• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2002.10a
• /
• pp.193-196
• /
• 2002

This study is performed to examine physical and mechanical properties or neutralization treatment point and curing methods of ECO-cencrete using rice straw ash. Tests for void ratio, compressive and bending strength with neutralization treatment point and curing methods are performed. The test result shows that the void ratio is decreased with increasing content of rice straw ash. But, the compressive and bending strength is increased with increasing content of rice straw ash. The greatest strength is appeared when neutralization is treated at the curing age of 6 days.

• The Research Journal of the Costume Culture
• /
• v.12 no.5
• /
• pp.781-791
• /
• 2004

Currently, as mordants, heavy metals are being used in dyeing process in order to improve dye uptake and dye fastness. These chemicals, however, are mostly harmful to human body and the environment along with the pollution by effluent. Traditionally, rice straw ash solution, lime, etc. have been used as mordants in order to improve the effects on dye uptake and color fastness of dyestuffs. The study of natural mordants would, therefore, be vital to the development and succession of our traditional dyeing methods. In this study, as a preliminary step toward the use of rice straw ash solution for the nautral dyeing using Caesalpinia sappan, several aluminum compounds were employed as mordants. When the purified aluminum compounds were used, on the basis of unmordanted cotton fabric, the K/S values of the pre-mordanted and simultaneously mordanted fabrics increased by 2 or 3 times, while those of the post-mordanted fabrics decreased.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.53 no.2
• /
• pp.61-65
• /
• 2011

Biomass is considered to be a major potential fuel and renewable resource for the future. In fact, there is high potential to produce the large amount of energy from biomass around the world. In this study, to obtain basic data for practical application of agricultural and forest by-products as fuel of heating system in agriculture, agricultural and forest biomass resources were surveyed, the pelletizer with capacity of $50\;kg{\cdot}h^{-1}$ was designed and manufactured and pellets were made by the pelletizer. High heating value, ash content, etc. of pellets made of agricultural and forest by-products were estimated. Straw of rice was the largest agricultural biomass in 2009 and the total amount of rice straw converted into energy of $299{\times}10^3$ TOE. And in 2009, amount of forest by-product converted into energy of $9,579{\times}10^3$ TOE. High heating values of pellets made of stem and seed of rape, stem of oat, rice straw and rice husk were 16,034, 16,026, 16,089, 15,650, $15,044\;kJ{\cdot}kg^{-1}$ respectively. High heating values of pellets made of agricultural by-products were average 83.6% compared to that of wood pellet. Average bulk density of pellets made of stem and seed of rape, stem of oat, rice straw and rice husk was $1,400\;kg{\cdot}m^{-3}$ ($1.4\;g{\cdot}cm^{-3}$). Ash contents of the pellets were 6.6, 7, 6.2, 5.5, 33% respectively. Rice husk pellet produced the largest ash content compared to other kinds of pellets.

• Journal of the Korean Ceramic Society
• /
• v.43 no.7 s.290
• /
• pp.393-401
• /
• 2006

The development of Korean glaze originated from the development of ash glazes. Ash not only has strong solubility but also can shows the glaze a variety of different colors according to what the glaze has in it as the main component. In addition, it gives a feeling of lucidness and softness. For these reasons, there are a lot of needs for ash and many potters want to take advantage of ashes as glaze. But natural ashes have not been widely used as glaze primarily because it is relatively hard to find or manufacture. Considering the difficulty of finding or manufacturing natural ashes, this study aims to formulate synthetic ash which not only is available to the potters in general but also has the sam ε characteristics as the natural ashes. To achieve this aim, this study examines the characteristics of the pine tree ash, the main component of the glaze of celadon porcelains, and the red pepper stem ash, the main component of the brown glaze, both of which have been used by the Korean traditional potters. In this study, the alkaline component of the glaze. A important ingredient when the ashes are synthesized, was supplied by mixing of $Na_2CO_3$, Chungju limestone and rice straw ash. Furthermore, the synthetic ash, when it shows no change of pH in its composition rate of 6:2:2, was found to be usable as the most stable material. In conclusion, the formula which frits some raw $materials-Na_2CO_3$, Chungju limestone and rice straw ash-can duplicate the synthetic ash which is simila to the natural ash.

• Journal of the Korean Home Economics Association
• /
• v.43 no.8 s.210
• /
• pp.1-12
• /
• 2005

Ash solutions derived from vegetation have been known for their good mordanting action. They are used as finishing agents because they are able to promote dye uptake. It is expected that the types of ash solutions may have been different worker by worker since the workers have employed easy-to-get plants, when we reviewed old literature. However, the ash solutions are being used without clear distinctions between their characteristics. In this study, camellia ash solution and rice straw ash solution were prepared according to traditional methods. Using these solutions as mordanting agents, natural dyeing experiments with Caesdpinia Sappan were peformed. Following the dyeing procedure, the effect of the type of ash solution on the color of the dyed fabric was evaluated. The results showed that the ash solution mordanting effect us not dependent upon the components of the ash solution. It was also demonstrated that the mordanting effect was not based on the action of the metallic ions in the ash solution. The pH values of the ash solutions were adjusted in order to investigate the effect of changes in ash solution alkalinity on the dyeing process. The pH values ranged from neutral or weak acidity to the alkaline range in order to evaluate the characteristics of the mordanting tv the ash solutions.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.1
• /
• pp.48-53
• /
• 2005

Finger millet straw and rice straw are the major source of dry roughage in southern India. They distinctly vary in their morphological and nutritional characters. Hence an effort was made to study the nutrient utilization, milk yield and composition in crossbred dairy cows fed either finger millet (group 1) or rice straw (group 2) as a source of dry roughage. The cows in both the groups were fed as per requirement with concentrate, green fodder and straw in the ratio of 30:45:25 parts (DM). At the end of 50 days of preliminary feeding a digestibility trial was conducted for 7 days and pooled samples of feed, fodder, feces, urine and milk were analysed for macro and micro nutrient content. Finger millet straw contained more CP, Ca, P, Mg, Cu, Zn and Co than rice straw and rice straw contained higher ADF, ash and silica. The intake of DM, CP, EE, NDF, ADF and most micronutrients (Ca, P, Mg, Cu, Zn, Fe, Mn and Co) was significantly higher in cows fed finger millet straw. The digestibility of DM, CP, NDF and ADF was significantly higher in cows fed finger millet straw and the gut absorption of Ca, Cu, Mn and Co was significantly higher in cows fed finger millet straw. The dietary requirement of all micronutrients in both the group of cows could be met irrespective of the type of roughage fed except that of Ca, which was low (0.61 and 0.40%) in rice straw fed cows. The average daily milk yield (L/cow) was also higher (7.0 L) in cows fed finger millet straw as compared to cows fed rice straw (6.3 L). The average milk composition also did not differ except that of milk fat which was significantly (4.7 and 4.5%) low in cows fed rice straw. The overall results of this study have indicated that finger millet straw is a better source of dry fodder than rice straw and while feeding rice straw as the sole roughage to dairy cows there is need to supplement additional calcium as this could be one of the limiting nutrients for milk production.

• Journal of the Korea Concrete Institute
• /
• v.16 no.3 s.81
• /
• pp.311-318
• /
• 2004

This study was performed to examine engineering properties for planting of porous concrete block containing rice straw ash. Tests for void ratio, compressive and flexural strength, pH by neutralization treatment time and curing method were peformed. As results, the void ratio tends to decrease with increasing rice straw ash content. But, the compressive and flexural strength tends to increase with Increasing rice straw ash content. When the neutralization was treated at the curing age 6 days, the greatest strength was showed. The pH of porous concrete without neutralization treatment in dry and water curing are shown in 10.32 ${\~}$ 10.55 and 9.41${\~}$9.59, respectively. The pH of porous concrete by neutralization treatment in dry and water curing were shown in 9.74${\~}$10.10 and 8.13${\~}$9.32, respectively. The porous concrete block size was 23 ${\times}$ 23 ${\times}$ 4 cm, and species of planting were Tall fescue, Lespedeza cyrtobotrya and Lespedeza cuneata. At the 6 months after seeding, germination ratio and grown-up length of Tall fescue, Lespedeza cyrtobotrya and Lespedeza cuneata were shown in 90, 60, $50\%$, and 40${\~}$50, 90${\~}$110, 65${\~}$75 cm, respectively. These porous concrete block containing rice straw ash could be used for planting.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.11
• /
• pp.1465-1474
• /
• 2005

The primary purpose of this study is to investigate the differences in the characteristics of the mordants, synthetic aluminum mordants and ash solutions as natural mordants, used in Caesalpinia sappan dyeing. By introducing aluminum potassium sulfate in the ash solutions, the behavior of the aluminum in the ash solutions were observed. In the rice straw ash solutions, adjusted to the levels of pH6 and pH10, the aluminum potassium sulfate was introduced to achieve various concentration levels. From the analysis of the ash solution of pull, $K^+$ and $Na^+$ ion concentrations were found to be extremely high, while $Al^+$ ion concentration was 0. The color development in the Caesalpinia sappan dyeing by ash solution mordanting was found to be mainly governed not by the mordanting actions of the metallic ions but by those of alkali components. In the case of cotton, the application of pH10 ash solution promoted reddish color development compared to the case of non-mordanting, regardless of the aluminum potassium sulfate addition. In the case of silk, the application of pH10 ash solution increased a* value and decreased b* value compared to the case of non-mordanting.

• Journal of Environmental Health Sciences
• /
• v.21 no.1
• /
• pp.56-67
• /
• 1995

This study was carried out to observe how composting reaction proceed in the optimum composting condition and to understand the characteristics of final compost, when swine feces was amended with different bulking material. Sawdust, rice straw, and rice hull were selected as bulking materials and each of these was mixed with swine feces to obtain the optimum range of moisture contents and C:N ratio. To grasp the influence of newspaper on cornposting reaction when it flew into the composting site intentionally or accidentally, another composting reaction using newspaper as a bulking material was studied. In this experiment, raw material mixes containing the same amount of organic materials were put into 4 composting reactors and composted in the same environmental condition for 3 weeks from Aug. 1, 1994 to Aug. 22, 1994. The followings are the main results of this study. 1. The maximum temperatures reached at during cornposting reaction were 53.8$\circ$C, 51.9$\circ$C, 52.7$\circ$C, and 52.1$\circ$C in the reactor using sawdust, rice straw, rice hull, and newspaper as a bulking material respectively: Thermophilic temperatures were maintained for 72, 108, 108, and 111 hours in each reactor. Mean temperatures of reactors using sawdust, rice straw, rice hull, or newspaper as a bulking materials were 39.7$\circ$C, 39.5$\circ$C, 41.3$\circ$C, and 40.3$\circ$C, but no significant difference between these mean temperatures was observed(p>0.05). Each composter showed significant difference from room temperature(p<0.01), and the mean difference between them was 9.4$\circ$C. 2. Ash contents of each reactor increased rapidly in order of rice straw, rice hull, newspaper, and sawdust according to the pattern of second order function. This rate of increase seemed to result from structural characteristics of a bulking material. The absolute values of second order coefficient of these regression functions were 0.0199, 0.0159, 0.0157, and 0.0144 in each reactor using rice straw, rice hull, newspaper, or sawdust as a bulking material. 3. C:N ratio decreased as the reaction proceeded. Degree of decrease was in order of rice straw, rice hull, newspaper, and sawdust. This sequence was consistent with the increase rate of ash content. The ratios of initial C:N ratio to final C:N ratio were 0.45, 0.53, 0.64, and 0.75 in each reactor using rice straw, rice hull, newspaper, and sawdust as a bulking material respectively. From this ratios, it was possible to infer that all the composting reactions were completed. 4. Fertilizer content containing in the final compost was 1.61~2.20% of N, and 0.35~0.54% of P in dry weight base. According to the classification standard for compost constituent by Higgins, all composts had the intermediate grade of N, but below the low grade of P excepting the newspaper amended compost(fall into the range of the low grade). 5. Heavy metal contents contained in the composts were analyzed. In case of Cd, the range of 0.58~1.11 $\mu$g/g was observed, and in case of Pb, the range of 24.76~39.53 $\mu$g/g was observed(in wet weight base). These values are below the permissible heavy metal level for compost of foreign countries.

• The Research Journal of the Costume Culture
• /
• v.12 no.6 s.53
• /
• pp.908-917
• /
• 2004

In the previous article, the effect of aluminum compounds on the mordanting of the Caesalpinia sappan L. dyeing was studied. According to the type of the compound, the effect on the dyeing was found to be different even if $Al^{3+}$ ion was present in the molecular structure of the compound. It was postulated that there would be complex effects other than the effects based on the purified Al compounds only, since there are some amount of compounds hard to neglect. In order to reproduce the traditional dyeing practice, rice straw ash solutions were prepared as mordanting agents. The pH values of the solution baths were 4, 5, 6, 9, and 11 in order to investigate the pH effect on the color development by adding appropriate amount of Schizandra chinensis extract solution. The inherent dyeing properties were evaluated by the analysis of color difference, air permeability, the characteristics developed by pre-mordanting, post-mordanting, or simultaneous mordanting methods.