40-days old seedlings and 30-days old seedlings respectively. About 38 percent of more forces was required in cutting 40-days old seedling than in cutting 30-days old seedlings. 6. More cutting forces were required as soil moisture content of mat-type seedling was decreased. 7. Root length after cutting by the planting hoe and their relationships with soil moisture content on 30-days old seedlings, are as follows ; $y=4.147-11.384x+ 28.854x^2$ where , $y$=root length after cutting. (cm) , $x$=soil ture content of mat type seedlings.(%, d.b.) 8. Cutting forces were varied with the width of cuttings ; those on 40-days old mat type seedlings were 2.7kg and 2.2kg per hill when cutting with 14 mm and 10mm of width respectively, about 32 percent of more forces was required when cuting with 14mm of width compared to 10mm of width.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.12 s.177
• /
• pp.108-116
• /
• 2005

Transplanting accuracy of a rice transplanter mainly depends on the trajectory of the hoe for picking, conveying and transplanting of seedlings as well as the return motion. The trajectory can be decided and prescribed to be suitable in treating seedlings fur a prevailing soil condition. For the purpose of the transplanting accuracy, the design of a transplanting mechanism would be carried out using a planetary-gear-train system instead of the four bar linkage system. In this study, a design method of transplanting mechanism is theoretically proposed by synthesizing a noncircular planetary-gear-train system fur the tool (hoe) to trace a prescribed trajectory. The method utilizes an optimization approach to decide the lengths of an arm and a tool, the inverse kinematics to figure out the configuration angles of the two links, the roll contact condition in transmitting motion between the gears, and a linearization approach to obtain the shapes of the gears. Based on the proposed method, the shapes of the gears and the lengths of the tools of the planetary-gear-train system are determined fur three prescribed trajectories. A kinematical simulation with a commercialized package program is also carried out to confirm that the gear-train system synthesized with the proposed method is able to trace the prescribed trajectory.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1989.02a
• /
• pp.44-45
• /
• 1989

• Journal of Practical Agriculture & Fisheries Research
• /
• v.3 no.1
• /
• pp.142-157
• /
• 2001

This study was conducted to get the basic information for promoting farm machinery productivity by surveying the regular maintenance and repair status of major farm machinery such as power tiller, farm tractor, rice transplanter and combine harvester. The survey was carried out through 9 provinces including Cheju province by direct visiting farmers with prepared questionnaire. The results of this study can be summarized as follows : 1. The average farming carrier of the surveyed farmers was 25.3 years, and 21-30 years of farming carrier showed the highest portion as 40.7%. The average carrier of using farm machinery was 9.4 years, and that was 14.9 years for power tiller, 8.3 years for farm tractor, 9.0 years for rice transplanter, 7.9 years for combine harvester, 7.5 years for mini tiller, 9.7 years for power sprayer, and 8.2 years for binder etc. 2. The regular maintenance for farm machinery was conducted mainly at repair shop (49.5%) or dealer agency (12.0%) as 61.5%, and 34.9% of farmers conducted the regular maintenance by themselves at their house. 3. The reasons for not-fully recognizing operation manual and insufficient before-, during-, after-maintenance of farm machinery were insufficient time for them (45.8%), troublesome (22.9%), unknown maintenance method (16.3%), unknown the necessity for maintenance (12.4%), and others (2.6%) in order. 4. For the annual exchange of engine oil, 3.2 times is necessary but actually 1.7 times was exchanged for power tiller, 4.3 times is necessary but actually 1.9 times was exchanged for farm tractor, 2.7 times is necessary but actually 1.7 times was exchanged for rice transplanter, 2.2 times is necessary but actually 2.3 times was exchanged combine harvester. 5. For the annual cleanness or exchange of fuel filter, 3.2 times is necessary but actually 1.1 times was done for power tiller, 4.3 times is necessary but actually 1.6 times was done for farm tractor, 2.7 times is necessary but actually 1.7 times was done for rice transplanter, 1.9 times is necessary but actually 0.8 times was done for combine harvester. 6. For the annual cleanness or exchange of air filter, 3.2 times is necessary but actually 1.4 times was done for power tiller, 4.2 times is necessary but actually 2.4 times was done for farm tractor, 2.6 times is necessary but actually 1.6 times was done for rice transplanter, 3.9 times is necessary but actually 7.0 times was done for combine harvester. 7. For the experience of breakdown related to maintenance, 5.3% of farmers experienced breakdown due to the insufficient exchange of engine oil, 7.7% of farmers experienced breakdown due to the insufficient cleanness or exchange of fuel filter, and 2.9% of farmers experienced breakdown due to the insufficient cleanness or exchange of air filter. 8. Most farmers (76.1%) recognized the necessity for agricultural machinery training or education, and most farmers preferred about one week for the training period, simple or ease maintenance for the training level, agricultural technical center or agricultural machinery manufacturer for the training agency. 9. Complete recognition of operation manual and sufficient before-, during-, and after-maintenance for farm machinery can minimize the breakdown as well as conduct suitable period farming, enlarge the endurance, prevent the safety accidents, and promote productivity of farm machinery. Therefore, these can be accomplished by the thorough training or education for agricultural machinery.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.3 no.1
• /
• pp.30-47
• /
• 2001

This research was performed to develope a stable direct seeding method in rice cultivation using by a direct seeder with soil application. A principle of this methodology was introduced from seeding nursery system of machine transplanting enable to increase high seeding establishment direct seeding method with soil application was high of 89-95% while that of water seeding was 68%. During seeding growth plant height was ralatively small but seeding health was high. A total soil consumption of this methodology was 145kg/10a in dirll seeding and 26kg/10a in hill seeding respectively, there was 100% erected in direct seeding with soil application while water seeding was 45% in erected seeding stand. In direct seeding method with soil application total carbohydrate content was higher than that of water seeding. This machine was manufactured to attach and/or detach to a machine transplanter with riding type and machine cultivator with multipurpose. In the farmer's demonstrated rice field this method was well performed like machine transplanting in terms of rice growth and development. There was highly cost reduction for rice production like other direct seeding methods.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.02a
• /
• pp.238-243
• /
• 2003

쌀은 전 세계에서 매년 약 4억 톤이 생산되어 세계인구의 약 45%에게 주식으로 제공되고 있다. 우리나라에서는 쌀 농사가 농업소득의 약 44%를 차지하는 농가의 주 소득원으로 경제적 비중이 크다. 또한 WTO 개방경제 체제에서는 쌀 생산농가가 생존하기 위해서는 생산비 절감을 통한 가격경쟁력 제고와 품질향상을 통한 소비자 선호도 확보가 가장 중요한 과제이다. 지금까지 우리나라의 벼농사는 생산비 절감이나 품질향상보다는 수량증대에 치중하여 쌀 산업의 국제경쟁력은 매우 취약한 실정이다. (중략)

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1988.02a
• /
• pp.32-33
• /
• 1988

• Journal of Biosystems Engineering
• /
• v.10 no.2
• /
• pp.27-35
• /
• 1985

This study was carried out to determine the optimum size and number of farm machines for various sizes of land coverage of the cooperative farm machinery utilization systems in Korea-namely Saemaul Mechanized Farming Group (SMFG). Fifty-one SMFG were selected from 8 counties in Chonnam province, and ownership, operation and management of farm machinery were surveyed. Annual covered area, cost and the break-even-point area of farm machinery were analyzed on the bases of the surveyed data and the present governmental subsidy policy, and then the optimum level of farm machinery ownership was determined. The results are summarized as follows: 1. The break-even-point areas of the tractors of 22-23ps, 28ps and 47-50ps were estimated as 12.1ha, 15.3ha and 21.6ha, respectively. The optimum size of a tractor for land sizes of 10-20ha, 20-30ha, and 30-40ha were estimated as 22-23ps, 28ps, and 47-50ps, respectively. 2. The break-even-point area of a rice transplanter was estimated as 3.3ha. The optimum numbers of rice transplanter for land sizes of 10-20ha, 20-30ha, and 30-40ha were estimated as 2,3, and 4, respectively. 3. The break-even-point areas of a speed sprayer (attached on power tiller) and a power sprayer were estimated as 114.6ha and 15.3ha, respectively. The optimum numbers of power sprayer for land sizes of 10-20ha, 20-30ha, and 30-40ha were estimated as 2,3 and 4, respectively. A speed sprayer is desirable for an area of more than 30ha coverage. 4. The break-even-point area of a combine was estimated as 10.7ha. The optimum numbers of combine for land sizes of 10-20ha, 20-30ha, and 30-40ha were estimated as 1,2, and 3, respectively.