• 한국소음진동공학회논문집
• /
• 제16권1호
• /
• pp.34-39
• /
• 2006

For the evaluation of the normalized impact sound pressure level, the reverberation time of the receiving room should be measured. This paper deals with the effect of the time constant of FFT analyzer and the measuring points on reverberation time. It is found that the time constant should be in the range between 10 ms and 35 ms. While the effect of measuring points on the reverberation time is significant when the bandwidth is narrow it is negligible in the evaluation of the normalized impact sound pressure level.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 추계학술대회 논문집
• /
• pp.586-591
• /
• 2010

The sound field can be classified to the direct and reverberant sound field. If the sound absorption material in a room is not applied sufficiently, the reverberant sound field increases and the sound pressure in a room also increases when the sound source exists in a room. Therefore, the reverberation time should be controled in order to reduce the reverberant sound as well as sound pressure level in a room. Even though the reverberation time is specified and researched widely in architectural engineering, it is rarely performed in a marine engineering. Therefore, in this research, the reverberation time in a navel vessel is researched related to the noise reduction in a cabin.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.492-497
• /
• 2006

This study gives the results of the measurements and analysises of the reverberation times in a small room such as apartment houses. We measured the RT by changing measurement conditions, which were sound sources. sound source's positions, receiving point & height, sampling time and so on. The critical factor affecting reverberation time was sound source in unoccupied houses and the reverberation time differences between result of RT using impulsive and interrupted sound source was 0.3sec at 500Hz frequency. And the difference of RT due to sound sources affected the sound insulation such as apparent sound reduction index and sound level difference about 1dB at each frequency in unoccupied houses.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.242-242
• /
• 2013

Recently, importance of working environment is increased in commercial vessel and offshore structure. Marine facility design and ambient environment condition are influenced to enhancing human performance and reducing human errors. Consequently, the quality of accommodation where offshore facility crews sleep, eat and relax will influence their job performance and overall sense of comport and well-being. Therefore, adequate acoustic isolation between adjacent spaces is normally required to achieve satisfactory internal noise levels, acoustic privacy and speech intelligibility. In this study, the reverberation time is investigated in the public areas where there are not provided the information of material's noise reduction coefficient (NRC). The experiment of reverberation time is rarely performed for the various type public areas in a marine structure. Therefore, the reverberation time in a vessel is investigate in order to evaluate the room's noise reduction coefficient (NRC) in a public area.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1104-1108
• /
• 2001

It is a difficult and important task to measure the reverberation time of an acoustic room with a short reverberation time. This paper presents a new technique to measure the reverberation time of an acoustic room with low value of BT60. The digital signal processing technique used to do this is the wavelet filter which is very flexible to design the 1/n octave band filter and has no delay problem compared with the conventional IIR digital filter. This method is successfully applied to the measurement of the reverberation time at low frequency band of famous concert halls in Korea.

• 한국해양공학회지
• /
• 제33권4호
• /
• pp.358-363
• /
• 2019

The acoustic power is used as a primary index characterizing underwater sound sources and could be defined by its source level. The source level has been assessed using various experimental techniques such as the reverberation time method and reverberant tank plot method. While the reverberation time method requires reverberation time data extracted in a preliminary experiment in a reverberant water tank, the reverberant tank plot method only needs acoustic pressure data directly obtained at the reverberation water tank. In this research, these experimental techniques were studied in comparative experiments to estimate the source levels of underwater sources in a reverberant water tank. This paper summarizes the basic theories and procedures of these experimental techniques and presents the experimental results for an underwater source in a long cuboid water tank using each technique, along with a discussion.

• 한국음향학회지
• /
• 제25권6호
• /
• pp.257-268
• /
• 2006

도자기 컵의 결함여부를 판정하는 간편한 방법으로 실내에서 충격 시험으로 추정한 유사잔향시간을 사용하는 방법을 제시하였다. 정상적인 도자기 컵과 미세한 균열이 있는 컵에 대하여 충격 시험을 하여 발생하는 충격음에서 구한 슈레더 곡선에서 잔향 시간을 추정하였다. 충격 가진 막대의 종류와 가진 위치, 경계 조건에 따라 잔향 시간을 추정하였고 추정된 잔향 시간으로부터 도자기 컵의 결함 유무를 효과적으로 파악할 수 있는지를 기술하였다

• 한국음향학회지
• /
• 제13권6호
• /
• pp.66-74
• /
• 1994

잔향음이 우세한 환경하에서 소나 시스템의 성능을 평가할 때 대부분의 음향 모델인 음압 준위(power level) 모델에 비해 수중 잔향음 신호 모의 모델은 매우 유용하게 이용된다. 본 논문에서는 소나 시험에 필요한 잔향음 신호(reverberation time series)를 모의하였다. 우선 주파수 영역에서 밴드의 폭이 변하고 가우시안 분포(Gaussian distribution)를 갖는 표준화된 스펙트럼(normalized spectrum)을 수신 시간 간격에 따라 구하였다. 두번째로, 기존의 음향 모델의 결과인 시간에 따른 잔향음 준위를 각각의 표준화된 스펙트럼의 준위와 합성하였다. 마지막으로 음원 신호의 스펙트럼과 잔향음 스펙트럼을 곱(product)하고 이 결과를 역푸리에 변환(inverse Fourier transform)을 이용하여 신호를 모의하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.742-742
• /
• 2003

This study is about the effect of the sound pressure level of reverberation on stage acoustics. There are several electro-acoustics systems to enhance the room acoustics of concert hails but not many studies on the stage acoustics for the musicians who plays on the stages. To investigate the effect of reverberation on stage acoustics, the reverberation time of a test room has been controlled through a 4 channel speaker system, and the preferred reverberation level has been selected by performing musicians. As a result, the sound pressure level of reverberation seems to affect the perception of stage acoustics which motivates musicians' performances.

• 천문학회보
• /
• 제41권1호
• /
• pp.70.4-71
• /
• 2016

The links between super-massive black hole masses and their host galaxy properties are observed, indicating that black hole growth and host galaxy evolution are closely related. Reverberation mapping, which uses the time delay from the central black hole to broad line regions, is one of the best methods to estimate masses of black holes of active galactic nuclei (AGNs). However, only masses of about 50 black holes have been determined in reverberation mapping studies so far, and most of them are limited to optical luminosities below 10^45 erg/s due to the challenges of long-term time domain observations in both photometry and spectroscopy. In this project, we expand reverberation mapping samples to higher luminosities of > 10^44.5 erg/s at 0.1 < z < 0.35, that have expected time lags of 40 - 250 light days. Photometric (using LOAO 1-m and MDM 1.3-m) and spectroscopic (using MDM 2.4-m and Lick 3-m) monitoring campaigns are being conducted for a 3 year duration and 20 day cadence. Precedent photometric observations in 2015B show some targets with variability and follow-up spectroscopic observations are on-going. In this presentation, we introduce our project, present reverberation mapping simulation results, and preliminary results on photometry. These reverberation mapping masses of relatively high luminous AGNs will provide a strong constraint on black hole mass calibration, e.g., the single-epoch mass estimation.