• 한국환경과학회지
• /
• 제22권11호
• /
• pp.1465-1471
• /
• 2013

To develop the protein materials by the reutilization of dead flatfish from fish farms in Jeju island, the physicochemical characteristics and the functional activities of collagen peptide extracts were investigated. Flatfish skin collagen peptide (FSCP) and flatfish protein hydrolysate (FPH) were manufactured from dead flatfish. The differences of pH, moisture and fat contents between FSCP and FPH were not significant, fat contents were analyzed less than 0.3%, and trans-fat, saturated fat and cholesterol were not detected in both samples. Protein contents of FSCP and FPH showed about 92% and 95%, respectively. In the analysis of amino acids, glycine and hydroxy proline content in FSCP was 24.22% and 6.15%, respectively, showed a typical characteristics of the collagen protein, but essential amino acids contents such as threonine, valine, methionine, isoleusine, leusine and phenylalanine were relatively higher than those of FPH. Average molecular weight of FSCP was measured as 1,102 which was almost equal value with that of tuna collagen peptide. The antioxidant activities and functional properties showed high but did not show significant difference between two samples.

• 펄프종이기술
• /
• 제44권6호
• /
• pp.58-69
• /
• 2012

As the meaning of dictionary terminology, scum refers to a layer of impurities that accumulates at the surface of a liquid. In papermaking process, scum indicates the floated solid waste generated by a flotation process during the primary wastewater treatment. In this study, different kinds of stocks and scums collected from newspaper, liner, tissue and fine paper were analysed in details. The purpose of this study was firstly to demonstrate the composition characteristics of different sources of scum, secondly the analysis of environmental hazardous materials, and thirdly the evaluation of reutilization ability of fibrous materials from collected scum. As mentioned the meaning of solid waste, scum was actually differ from the waste sludge in sources, compositions and recycling abilities. In the same manner of waste paper, the sludge which is generated within onsite of papermaking processes would be reused as a raw material. The general compositions of scum from waste water were mainly inorganic ash materials, fine fibre fractions, recycled fibre debries, and ink particles. If the scum is able to reuse as fibrous additives in papermaking process, it could contribute to the savings of running costs in both the subsidiaries of fibrous material and the solid waste treatment with even small quantity.

• Journal of the Korean Wood Science and Technology
• /
• 제17권3호
• /
• pp.45-51
• /
• 1989

A major problem in the enzymatic hydrolysis of lignocellulosic substrates is the very strong bonding of cellulase to lignin and even cellulose in the hydrolysis residues. This phenomenon inhibits recycle of the cellulase which is a major expense of the enzymatic hydrolysis process. In this paper, autohydrolyzed wood was delignified by two-stage with a 0.3% Na OH extraction and oxygen-alkali bleaching and was subjected to enzymatic hydrolysis with cellulase. Also, an improved almost quantitative recycle process of cellulase enzyme was discussed. In enzyme recovery by affinity method. the first recycling showed relatively high hydrolysis rate of 97.4%. Even at the third recycle. hydrolysis rate was 86.7 percents. In the case of cellulase recovery by ultrafiltration method, first 2 recycling treatments resulted very high hydrolysis rate(97.0-97.7%). Even the third recycling showed about 94.2%. Authoydrolysis of oak wood followed by 2-stage delignification with alkali and oxygen-alkali produced a substrate for enzymatic hydrolysis that allowed almost quantitative recycle of cellulase.

• 자원ㆍ환경경제연구
• /
• 제11권3호
• /
• pp.465-491
• /
• 2002

Korea is one of the countries which have a remarkable record of high and sustained economic growth. However, as the national economy has continued to grow and the industrial structure has become increasingly advanced, the amount of wastes being generated has been rapidly on the rise. recycling wastes to cope with the environmental problems caused by wastes has become an increasingly important policy issue in developing countries such as Korea, as well as in developed countries. This situation demands that researchers provide policy-makers with available and responsible information regarding the effect of the recycling industry in the public sector. This study employs input-output (I-O) analysis to examine the effect of public sector recycling industry in the national economy, using a specific application to Korea. The paper, therefore, has two major goals. The first is the development of a static I-O framework for looking into the effect of public sector recycling industry in the short run. The second goal is obtaining at least a preliminary indication of the effect of the recycling industry- in public sector. Moreover, we discuss the role of a public firm that established with an objective of promoting and facilitating the reutilization of recyclable wastes. The overall results indicate that the recycling utilities may have a significant influence on the standard of living and industrial production.

• Journal of the Korean Wood Science and Technology
• /
• 제22권3호
• /
• pp.26-31
• /
• 1994

To provide further information for reutilization of the waste wood obtained after cultivating oak mushroom in Kangwon-do, the crystal structures of the waste wood were investigated and compared to those of normal woods by a series of x-ray diffraction analysis. The results obtained are as follows: 1. An x-ray diffraction diagram of cultivated wood for 5 years was same as that of typical cellulose with some orientation of cellulose crystallites, but that of cultivated wood for 8 years a random. 2. Crystallinity indices in normal and cultivated woods for 5 years ranged from 57% to 60%. In the cultivated wood for 8 years, however, the value showed about 40%. 3. Crystallite widths of cultivated woods for 5 years and for 8 years were 3 nm and 2.5 nm, respectively. 4. Intensity ratios of equatorial and meridional layers did not show any significant differences. From the above results, it is clear that the waste wood obtained after cultivating oak mush room for 5 years showed basically same crystal structures with normal wood. Therefore, we think that the waste wood may be used available for cellulosic material instead of normal wood.

• Computers and Concrete
• /
• 제10권2호
• /
• pp.95-104
• /
• 2012

This study uses recycled green building materials based on a Taiwan-made recycled mineral admixture (including fly ash, slag, glass sand and rubber powder) as replacements for fine aggregates in concrete and tests the properties of the resulting mixtures. Fine aggregate contents of 5% and 10% were replaced by waste LCD glass sand and waste tire rubber powder, respectively. According to ACI concrete-mixture design, the above materials were mixed into lightweight aggregate concrete at a constant water-to-binder ratio (W/B = 0.4). Hardening (mechanical), non-destructive and durability tests were then performed at curing ages of 7, 28, 56 and 91 days and the engineering properties were studied. The results of these experiments showed that, although they vary with the type of recycling green building material added, the slumps of these admixtures meet design requirements. Lightweight aggregate yields better hardened properties than normal-weight concrete, indicating that green building materials can be successfully applied in lightweight aggregate concrete, enabling an increase in the use of green building materials, the improved utilization of waste resources, and environmental protection. In addition to representing an important part of a "sustainable cycle of development", green building materials represent a beneficial reutilization of waste resources.

• 한국세라믹학회지
• /
• 제44권1호
• /
• pp.12-17
• /
• 2007

Recently, Korean food culture has westernized and the consumption of meat has been increased. As a result an enormous amount of disposal of bone is generated and most of them are buried without reutilization. By making bone ash using pig bone, the possibilities of application are examined. The purpose of this study is to establish a manufacturing process of bone ash for the celadon bone body using pig bone. The calcination of the pig bone was mostly to change to the calcium phosphate hydroxide $(Ca_5(PO_4)_3OH)$. The celadon body mixed with pig bone ash 8%, $CaCO_3$ 9%, when fired at $1240^{\circ}C$ under reduction atmosphere, shows 0.1% of water absorption, 65.23 MPa of bending strength.

• 센서학회지
• /
• 제24권1호
• /
• pp.29-34
• /
• 2015

This study aimed to evaluate the characterization of a metal oxide semiconductor and electrochemical gas sensor array for measuring wastewater odor. The sensitivity of all gas sensors observed in sampling method by stripping was 6.7 to 20.6 times higher than that by no stripping, except sensor D (electrochemical gas sensor). The average reduction ratio of sensor signal as a function of initial dilution rate of wastewater was in the order of food plant > food waste reutilization facility > plating plant. The sensitivity of gas sensors was dependent on both the type of wastewater and the dilution rate. The sensor signals observed by the gas sensor array were correlated with the dilution factor (OU) calculated by the air dilution sensory test with several wastewater ($r^2=0.920{\sim}0.997$), except the sensor signals of sensor D measured in the plating plant wastewater. It seems likely that the gas sensor array plays a role in the evaluation of odor in wastewater and is useful tool for on-site odor monitoring in the wastewater facilities.

• 열처리공학회지
• /
• 제9권3호
• /
• pp.219-227
• /
• 1996

The purpose of this research is to develop the technology for the synthesis of (Ti,Al)N powder, which shows simultaneously the excellent properties of TiN and AlN, from the Ti-Al intermetallic compounds by the direct nitriding method. The effects of variables such as temperature, Ti-Al intermetallic compounds ($TiAl_3$, TiAl and $Ti_3Al$) were investigated by TG, XRD and SEM. The (Ti,Al)N powder can be easily synthesized from the intermetallic compounds by the direct nitriding method. Among the intermetallic compounds, the nitriding behavior increased with TiAl> $Ti_3Al$ > $TiAl_3$, as the difference of diffusion coefficient for nitrogen in each materials. The ternary nitride such as $Ti_2AlN$ and $Ti_3Al_2N_2$ can be synthesized by the direct nitriding method, although the ternary nitride coexist with TiN and AlN. The ternary nitrides are stable below $1400^{\circ}C$, but these are gradually decomposed into TiN and AlN above $1400^{\circ}C$.

• 펄프종이기술
• /
• 제35권2호
• /
• pp.39-45
• /
• 2003

This study was performed to develop the new type enzyme immobilization sheet from carboxymethylated refiner mechanical pulp (CRMP) substrate. Enzyme immobilization was attempted to couple carboxyl groups of CRMP with amino groups of the enzyme, trypsin, through the reaction of carbodiimide reagent, 1-ethyl-3-(3-dimethyl aminopropyl)-carbodimide (EDC ). Immobilization carrier, water insoluble CRMP fraction (CRMP-IS), was successfully reacted with the enzyme, formed peptide linkage like -CONH- at 1680$cm^{-1}$ / and new ester linkage like -COO$CH_3$, methylester at 1735$cm^{-1}$ /, and produced enzyme immobilized substrate (CRMP-IST). The enzyme immobilized handsheet was prepared by mixing the above chelated enzyme immobilized substrate(CRMP-IST) with kraft pulp by paper sheet machine like papermaking process. The sheet weight and strength were increased with increasing dosage of CRMP-IST, and decreased at more than 10％ mixing of CRMP-IST, but higher than the controls. Concerning activities of immobilized trypsin(CRMP-IST) sheet by caseinolysis, the teared-off sheet with shaking was shown higher enzyme activities than sheet shape without shaking. In conclusion, this enzyme immobilized sheet would be expected easy handling for practical application and reutilization.