• 상하수도학회지
• /
• 제18권5호
• /
• pp.573-579
• /
• 2004

Electroflotation, which is used as an alternative to sedimentation, is a separation treatment process that uses small bubbles to remove low-density particulates. Making allowances for recent collision efficiency diagram based on trajectory analysis, it is necessary to tailor zeta potential of bubbles that collide with negatively charged particles. In this paper, the study was performed to investigate the effects of magnesium and aluminium ions on zeta potential of bubbles. And, it was studied to find out factors which could affect the positively charged bubbles. Consequently, zeta potential of bubbles increased both with higher concentration of metal ions and in the acidic pH value. And, a probable principle that explained the procedure of charge reversal could be a combined mechanism with both specific adsorption of hydroxylated species and laying down of hydroxide precipitate. It also depended on the metal ion concentration in the solution to display its capacity to control the bubble surface.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.722-725
• /
• 2014

The spatial focusing of time reversal Lamb waves on a plate has attracted considerable attention for identifying the location of an input source. This study investigates the spatial focusing performance on a plate with respect to the number of piezoelectric (PZT) sensors for varying locations of input sources. In particular, a small number of PZT sensors produce spatial focusing through the virtual sensor effect due to reflection of Lamb waves at plate edges. The spatial focusing performance with respect to the number of PZT sensors is quantified in terms of signal to noise ratio through numerical simulation and its implication is discussed.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2008년도 추계학술대회 및 정기총회
• /
• pp.520-524
• /
• 2008

This research verifies the phenomenon of which the Momentum and Reversal effect of stock price would depend on the subject of investment in the point of view of the Behavior Finance hypothesis. For the experiment, this paper uses the KOSPI200 daily data and Net Investment Flow from Jan. 1999 to Dec. 2006. And we analyze the marginal profit and loss with foreigners, individual investors, and institutions. We verify the response of the subjects of investment based on the CAR for 3 days after more than 3 percent rising or drop. We also verify the response with respect to the ascending and descending trend based on the profit trend and subjects' behaviors a week before the drop.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 The 8th Asian Symposium on Precision Forging ASPF
• /
• pp.162-166
• /
• 2003

In combined forward-backward extrusion with controlled forward speed by a counter punch, accurate parts with forward rod can be formed. As an extension of this method, reverse extrusion is proposed, in which the extruded forward rod is pushed back while the main punch is kept at the final position after the forward-backward extrusion process. The experiment is carried out using lead as a model material. With the reverse extrusion method, longer forward rods can be formed without under-filling defect than that by combined extrusion with controlling extrusion speed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.715-722
• /
• 2012

A structural health monitoring (SHM) technique for locating impact position in a composite plate is presented in this paper. The technique employs a single sensor and spatial focusing properties of time reversal (TR) and inverse filtering (IF). We first examine the focusing effect of back-propagated signal at the impact position and its surroundings through simulation. Impact experiments are then carried out and the localization images are found using the TR and IF signal processing, respectively. Both techniques provide accurate impact location results. Compared to existing techniques for locating impact or acoustic emission source, the proposed methods have the benefits of using a single sensor and not requiring knowledge of material properties and geometry of structures. Furthermore, it does not depend on a particular mode of dispersive Lamb waves that is frequently used in the SHM of plate-like structures.

• Journal of Magnetics
• /
• 제5권1호
• /
• pp.4-8
• /
• 2000

Local coercivity variation of Co/Pd nanomultilayers has been investigated by measuring the polar Kerr hysteresis loops of local areas of submicron size using a magnetooptic Kerr microscope system. Interestingly, the local coercivity distribution is very sensitive to an increase in the number of repeats: the $(2-{\AA}\;Co/ll-{\AA} Pd)_10$ sample showed a smooth variation of the local coercivity, while $(2-{\AA}\;Co/ll-{\AA} Pd)_18$ showed a large fluctuation. From micromagnetic considerations based on a thermally activated relaxation odel, we have found that this local coercivity variation has a crucial effect on the contrasting magnetization reversal behavior observed in those samples: dominant wall-motion far the former sample and dominant nucleation for the latter one.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2001년도 춘계연구발표회 논문개요집
• /
• pp.108-109
• /
• 2001

• The Journal of Asian Finance, Economics and Business
• /
• 제5권4호
• /
• pp.21-34
• /
• 2018

The study tests the Fama and French three-factor model by using the newly created Islamic equity style indices. Based on a dataset from May 2006 to April 2011, the three-factor model is tested based on returns of Islamic unit trust funds using the Generalized Method of Moments (GMM) methodology. The sample period is also divided between periods before and after the Global Financial Crisis in August 2008 to test for robustness, and the Bai and Perron (2003) multiple structural break test was used to determine the structural break in the series. The analysis shows that the Fama and French model is valid for Islamic unit trust funds before and after the collapse of Lehman Brothers. The result further indicates the reversal of size effect. As for trading strategies, value funds outperform growth funds by annualized 3.13 percent for the full period. During pre-crisis period, value funds perform better than growth funds while in post-crisis, size factor yields better return than other strategies. As policy suggestion, fund managers need to be aware of the reversal of size effect, and they need to ensure a more transparent stock selection process so that investors can make an informed decision in their asset allocation.

• 한국전산구조공학회논문집
• /
• 제19권4호
• /
• pp.347-356
• /
• 2006

본 논문에서는 단면상의 화이버 요소를 사용하여 3차원 강구조물의 점진적인 소성화를 고려하는 실용적인 비선형 비탄성 해석방법을 개발하였다. 부재의 p-$\delta$, p-$\Delta$ 등의 기하비선형은 안정함수로 고려하였다. 잔류응력은 단면상에 있는 화이버 요소에 초기응력을 가하여 고려하였다. 각 하중 단계에서 탄성상태인 단면을 계산하여 축강성과 휨강성을 직접 결정함으로서 점진적인 소성화를 고려하였다. 각 화이버 요소의 응력 변화를 계산하여 변형률 반전효과를 고려하였다. 제안된 해석 방법은 3차원 강구조물의 실용적인 해석 및 설계에 유용하게 사용될 것이라 판단한다.

• 한국자기학회지
• /
• 제5권4호
• /
• pp.251-260
• /
• 1995

Co계 비정질 강자성 합금을 1 Oe 이하의 작은 자장 중에서 큐리 온도 이하로 열처리하면 재현성 있는 비대칭 자기이력곡선이 얻을 수 있다는 사실이 보고된 바 있다. 열처 리시 자장의 방향을 (+)라고 하면 (+)에서 (-)에로의 자화반전은 단 한 번의 비가역적 인 Barkhausen jump에 의해서 이루어지며, (-)에서 (+)로의 자화반전은 완만하고 가역 적이다. 이때 이력곡선의 기울기는 시료의 반자장에 의해 결정된다. 이러한 현상을 비 대칭 자화반전이라 한다. 이력곡선의 모양과 재현성은 열처리시 가하는 자장의 크기, 열처리 온도와 시간, 열처리 분위기 등 열처리 조건과 합금의 조성에 따라 크게 바뀐다. 본 연구는 영자왜 조성인 (Fe/sub 0.06/Co/sub 0.94/)/sub 75/Si/sub 10/B/sub 15/ 비 정질 자성 합금을 100 mOe의 자장하에서 열처리할 때 열처리 온도와 시간이 비대칭 자 화반전에 미치는 영향에 대한 것이다. 자화 반전 효과는 비교적 높은 온도에서 짧은 시간에 생성되나 열처리 시간이 길어질수록 안정화된다.