• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.2
• /
• pp.230-236
• /
• 2011

This paper proposes the possibility which the fuzzy theory can be used to improve the performance of the parabolic SAR(Stop-And-Reverse) indicator in the trading systems for stock market. The simulation results with data of the KOSPI 200 future show that the occurred number of trading signals and the false signals in the proposed fuzzy SAR indicator is less than that in the conventional SAR indicator. In the conventional SAR system, the incremental value of the acceleration factor is usually setted as 0.02 and the maximum value of the acceleration factor is usually limited as 0.2. But in the proposed fuzzy SAR system, the incremental value and the maximum value of the acceleration factor are automatically adjusted by using the fuzzy rules, which are designed based-on the difference between short-term moving average and medium-term moving average and also based-on the slope of short-term moving average.

• Journal of Mechanical Science and Technology
• /
• v.19 no.5
• /
• pp.1158-1168
• /
• 2005

A shunt from the left ventricle to the left anterior descending artery is being developed for coronary artery occlusive disease, in which the shunt or conduit connects the the left ventricle (LV) with the diseased artery directly at a point distal to the obstruction. To aid in assessing and optimizing its benefit, a computational model of the cardiovascular system was developed and used to explore various design conditions. Computational fluid dynamic analysis for the shunt hemodynamics was also done using a commercial finite element package. Simulation results indicate that in complete left anterior descending artery (LAD) occlusion, flow can be returned to approximately 65% of normal, if the conduit resistance is equal for forward and reverse flow. The net coronary flow can increase to 80% when the backflow resistance is infinite. The increases in flow rate produced by asymmetric flow resistance are enhanced considerably for a partial LAD obstruction, since the primary effect of resistance asymmetry is to prevent leakage back into the ventricle during diastole. Increased arterial compliance has little effect on net flow with a symmetric shunt, but considerably augments it when the resistance is asymmetric. The computational results suggest that an LV-LAD conduit will be beneficial when the resistance due to artery stenosis exceeds 27 PRU, if the resistance is symmetric. Fluid dynamic simulations for the shunt flow show that a recirculating region generated near the junction of the coronary artery with the bypass shunt. The secondary flow is induced at the cutting plane perpendicular to the axis direction and it is in the attenuated of coronary artery.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.5
• /
• pp.196-208
• /
• 2005

In multiprocessor systems, interconnection network design is critical for overall system performance. Popular interconnection networks, which are generally considered, are meshes, rings, and hierarchical rings. In this paper, we propose (')Torus Ring('), which is a modified version of hierarchical ring. Torus Ring has the same complexity as the hierarchical rings, but the only difference is the way it connects the local rings. It has an advantage over the hierarchical rings when the destination of a packet is the neighbor local ring in the reverse direction. Though the average number of hops in Torus Ring is equal to that of the hierarchical rings when assuming the uniform distribution of each transaction, the benefits of the number of hops are expected to be larger because of the spatial locality in the real environment of parallel programming. In the simulation results, latencies in the interconnection network are reduced by up to 19$\%$, and the execution times are reduced by up to 10$\%$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.957-966
• /
• 1998

In this paper an imrpoved Signal-to-Interference ratio(SIR)-based call admission control(CAC) algorithm for DS-CDMA cellular system is proposed and its performance is analyzed. This algorithm uses Residual-Capacity defined asthe additional number of initial calls that a base station can accept such that system-wide outage probability will guaranteed to remain below a certain level. the residual capcity at each cell is calculated according to the reverse-link SIR measured not only at the home cell but also the adjacent cells. Then the adjacent cell interference-coupling coefficient .betha. is used. In this work we propose an improved algorithm that .betha. varies according to the traffic load of the home cell. The influence of traffic condition on system performance, namely blocking probability and outage probability, is then examined via simulation. The performance of the improved algorithm is evaluated both under homogeneous and hot spot traffic loads. The results show that the improved algorithm outperforms conventional algorithms under all load values. Under over-load situation, especially, the improved algorithm gives almost constant outage performance the QoS(quality of service) can be guranted.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.7
• /
• pp.1677-1688
• /
• 1998

In this paper, we analyze the performance of a DS-CDMA system employing adaptive adaptive array antenna technology at base-station. For the analysis the receiving architecture of a multiple team adaptive base-station array antenna is proposed as a major system omponent, and signal to interference and noise ratio(SINR) on the proposed architecture is developed. We show that the perfomance enhancement of the CDMA system is represented as great reduction of interfreence by employing an array antenna capable of resolving the angular distribution of the mobile users as seen at the ase-station. The energy associated with each mobile or a group of mobiles is thus confined within the addressed volume, greatly reducing the amount of co-channel interference experienced from and by neighboring co-channel cells. In order to ascertain the benefits of such an antenna, a theoretical approach, which eis based on the conventional and proposed antenna systems in a typical mobile radio environment, is adopted. Finally computer simulation results show the insight into how the adaptive array antenna operates when used in conjunction with DS-CDMA and illustrate the potential benefits in the SINR point of view.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.1
• /
• pp.64-76
• /
• 2017

Routing in mobile ad hoc networks (MANETs) is highly challenging because of the dynamic nature of network topology. AntHocNet is a bio-inspired routing protocol for MANETs that mimics the foraging behavior of ants. However, unlike many other MANET routing protocols, the paths constructed in AntHocNet are unidirectional, which requires a separate path setup if a route in the reverse direction is also required. Because most communication sessions are bidirectional, this unidirectional path setup approach is often inefficient. Moreover, AntHocNet suffers from looping problems because of its property of multiple paths and stochastic data routing. In this paper, we propose a modified path setup procedure that constructs bidirectional paths. We also propose solutions to some of the looping problems in AntHocNet. Simulation results show that performance is significantly enhanced in terms of overhead, end-to-end delay, and delivery ratio when loops are prevented. Performance is further improved, in terms of overhead, when bidirectional paths setup is employed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.8
• /
• pp.1031-1039
• /
• 2018

If large-scale PV systems are continuously interconnected to distribution system, customer voltages could violate the allowable voltage limit($220{\pm}13V$) according to reverse power flow of PV system. In order to solve these problems, this paper proposes flexible adoption evaluation algorithm of PV system in distribution system which estimates proper introduction capacity and location of ESS(energy storage system) for keeping customer voltages within allowable voltage limit based on various operating scenarios related with connecting point and capacity of PV system. And also this paper proposes modeling of ESS, SVR(step voltage regulator) and PV system using PSCAD/EMTDC S/W and analyzes characteristics of customer voltages and the adoption ability of PV system in distribution system. From the simulation results, it is confirmed that proposed algorithm is useful for large-scale adoption of PV system in distribution system to maintain customer voltages within allowable voltage limit.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.4
• /
• pp.1-8
• /
• 2000

A defect of decrease in TCP throughput can be investigated in asymmetric environment of different uplink and downlink bandwidths. Under two-way TCP traffic, the total link utilization is decreased by the successive injection of data packets in buffer. To solve these problems, terminal ACK filtering and packet scheduling mechanisms are introduced in this paper. ACK filtering eliminates the buffered ACK packets and transmits recent ACK packets in the uplink with limited bandwidth. Packet scheduling is the method of preventing 'clustering' and 'ack compression' states which are generated in the two-way TCP traffic. The guarantee of the data traffic in reverse TCP connection and the high throughput in forward TCP connection are investigated by simulation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.12
• /
• pp.1315-1320
• /
• 2015

In this paper Communication data link equipment on a high speed-hopping method to use the frequency resources efficiently for the frequency environment is introduced such as sensing techniques, using the same frequency band by using the received two-channel technique and the receive filter bank unit applied to be shared with other equipment such as radar and so on. The real-time measurement and analysis were operated for measurement the frequency environment of the operating band in advance. and primarily equipment to develop is analyzed how the interference effect to the radar minimize the operation of radar equipment. In reverse, to use the same frequency band the methods such as frequency sharing techniques are presented in this paper. Finally, by design of the main items of the RF transceiver NF, transmission output, and a simulation of the IMD, such as whether the key is verified prior to meet specifications.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.357-362
• /
• 2008

This study have goal with reverse engineering for petrochemistry of high pressure ball valve for localization. Ball valve for development accomplished with flow analysis based on provision of ANSI B16.34, ANSI B16.10, ANSI B16.25 In order to localize the petrochemistry high pressure control valve. Numerical simulation using CFD(Computational Fluid Dynamic) in order to predict a mass flow rate and a flow coefficient form flow dynamic point of view. The working fluid assumed the water($H_2O$). The valve inlet and outlet setup a pressure boundary condition. The outlet pressure was fixed by atmospheric pressure and calculated inlet velocity 5m/s. CFD solver used STAR-CCM+ which is commercial code. The result shows change of mass flow rate according to opening and closing angle of valve. Flow decrease observed open valve that equal percentage flow paten which is general inclination of ball valve. The structural analysis used ANSYS which is a commercial code. Stress analysis result of internal pressure in valve showed lower than yield strength. This is expect to need more detail design and verification for stem and seat structure.