• Transactions of Materials Processing
• /
• v.22 no.1
• /
• pp.5-10
• /
• 2013

Steel plates are widely used in many manufacturing areas such as ship and bridge construction industries and are fabricated by different forming processes. Steel plates can have various shape defects, such as curl or camber. Roller leveling reduces the magnitude of the residual stress by using small amounts of reverse bending via an appropriate arrangement of the rolls and the associated plastic deformation in the steel plate. In this study a model for the residual stress after roller leveling is developed. In order to simplify the formulation, a plane-strain condition is assumed and the stress in the thickness direction is assumed to be negligible. The camber deformation in a real sized plate are measured and compared with the prediction values from the model to validate the accuracy of the model.

• Advances in aircraft and spacecraft science
• /
• v.3 no.3
• /
• pp.259-269
• /
• 2016

In this work results from an underwater experiment on flow-induced noise in the interior of a towed body generated from a surrounding turbulent boundary layer are presented. The measurements were performed with a towed body under open sea conditions at towing depths below 100 m and towing speeds ranging from 2.4 m/s to 6.2 m/s (4 kn to 12 kn). Focus is given in the experiments to the relation between (outer) wall pressure fluctuations and the (inner) hydroacoustic near-field on the reverse side of a flat plate. The plate configuration consists of a sandwich structure with an (thick) outer polyurethane layer supported by an inner thin layer from fibre-reinforced plastics. Parameters of the turbulent boundary layer are estimated in order to analyse scaling relations of wall-pressure fluctuations, interior hydroacoustic noise, and the reduction of pressure fluctuations through the plate.

• Journal of Food Hygiene and Safety
• /
• v.26 no.3
• /
• pp.242-247
• /
• 2011

A greening phenomenon has been observed in some plant foods such as chestnut, sweet potato, burdock, and others during processing. The formation of the pigments was postulated as reactions of primary amino compounds with chi orogenic acid or caffeic acid ester, yielding acridine derivatives. Acridine derivatives have been regarded as mutagenetic agents. For the reason, the bacterial reverse mutation test was carried out to evaluate the genotoxicity of green pigment using Salmonella typhimurium TA98 and TA100. Alanine, arginine, aspartic acid, glycine, lysine, and phenylalanine were reacted repectively with chlorogenic acid to synthesize model compound. Green pigment was extracted from sweet potato. Maximum concentration of 2 and 50 mg/plate was tested for the synthetic green pigments and extracted green pigment respectively, taking bacterial survival, solubility, and color intensity into consideration. There was no signigicant increase in the reverse mutation either with or without S9 activation system by any test material. Though further studies with other genotoxicity test system are necessary, both synthetic and sweet potato green pigments seemed not to cause mutation despite the acridine moiety in their structures.

• Journal of Food Hygiene and Safety
• /
• v.32 no.3
• /
• pp.228-233
• /
• 2017

The aim of the current study was to examine genotoxicological safety of purified bee venom (Apis mellifera L.) The bacterial reverse mutation in Salmonella typhimurium (TA100, TA1535, TA98, and TA1537) and Escherichia coli (WP2 uvrA) were evaluated with purified bee venom at concentrations of 0, 1.5, 5, 15, 50, 150, and $500{\mu}g/plate$. Purified bee venom was negative in Ames test with both in the presence and absence of rat liver microsomal enzyme. According to these results, we concluded that purified bee venom did not cause bacterial reverse mutation. The safety of the purified bee venom at practical doses needs to be further evaluated in in vivo genotoxicity assays.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.6
• /
• pp.373-381
• /
• 2016

In this study, we investigate the characteristics of the drag reduction of a circular cylinder having a detached splitter plate at the wake side. We measure the fluid force on a circular cylinder and visualize the field using particle image velocimetry (PIV) with a high Reynolds number, Re = 10,000. The experimental paraeters used were the width ratios (H/B = 0.5~1.5) of splitters to the prism width and the gap ratios (G/B = 0~2) between the prism and the splitter plate. The drag-reduction rate of the circular cylinder increased with H/B in the case of the same G/B, and it increased and then decreased with G/B in the case of the same H/B. The vortices of the opposite direction on the upper and lower sides of the detached splitter plate were generated by installing the plate. Reverse flow was caused by the vortices at the wake region of the circular cylinder, and the drag of the circular cylinder was decreased by the reverse flow.

• Korea-Australia Rheology Journal
• /
• v.16 no.2
• /
• pp.63-73
• /
• 2004

Flow in a channel with an obstruction at the entry can be reverse, stagnant or forward depending on the position of the obstruction. These flow phenomena have potential applications in the control of energy and various flows in process engineering. Parameters that affect this flow inside and around the test channel are the gap (g) between the obstruction geometry and the test channel, the Reynolds number (Re) and the length (L) of the test channel. The influence of these parameters on the flow behavior was investigated using a flat plate obstruction at the entry of the channel. A low concentration polyacrylamide solution (0.018% by weight) showing a powerlaw fluid behavior was used as the fluid in this investigation. The flow phenomena were investigated by the velocity measurement and the flow visualization and their results were compared with numerical simulation. These results of low concentration polyacrylamide solution are also compared with the results of water published elsewhere (Kabir et al., 2003). The maximum reverse flow inside the test channel observed was 20% - 30% of the outside test channel velocity at a g/w (gap to width) ratio of 1 for Reynolds numbers of 1000 to 3500. The influence of the test channel length (L) and the Reynolds number (Re) on the velocity ratio ($V_i$/$V_o$: inside velocity/outside velocity in the test channel) are also presented and discussed here.

• Korean Journal of Food Science and Technology
• /
• v.29 no.4
• /
• pp.804-807
• /
• 1997

Palatinose is a disaccharide molecule which can substitute sucrose as a sweetening agent. A microbial fermentation technology has been developed to produce palatinose. In order to verify the safety of palatinose products, we have performed 1) bacterial reverse mutation test using Salmonella typhimurium TA1535, TA1537, TA98 and TA100, and 2) in vitro chromosome aberration test using Chinese Hamster Lung (CHL) cell. In bacterial reverse mutation test, both palatinose and palatinose syrup did not induce any significant increase of $His^{+}$ revertants up to 10 mg/plate. In in vitro chromosome aberration test, palatinose and palatinose syrup also did not cause any significant increase of chromosome aberrant cells up to 5 mg/mL. These results suggest that palatinose products have no mutagenic potential in these in vitro mutagenicity tests.

• Journal of ILASS-Korea
• /
• v.15 no.2
• /
• pp.83-93
• /
• 2010

Feedwater heaters of many nuclear power plants have recently experienced severe wall thinning damage, which will increase as operating time progresses. Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle inside feedwater heater installed downstream of the turbine extraction stream line. At that point, the extract steam from the turbine is two phase fluid at high temperature, high pressure, and high speed. Since it flows to reverse direction after impinging the impingement baffle, the shell wall of feedwater heaters may be affected by flow-accelerated corrosion. In this paper, to compare degree of shell wall thinning mitigation rate to squared type with mitigation rate of other type baffle plate, four different types of impingement baffle plate-squared, curved, mitigating type and multi-hole type-applied inside the shell. With these comparison data, this paper describes operation of experiments and numerical analysis which is composed similar condition with real feed water heater. And flow visualization is operated for verification of experiments and numerical analysis. In conclusion, this study shows that mitigating type and multi-hole type baffle plate are more effective than other baffle plate about prevention of pressure concentration and pressure value decrease.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.6
• /
• pp.55-63
• /
• 2010

Feedwater heaters of many nuclear power plants have recently experienced severe wall thinning damage, which will increase as operating time progresses. Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle inside feedwater heater installed downstream of the turbine extraction stream line. At that point, the extract steam from the turbine is two phase fluid at high temperature, high pressure, and high speed. Since it flows to reverse direction after impinging the impingement baffle, the shell wall of feedwater heaters may be affected by flow-accelerated corrosion. In this paper, to compare degree of shell wall thinning mitigation rate to squared type with mitigation rate of other type baffle plate, three different types of impingement baffle plate-squared, curved and mitigating type-applied inside the shell. With these comparison data, this paper describes operation of experiments and numerical analysis which is composed similar condition with real feed water heater. And flow visualization is operated for verification of experiments and numerical analysis. In conclusion, this study shows that mitigating type baffle plate is more effective than other baffle plate about prevention of pressure concentration and pressure value decrease.

• Journal of Ginseng Research
• /
• v.41 no.4
• /
• pp.595-601
• /
• 2017

Background: Red ginseng oil (RGO) is produced by supercritical $CO_2$ extraction of secondary products derived from Korean Red Ginseng extract. As the use of RGO has increased, product safety concerns have become more important. Methods: In the present study, the subacute oral toxicity and bacterial reverse mutagenicity of RGO were evaluated. Sprague-Dawley rats were orally administered with RGO for 28 d by gavage. Daily RGO dose concentrations were 0 mg/kg body weight (bw), 500 mg/kg bw, 1,000 mg/kg bw, or 2,000 mg/kg bw per day. Bacterial reverse mutation tests included five bacterial strains (Escherichia coli WP2 and Salmonella typhimurium TA98, TA100, TA1535, and TA1537), which were used in the presence or absence of metabolic activation. The plated incorporation method for mutation test was used with RGO concentrations ranging from $312.5{\mu}g$ to $5,000{\mu}g$ per plate. Results: The subacute oral toxicity test results did not reveal any marked changes in clinical characteristics. There were no toxicological changes related to RGO administration in hematological and serum biochemical characteristics in either control or treatment animals. Furthermore, no gross or histopathological changes related to RGO treatment were observed. The bacterial reverse mutation test results did not reveal, at any RGO concentration level and in all bacterial strains, any increase in the number of revertant colonies in the RGO treatment group compared to that in the negative control group. Conclusion: The no-observed-adverse-effect level of RGO is greater than 2,000 mg/kg bw and RGO did not induce genotoxicity related to bacterial reverse mutations.