• 지질공학
• /
• 제15권2호
• /
• pp.155-168
• /
• 2005

절개사면에 설치 된 흙막이벽의 거동은 도심지 굴착공사에 적용된 흙막이벽의 거동과 다르다. 배면경사지 설치된 흙막이벽 설계법을 확립하기 위하여는 흙막이벽 및 배면지반의 변형거동을 상세히 규명할 필요가 있다. 따라서, 본 연구에서는 아파트 신축부지 절개사면의 보강을 위하여 앵커지지 흙막이벽과 억지말뚝이 설치된 사면을 대상으로 현장계측을 수행하였다. 계측결과 굴착초기 흙막이벽의 변형은 배면경사지반의 변형보다 크게 발생되지만, 굴착깊이가 깊어짐에 따라 배면경사지반의 변형이 크게 발생됨을 알 수 있다. 이러한 이유는 굴착초기에 흙막이벽의 변형이 흙막이 말뚝의 강성과 앵커인장력에 의하여 억제되었기 때문으로 판단된다. 앵커에 도입된 선행인장력은 흙막이벽의 거동에만 큰 영향을 미치며, 강우로 인한 흙막이벽의 변형은 지하수위의 변화보다 지표면 부근에서의 침투수에 의해 영향을 받는다 한편, 굴착배면의 경사진 사면에 설치된 앵커지지 흙막이벽의 수평변위는 굴착배면지 반이 수평인 흙막이벽의 수평변위 보다 2-6배정도 크게 발생하였다.

• 지질공학
• /
• 제19권4호
• /
• pp.475-482
• /
• 2009

절토사면에 설치된 흙막이벽의 거동은 도심지 굴착공사에 적용된 흙막이벽의 거동과는 다를 것이다. 배면경사지에 설치된 흙막이벽 설계법을 확립하기 위하여는 흙막이벽 및 배면지반의 변형거동을 상세히 규명할 필요가 있다. 따라서, 본 연구에서는 아파트 신축부지 절개사면의 보강을 위하여 앵커지지 흙막이벽과 억지말뚝이 설치된 사면을 대상으로 계측을 수행하였다. 계측결과 굴착초기에는 흙막이벽의 변형이 배면경사지반의 변형보다는 크게 발생되나, 굴착깊이가 깊어짐에 따라 배면경사지반의 변형이 크게 발생되었다. 이는 굴착으로 인한 흙막이벽의 변형이 흙막이말뚝의 강성과 앵커인장력에 의하여 억제되었기 때문으로 판단된다. 앵커에 도입된 선행인장력은 흙막이벽의 거동에만 큰 영향을 미치며, 강우로 인한 흙막이벽의 변형은 지하수위의 변화보다 지표부근에서 침투된 침투수의 영향이 큰 것으로 나타났다. 한편, 굴착배면의 경사진 사면에 설치된 앵커지지 흙막이벽의 수평변위는 굴착배면지반이 수평인 흙막이 굴착의 경우 보다 2~6배 정도 크게 발생하였다.

• 한국지반신소재학회논문집
• /
• 제7권3호
• /
• pp.31-40
• /
• 2008

탄소성구성방정식을 적용한 유한요소법을 이용하여 흙막이벽의 변형형상에 따른 배면지반의 변형거동을 예측하였다. 굴착배면 지반의 변형형상은 흙막이벽 부근에서는 흙막이벽 변형형상과 유사하게 나타나지만 흙막이벽으로부터 멀어질수록 켄틸레버 형상으로 변한다. 그리고 흙막이벽의 상부변형을 억제시키면 배면지반의 변형(침하량, 측방이동량)을 감소시킬 수 있다. 또한, 굴착에 따른 흙막이벽의 변형형상은 굴착배면지반의 소성파괴영역 및 안전율 저하영역에 영향을 미치는 것으로 나타났다.

• 한국지반공학회논문집
• /
• 제24권3호
• /
• pp.25-34
• /
• 2008

프리스트레스트 띠장을 적용한 새로운 흙막이 시스템에 대한 유한요소 해석이 수행되었다. 본 연구에서는 프리스트레스트 띠장을 적용한 흙막이 시스템의 거동을 규명하기 위하여 3 차원 유한요소 모델이 적용되었다. 새로운 흙막이 시스템에 대한 유한요소 모델링 절차와 방법이 제시되었다. 지반, 벽체, 버팀보 및 프리스트레스트 띠장 시스템을 구성하고 있는 띠장, 받침대, 강선에 대한 모델링과 지반-벽체 그리고 벽체-띠장 간의 접촉면 모델링이 제시되었다. 벽체 횡방향 변위, 버팀보 축력, 프리스트레스트 띠장 시스템 부재인 띠장과 받침대 축력에 대한 유한요소 해석결과가 현장 계측결과와 비교 검증되었다. 검증된 3 차원 유한요소 모델을 이용하여 강선 인장력 변화에 따른 새로운 프리스트레스트 띠장의 휨모멘트와 변형 거동이 규명되었으며 이에 따른 흙막이 벽체 배면에서의 토압 거동이 규명되었다.

• 대한핵의학회지
• /
• 제23권1호
• /
• pp.41-48
• /
• 1989

$^{99m}Tc-Pertechnetate\;(TcO_4^-)$ is concentrated by the stomach after intravenous injection, allowing the detection of ectopic gastric mucosa. It has been used to develop a noninvasive test of gastric secretion. However the cellular site of concentration is still controversial, that is whether mucin-secreting epithelial cell or acid-secreting parietal cell. This study is planned to investigate the effects of cimetidine and gastric acidity on the retention of $TcO_4^-$ in the gastric wall of the rat. Also we further attempted to clarify the uptake and secreting cell of $TcO_4^-$ in the gastric mucosa. One hundred rats were divided into two groups, preliminary (40 rats) and main examination group (60 rats). Preliminary examination group was composed of fasting group (20 rats) for the detection of the time for reaching stable $TcO_4^-$ retention ratio in gastric wall and post-prandial group (20 rats) for the detection of the time for reaching the maximal gastric acidity. Main examination group was composed of fasting group (30 rats), which was subdivided into control group (10 rats), cimetidine group (10rats), $Mylanta^{(R)}$ group (10 rats) and post?prandial group (30 rats), which was subaivided into 90 min group (10 rats), 90 min cimetidine group (10 rats), and 120 min group (10 rats). Retention ratio (%) of $TcO_4$ in the gastric wall and the pH of the gastric contents were measured in the extracted stomach of the six groups. Gastric wall retention ratio of $TcO_4^-$ was calculated by the gastric wall radioactivity (cpm) divided by total gastric radioactivity (cpm) at 30 mins after intravenous injection of 0.4 mCi of $TcO_4^-$. The results were as follows: 1) The time required for reaching stable $TcO_4$ retention ratio and the lowest gastric PH were 30 min and 90 min, respectively. 2) In the fasting group, the gastric wall retention ratio of $TcO_4^-$ was significantly increased in the cimetidine group, compared with the control group (P < 0.01). However there was no significant difference between the control and $Mylanta^{(R)}$ group 3) The $TcO_4^-$ retention ratios of 90 min and 120 min groups were lower than that of the fasting control group (p < 0.05), either. After administration of cimetidine, the retention ratio was significantly increased in 90 min group (p < 0.01). 4) While $TcO_4^-$ retention ratio and gastric pH were well correlated in the post-prandial 120 min group (r=0.7112, p<0.05), in the post-prandial 90 min and 90 min cimetidine groups correlated poorly. However, there was no correlation in the three fasting groups at all. Referring the above results, we infer that $TcO_4^-$ is secreted into the gastric lumen by both parietal and non-parietal cells, with dominant non-parietal $TcO_4^-$ secretion in the fasting state and dominant parietal $TcO_4^-$ secretion in the stimulated state.

• Restorative Dentistry and Endodontics
• /
• 제23권2호
• /
• pp.639-646
• /
• 1998

To evaluate the effect of interface conditions and retention grooves in the Class V composite resin restoration of the maxillary first premolar, the distribution of the values of stress and displacement was analyzed with the two-dimensional finite element method. The results were obtained as follows : 1. Boundary elements and Stiffness values could be used as the interface parameters in the, finite element method. 2. The amount of restriction of the displacement at the cervical margin by placing a retention groove at the cervical wall was about three times as high as that by placing a retention groove at the occlusal wall. 3. Because of the relative amount of tensile components of the stress values in the bucco-lingual direction, the possibility of dislocation of the restoration was much higher at the cervical margin than at the occlusal margin. 4. It might be recommended that both occlusal and cervical retention grooves be used routinely, but if one, it be placed at the cervical wall.

• 한국지반공학회논문집
• /
• 제20권9호
• /
• pp.57-64
• /
• 2004

절개사면에 설치된 앵커지지 흙막이벽의 설계법을 확립하기 위해서는 흙막이벽체 및 배면지반의 변형거동을 규명할 필요가 있다 따라서, 본 연구에서는 아파트 신축부지 절개사면의 보강을 위해 앵커지지 흙막이벽과 억지말뚝이 설치된 사면을 대상으로 계측을 수행하였다. 굴착단계별 앵커설치시 흙막이벽의 수평변위는 감소하고 상대적으로 배면지반의 변형은 증가하는 경향이 있다. 앵커력 도입시 흙막이벽의 수평변위는 전반적으로 감소하며, 앵커의 인장력은 흙막이벽의 변형에는 큰 영향을 미치지만 배면지반의 변형에 미치는 영향은 크지 않았다. 흙막이벽의 최대수평 변위는 굴착깊이의 $1~4\%$사이에 발생하며, 암반굴착면을 갖는 배면수평면인 앵커지지 흙막이벽의 최대수평변위보다 $2\~8$배정도 크게 발생된다. 한편, SLOPILE(Ver 3.0)프로그램을 이용하여 앵커지지 흙막이벽의 사면안정효과를 검토하였으며, 사면안정해석시 앵커지지 흙막이말뚝에 작용하는 측방토압은 배면수평면인 앵커지지 흙막이벽에 적용하는 경험토압의 평균값이 적용가능하다.

• Journal of the Korean Wood Science and Technology
• /
• 제20권4호
• /
• pp.57-64
• /
• 1992

The unique cell wall micropores of pulp fiber can be utilized as loading site in variety of important practical application which could be the basis of new papermaking technologies. One of these includes the manufature of paper containing higher levels of in situ filler precipitated. Hardwood pulp fiber were first impregnated with the solution of sodium carbonate($Na_2CO_3$). The micropores in cell wall of pulp fibers were filled with the liquid salt solution. The second calcium nitrate($Ca(NO_3)_2$) solution formed an insoluble calcium carbonate($CaCO_3$) precipitate within the cell wall micropores by interacting with the first sodium carbonate solution. The effects of chemical concentration and dryness of pulp fibers on the retention of cell wall micropore loaded filler were investigated. The paper properties of cell wall micropore loaded pulp fibers were compared with those of conventionally loaded and lumen loaded pulp fibers. Also the presense of the fillers within the cell wall micropore was observed by SEM. Increasing the chemical concentration to generate the calcium carbonate increased the retention of filler in cell wall micropore loaded pulp fibers. The particle size distribution of precipitated calcium carbonate ranged from $0.1{\mu}m$ to $80{\mu}m$. But, the average particle size of cell wall micropore loaded calcium carbonate was $4{\mu}m$. The paper made from never dried pulp fibers, the cell wall micropores which were filled with calcium carbonate, had better mechanical and optical properties than those of conventionally loaded or lumen loaded pulp fibers.

• 한국환경복원기술학회지
• /
• 제8권3호
• /
• pp.33-42
• /
• 2005

The bearing methods using pile of steel itself or reinforced concrete has been applying which in excavated depth was not deep. Also, the retaining wall as resisting structure to lateral force has taken weakness that the cure periods of concreted is long. Recently, with the material cost of steel, the application of cement is more increasing trend. In this study, the design methods of earth retaining and retention wall within the pre-casted concrete pile, PHC(Pretentioned spun High strength Concrete piles), was proposed which in the ground condition of excavated depth was not deep. The typical ground conditions, cohesive and non-cohesive soil, was considered as follows; soil strength as internal friction angle and UU(Undrained Unconsolidation triaxial test) strength, soil reaction and stabilization of structures. The application of design methods could be confirmed through the comparing and analyzing between measured data and utility software for the design.

• Nuclear Engineering and Technology
• /
• 제47권1호
• /
• pp.66-73
• /
• 2015

Background: A numerical simulation was carried out to investigate the difference between internal and external heat-flux distributions at the reactor vessel wall under in-vessel retention through external reactor vessel cooling (IVR-ERVC). Methods: Total loss of feed water, station blackout, and large break loss of coolant accidents were selected as the severe accident scenarios, and a transient analysis using the element-birth-and-death technique was conducted to reflect the vessel erosion (vessel wall thickness change) effect. Results: It was found that the maximum heat flux at the focusing region was decreased at least 10% when considering the two-dimensional heat conduction at the reactor vessel wall. Conclusion: The results show that a higher thermal margin for the IVR-ERVC strategy can be achieved in the focusing region. In addition, sensitivity studies revealed that the heat flux and reactor vessel thickness are dominantly affected by the molten corium pool formation according to the accident scenario.