• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.2
• /
• pp.178-190
• /
• 1998

We have developed a planar impact model with a capability of reverse calculation to reconstruct various types of automobile collisions. This topic is the main part of what is referred to as accident reconstruction. The model uses the principle of impulse and momentum, and introduces a restitution coefficient and an impulse ratio at the impact center. Based on the car-to-car collision test results, we present how to estimate the restitution coefficient and the impulse ratio from some impact conditions. To validate the model and improve its reliability in accident analysis, the collision analysis has been performer with the estimated parameters. The analysis and experimental results agree well in the kinetic energy loss and the post-impact velocity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11B
• /
• pp.989-997
• /
• 2008

The reverse acknowledgment (RA) scheme supports a fast loss recovery for negative acknowledgment (NAK)-based selective repeat automatic repeat request (SR-ARQ) by detecting a retransmission failure quickly before a retransmission timer expires. In this paper, we evaluate the performance of a NAK-based SR-ARQ protocol with the RA scheme and compare it with the conventional NAK-based SR-ARQ protocol. Particularly, we propose a simple analysis model for the transport delay of the NAK-based SR-ARQ protocol considering the traffic condition, the retransmission persistence, the timer-based retransmissions and the RA scheme's behavior. Both NAK-based SR-ARQ protocols with and without the RA scheme are implemented by using the OPNET simulator. We verified the analysis model's accuracy through the simulation results. Also, we evaluate the performance of the NAK-based SR-ARQ protocol with the RA scheme based on analysis and simulation results.

• Clean Technology
• /
• v.6 no.2
• /
• pp.129-137
• /
• 2000

A methanol synthesis process via reverse-water-gas-shift and methanol formation reactions has been analyzed using the notion of exergy. The analysis has been based on the simulation results with the aid of real operating data. Driving and material exergy losses have been defined and quantified, respectively. Locations and the reason of major exergy losses have been pinpointed and improvement strategies have been suggested. It had been noted that the exergy analysis can provide a sound scientific base for adopting the concept of industrial ecology and developing loss prevention schemes.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05b
• /
• pp.82-85
• /
• 2004

Flux-enhancement mechanism of thin-film-composite (TFC) membranes for the reverse comosis (RO) process was newly explained by positron annihilation lifetime spectroscopy (PALS) that has been found to be applied for detecting molecular vacancies or pores having sizes that are equivalent to salt or hydrate ions in RO membrane.(omitted)

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.4
• /
• pp.265-272
• /
• 2006

For the design and analysis of 3D object featuring complexity and irregularity in shape, sectional digital images measured by an industrial CT scanner are employed to generate a finite element model with uniform voxels. The voxel model plays a key role in developing an integrated reverse engineering system including geometric modeling, simulation and optimization. Design examples applied to topology optimization show that the proposed approach can provide a remarkable reduction in time cost at the conceptual and detail design stages.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.23 no.3
• /
• pp.161-167
• /
• 1997

Determination of several cationic surfactants in cosmetics has been investigated. Reverse phase ion pair chromatography was used to identify and quantitate cationic surfactants. Cationic surfactants analyzed in this experiment were cetylpyridium chloride, stearyltrimetylammonium chloride, bezalkonium chloride, benzyldicethylcetylammonium chloride, and bihenyltrimethyl ammonium chloride. The separation was achieved on a reverse phase coumn with 10mM HCl-acetonitrile eluent. In this condition, the most of cationic surfactants with exception of CPC and CTAC respectively with suppressed conductivity detector and UV detector connected in series. The calibration curves obtained by plotting the peak areas of the cationic surfactants were linear at levels ranging from 0.005 to 0.1% correlation coefficient, r=0.9988. The detection limits were 1 to 5ppm in sample solution. The average recoveries of cationic surfactants added to hair treatment cream and hair rinse in three to five experiments were 96.7 105.2% and relative standard deviations were 1.1-3.8%. The case that there were CPC and CTAC in same solution was also tested. CPC and CTAC which couldn't be separated on reverse phase column were quantitated with suppressed conductivity detector and UV detector connected in series. Recovery of CPC and CTAC were 101.6 and 89.2% respectively. The proposed method was applied to the determination of cationic surfactants in commercial hair treatment cream.

• BMB Reports
• /
• v.45 no.3
• /
• pp.165-170
• /
• 2012

We report here that an ethanol extract of Tetracera scandens, a Vietnamese medicinal plant, has anti-HIV activity and possesses strong inhibitory activity against HIV-1 reverse transcriptase (RTase). Using a MT-4 cell-based assay, we found that the T. scandens extract inhibited effectively HIV virus replication with an $IC_{50}$ value in the range of 2.0-2.5 ${\mu}g$/ml while the cellular toxicity value (CC50) was more than 40-50 ${\mu}g$/ml concentration, thus yielding a minimum specificity index of 20-fold. Moreover, the anti-HIV efficacy of the T. scandens extract was determined to be due, in part, to its potent inhibitory activity against HIV-1 RTase activity in vitro. The inhibitory activity against the RTase was further confirmed by probing viral cDNA production, an intermediate of viral reverse transcription, in virus-infected cells using quantitative DNA-PCR analysis. Thus, these results suggest that T. scandens can be a useful source for the isolation and development of new anti-HIV-1 inhibitor(s).

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.2
• /
• pp.97-111
• /
• 2015

In this paper, a methodology for effectively treating daily waste at D metropolitan city is considered using reverse logistics(RL) network. Currently, eight district offices at D metropolitan city are treating their daily wastes using each RL network. However, unfortunately, current method has a weakness such as inefficiency of RL network operation. Therefore, we propose a revised method for improving the inefficiency. In case study, we compare the performances of the current and revised methods using various real-life data. The analysis result shows that the revised method outperforms the current method.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.6
• /
• pp.735-741
• /
• 2010

A pilot test was carried out to investigate the long term operation characteristics of Microfiltration (MF) system as a pretreatment for seawater reverse osmosis (SWRO) processes for two years. A commercialized MF module with pressurized operation type was used to filter seawater to remove particles which can foul reverse osmosis (RO) membrane. Silt Density Index (SDI) values of filtered seawater by the MF system were ranged from 0.14 to 1.79, which meet the SDI standard for RO feed water as depicted in previous literatures. Although the tested seawater is quite clean (i.e., dissolved organic cabon (DOC) concentration and turbidity were about 1 mg/l and less than 1 NTU, respectively) enough not to foul the MF membrane, steep increase in trans-membrane pressure (TMP) with a constant flux were observed over a whole operation period. A set of operation and water analysis data implies that the steep increase in TMP was resulted from iron and maganese fouling by the combination of metal corrosion by seawater and oxidation state by aeration and residual chlorine.

• Journal of the Korean Society for Heat Treatment
• /
• v.12 no.4
• /
• pp.313-319
• /
• 1999

The reverse transformation behavior was investigated by DSC analysis in thermomechanically processed Fe-30%Ni-0.35%C alloy. Upon increasing the heating rate from $5^{\circ}C/min$ to $80^{\circ}C/min$, the As point of the ausformed martensite was not changed and the As point of the marformed martensite decreased at reverse transformation. The Af points showed to be constant with increasing the heating rate both in the ausformed martensite and in the marformed martensite. With increasing the deformation degree, the As points of the ausformed martensite and the marformed martensite increased and the Af points appeared to be constant, structures. The enthalpy changes increased with increasing the heating rate, but decreased with increasing the deformation degree in both structures.