• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.6
• /
• pp.734-743
• /
• 1999

The local Nusselt numbers have been measured for a round turbulent jet impinging on the concave surface with and without rib. Liquid crystal/transient method was used to determine the Nusselt number distributions along the surface. The temperature on the surface was measured using liquid crystal and a digital color image processing system. The experiments were made for the jet Reynolds number (Re) 23,000, the dimensionless nozzle-to-surface distance (L/d) from 4 to 10, the dimensionless surface curvature (d/D) 0.056, and the rib type (height ($d_1$) 0.2 cm, pitch (p) from 1.2 to 3.2 cm). It was founded that only when $L/d{\geq}6$, the average Nusselt numbers on the concave surface with rib are higher than those without rib, mainly due to an increase in the turbulent intensity caused by the effect of rib attached to the wall surface. It was realized that the rib attached to the concave surface may no longer enhance the heat transfer rate or even lowers it depending on the rib type and flow conditions. In addition, the results by the steady-state method using the gold-film Intrex were in good agreement with those by the transient shroud method.

• Journal of IKEEE
• /
• v.7 no.1 s.12
• /
• pp.16-21
• /
• 2003

A rigorous modal transmission-line theory (MTLT) based on effective dielectric method (EDM) is introduced and developed to analyze the polarization beam-splitting of optical rib-type directional coupler with three guiding layers. Furthermore, to confirm the validity of approach proposed in this paper, we compare our results with those ones of BeamPROP, which is a commercial software package used widely. Consequently, the numerical results reveal that the hybrid modes incident into a guiding channel of rib-type coupler are split well through upper and lower guiding channels in a polarization length.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.5
• /
• pp.606-613
• /
• 2007

The 6m class high speed boat is developed with a durable hull and inflatable tube, which is called RIB(Rigid Inflatable Boat), for the purpose of marine leisure. In the stage of the conceptual design, its requirements to be optimized are determined based on the presented information of similar marine leisure RIBs. The 3-D graphical technique using Marine Rhino is utilized to optimize the compartment layout of RIB. The stability analysis is performed for the light and full load conditions with and without the inflatable tube. In addition, the sea keeping and hydrodynamic performance was tested using the proto-type ship in the sea condition. From the results of the computation and the sea trial test, it shows that the performance of the marine leisure RIB satisfies the speed, the convenience, and the stability requirements. This study provides the typical information of the design factors and the procedure to manufacture the marine leisure RIB.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.1
• /
• pp.8-14
• /
• 2011

RIB(Rigid Inflatable Boat) is widely used for coastal transportation in the commercial use and for ISR(Intelligence, Surveillance, Reconnaissance) in the military use. Since RIB is around 10 meters in length and over 30 knots in speed, its motion characteristics in waves is quite different from a large scale ship. When it turns, large roll occurs and heeling direction is opposite to the large ship's case. Currently, many countries are developing USV(Unmanned Surface Vehicle) of which type is RIB. In order to develop high performance autopilot and way point controller, it is very important to identify RIB's motion characteristics. In this paper, sea trial test results of a 7-meter RIB such as speed, turning, zig-zag, and way point control tests were represented and its resistance and propulsion model was identified by using sea trial data and Savitsky's formula. In addition, the state space model which will be used in the identification of the four-degree-of-freedom dynamics in the next step was formulated and the identification procedure was proposed.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.313-318
• /
• 2001

Compression molding is widely used process for the industrial forming of fiber reinforced plastic articles. Its applications are of an extreme variety and the products range from large parts, such as used in the automotive industry to much smaller objects. In this paper, distribution of fiber orientation by the image processing method for rib type compression molded products of each fiber content is measured. And the effects of fiber content, product size on the orientation state are discussed.

• Journal of Korean Society of Steel Construction
• /
• v.8 no.3 s.28
• /
• pp.13-20
• /
• 1996

With the adoption of welded joints rather than bolted joints, we investigate the fatigue strength and the fatigue crack initiation of U-type trough rib and welded specimen with misalignment in a steel deck plate. The stress concentration factor of welded specimens with a misalignment is also verified by a finite element method. The main conclusions obtained from this study are as follows Experimental results of full-scaled U-type trough rib models have indicated that fatigue life depends on misalignments of welded joints in steel deck plate ; The more misalignments are, the less the fatigue life is. It has also shown that fatigue crack propagates from the welded root to the bead surface. We have also obtained the same results from both the fatigue test of welded specimens with a misalignment and the stress analysis of a finite element method.

• Journal of Chest Surgery
• /
• v.46 no.2
• /
• pp.130-134
• /
• 2013

Background: Rib fractures are the most common type of thoracic trauma and cause other complications. We explored the risk factors for pneumonia in patients with multiple rib fractures. Materials and Methods: Four hundred and eighteen patients who visited our hospital with multiple rib fractures between January 2002 and December 2008 were retrospectively reviewed. Chest X-rays and chest computed tomography were used to identify injury severity. Patients with only a single rib fracture or who were transferred to another hospital within 2 days were excluded. Results: There were 327 male patients (78%), and the median age was 53 years. The etiologies of the patients' trauma included traffic accidents in 164 cases (39%), falls in 78 cases (19%), slipping and falling in 90 (22%), pedestrian accidents in 30 (7%), industrial accidents in 41 (10%), and assault in 15 (4%). The median number of rib fractures was 4.8. Pulmonary complications including flail chest (2.3%), lung contusion (22%), hemothorax (62%), pneumothorax (31%), and hemopneumothorax (20%) occurred. Chest tubes were inserted into the thoracic cavity in 216 cases (52%), and the median duration of chest tube insertion was 10.26 days. The Injury Severity Score (ISS) and rib score had a median of 15.27 and 6.9, respectively. Pneumonia occurred in 18 cases (4.3%). Of the total cases, 33% of the cases were managed in the intensive care unit (ICU), and the median duration of stay in the ICU was 7.74 days. Antibiotics were administered in 399 patients (95%) for a median of 10.53 days. Antibiotics were used for more than 6 days in 284 patients (68%). The factors affecting pneumonia in patients with multiple rib fractures in multivariate analysis included age (p=0.004), ISS (p<0.001), and rib score (p=0.038). The use of antibiotics was not associated with the occurrence of pneumonia (p=0.28). In-hospital mortality was 5.3% (n=22). Conclusion: The factors affecting risk of pneumonia in patients with multiple rib fractures included age (p=0.004), ISS (p<0.001), and rib score (p=0.038). Elderly patients with multiple traumas have a high risk of pneumonia and should be treated accordingly.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.241-247
• /
• 2001

A comparison of fully developed heat transfer and friction factor characteristics has been made in rectangular ducts with ones roughened by five different shapes. The effects of rib shape geometries and Reynolds number are examined. The rib height-to-duct hydraulic diameter, pitch-to-height ratio, and aspect ratio of channel width to height are fixed at e/De=0.0476, P/e=8, and W/H=2.33, respectively. To understand the mechanisms of the heat transfer enhancements, the measurements of the friction factors are also conducted in the smooth and rough channels. The data indicates that the triangular type rib has a substantially higher heat transfer performance than any other ones in the range we studied.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.5
• /
• pp.341-347
• /
• 2001

A comparison of fully developed heat transfer and friction factor characteristics has been made in rectangular ducts with ones roughened by five different shapes. The effects of rib shape geometries and Reynolds number are examined. The rib height-to-duct hydraulic diameter, pitch-to height ratio, and aspect ratio of channel width to height are fixed at $e$/De=0.0476, P/$e$=8, and W/H=2.33, respectively. To understand the mechanisms of the heat transfer enhancements, the measurements of the friction factors are also conducted in the smooth and rough channels. The data indicates that the triangular type rib has a substantially higher heat transfer performance than any other ones in the range we studied.

• Journal of Korea Water Resources Association
• /
• v.46 no.9
• /
• pp.947-956
• /
• 2013

Most of flood protection walls built on the impingement in mountain rivers have been made of concrete. It may cause flood disasters because the smooth wall surface could increase flow velocity. In this study the hydraulic experiments was carried out to evaluate the effect of one side wall with rectangular vertical ribs on flow resistance in open channel. The ratio of the pitch between vertical ribs to its depth, ${\lambda}_{nv}$, was designed so that it include the so-called d type and k type roughness. The range of Froude number, $F_r$, based on hydraulic radius is 0.81~1.12. Flow resistance in the open channel with a rib sidewall depends on the interval length of each ribs and the flow discharge. Maximum flow resistance occurred when ${\lambda}_{nv}$ is 9. In the d type roughness which ${\lambda}_{nv}$ is less than 3, the flow resistance decreases with increase of flow discharge. In the k type roughness which ${\lambda}_{nv}$ is greater than 3, the flow resistance increases with increase of flow discharge. The increments of flow resistance are especially great when ${\lambda}_{nv}$ are 9 and 12. The resistance due to vertical rib is mostly by the shape resistance and the vertical rib on one sidewall of open channel affects on the flow resistance so that the equivalent roughness heights of vertical rib may occur in scale of flow depth. Therefore the vertical ribs may be used to reduce the flow velocity and to move the location of maximum flow velocity from the rib sidewall to the centerward in a cross section of channels.