• Journal of the Korean Geosynthetics Society
• /
• v.16 no.4
• /
• pp.57-66
• /
• 2017

Self-weight consolidation test and soil property of dredged soil at Incheon habour route were analyzed to determine the initial dredging reclamation amount, reclamation depth, and estimating the required time of self-weight consolidation with calculation of the final planned height of dredging reclamation site. The moisture content, void ratio and ratio of volume change with elapsed time after throwing were estimated through Yano's empirical equation. As a result, there was a less variation in elements when fine-grained soil content was low as similarly to the behavior of coefficient of sedimentation-consolidation, Cs and the highest variation was shown at the fine-grained soil content of 50%. The retention ratio according to the fine grained soil content that could reinforce the comprehensive aspect of retention ratio for each particle size presented in the standard of estimate for reclamation construction work was calculated and presented using the calculated ratio of volume change.

• Analytical Science and Technology
• /
• v.12 no.3
• /
• pp.203-208
• /
• 1999

The ion-pair high performance liquid chromatographic elution behavior of salicylic acid and its derivatives was studied with measuring capacity factor, k', changing the concentration of ion-pairing reagent (tetrabutylammonium chloride, TBACl) in mobile phase. As a result, it was found that k' of the samples increase at pH 7.2 as the TBACl concentration increases. The derivatives of salicylic acid were separated each other at an optimum mobile phase condition which was found from the observation of the retention behavior. The optimum mobile phase condition was methanol solution($MeOH:H_2O_2$ 30:70) containing 20 mM TBACl for the determination of salicylic acid and methanol solution($MeOH:H_2O_2$ 20:80) containing 40 mM TBACl for p-aminosalicylic acid at pH 7.2. The method has been applied for the analysis of the contents of salicylic acid derivatives in an aspirin tablet and a tuberculosis curing agent.

• Nuclear Engineering and Technology
• /
• v.54 no.6
• /
• pp.1947-1953
• /
• 2022

As the plasma facing material in the nuclear fusion reactor, tungsten has to bear the irradiation impact of high energy particles. The surface quality of tungsten may affect its irradiation resistance, and even affect the service life of fusion reactor. In this paper, tungsten samples with different surface quality were polished by mechanical processing, subsequently conducted by D₂⁺ implantation and thermal desorption. D₂⁺ implantation was performed at room temperature (RT) with the irradiation dose of 1 × 10²¹ D₂⁺/m² by 5 keV D₂⁺ ions, and thermal desorption spectroscopy measurements were done from RT to 900 K. In addition, He irradiation was also performed by 50 eV He⁺ ions energy with the fluxes of 5.5 × 10²¹ m^-2s^-1 and 1.5 × 10²² m^-2s^-1, respectively. Results reveal that the hydrogen/helium irradiation behavior are both related to surface quality. Samples with high surface quality has superior D₂⁺ retention behavior with less D₂ retained after implantation. However, such samples are more likely to generate fuzzes on the surface after helium irradiation. Different morphologies (smooth, wavy, pyramids) after helium irradiation also demonstrates that the surface morphology is related to tungsten crystallographic orientation.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.306-311
• /
• 2002

This paper propose a personalized defection detection and prevention procedure based on the observation that potential defectors have tendency to take a couple of months or weeks. For this purpose, possible states of customer behavior are determined from past behavior data using SOM (Self-Organizing Map). For the evaluation of the proposed procedure, a case study has been conducted for a Korean online game site. The result demonstestes that the proposed procedure can assist defection prevention effectively and detect potential defectors without deterioration of prediction accuracy comparison to prediction by MLP. Our procedure can be applied to various service industries that can capture fluent customer behavior data such as telecommunications, internet access services, and content services, too.

• Journal of Korea Soil Environment Society
• /
• v.2 no.1
• /
• pp.21-34
• /
• 1997

Retention ponds have been dug along some of the motorways in France to minimize environmental pollution by preventing pollutants from spreading over the surrounding area. A series of studies have been conducted to determine the physicochemical characteristics of the particles settling down in such a pond to evaluate the effectiveness of the pond as a trap for heavy metals such as Pb, Zn and Cd. The highly contaminated roadside soil and the uncontaminated background soil were also studied for comparison. The settling particles exhibited heavy metal concentrations of 2 to 8 times as much as the background Sologne soil, depending on the metal species. However, the heavy metal concentrations in the roadside soil were 7 to 26 times higher than those in the· settling particles. Sequential extraction experiments illustrated that the highly contaminated roadside soil consisted mainly of the readily soluble fractions (FII, FIII and FIV) for all three heavy metals, but little W which is hardly soluble. The proportion of W considerably increased up to one third of the total in the settling particles for Pb and Zn. This result as well as the large concentration differences between the roadside soil and the settling particles indicates that most of the heavy metals were lost to the surroundings even before reaching the retention pond. Cd exhibited somewhat different behavior in that the most soluble FI, which is negligible for Pb and Zn, occupied as much as one fourth of the total in the roadside soil. In addition, FV for Cd did not increase in the settling particles.

• Progress in Superconductivity and Cryogenics
• /
• v.9 no.2
• /
• pp.11-14
• /
• 2007

The critical current, $I_c$, degradation behaviors with bending strain were investigated in a commercially available YBCO coated conductor tape. In particular, the strain reversibility of $I_c$ and the influence of repeated bending on $I_c$ have been studied. Also, repeated bending at 77 K was done in order to understand the Ie behavior under cyclic bending strains. A reversible behavior of $I_c$ has been found up to a high bending strain of 1.60% for the RABiTS/MOD processed CC sample with copper reinforcement. Under repeated bending, the Ie showed a 95% $I_c$ retention up to 100 cycles for bending strains of 1.0% or less. The n-value behavior showed a good agreement with the $I_c$ degradation behavior, representing that any cracking did not occur on the YBCO film resulting from the reinforcement provided by the copper stabilizers.

• Clinical and Experimental Pediatrics
• /
• v.48 no.4
• /
• pp.355-362
• /
• 2005

Constipation is very common phenomenon during childhood that accounts approximately 3% of general pediatric outpatient visits and up to 25% of visit to the pediatric gastroenterologist. The diagnosis of functional constipation is based on the historical features and absence of physical abnormalities. Most infants and children with chronic constipation require no diagnostic tests. Constipation and subsequent fecal retention behavior often begins soon after experience of painful defecation. The effective management of childhood chronic constipation consist of education, prolonged support by physicians and parents, medications, and long term follow up.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.368.1-368.1
• /
• 2014

We proposed amorphous GeSe-based ReRAM device of metal-insulator-metal (M-I-M) structure. The operation characteristics of memory device occured unipolar switching characteristics. By introducing the concepts of valance-alternation-pairs (VAPs) and chalcogen vacancies, the unipolar resistive switching operation had been explained. In addition, the current transport behavior were analyzed with space charge effect of VAPs, Schottky emission in metal/GeSe interface and P-F emission by GeSe bulk trap in mind. The GeSe ReRAM device of M-I-M structure indicated the stable memory switching characteristics. Furthermore, excellent stability, endurance and retention characteristics were also verified.

• Computers and Concrete
• /
• v.4 no.3
• /
• pp.187-206
• /
• 2007

A rational three-dimensional nonlinear finite element model is described and implemented for evaluating the behavior of high strength concrete slabs under transverse load. The concrete was idealized by using twenty-nodded isoparametric brick elements with embedded reinforcements. The concrete material modeling allows for normal (NSC) and high strength concrete (HSC), which was calibrated based on experimental data. The behavior of concrete in compression is simulated by an elastoplastic work-hardening model, and in tension a suitable post-cracking model based on tension stiffening and shear retention models are employed. The nonlinear equations have been solved using the incremental iterative technique based on the modified Newton-Raphson method. The FE formulation and material modeling is implemented into a finite element code in order to carry out the numerical study and to predict the behavior up to ultimate conditions of various slabs under transverse loads. The validity of the theoretical formulations and the program used was verified through comparison with available experimental data, and the agreement has proven to be very good. A parametric study has been also carried out to investigate the influence of different material and geometric properties on the behavior of HSC slabs. Influencing factors, such as concrete strength, steel ratio, aspect ratio, and support conditions on the load-deflection characteristics, concrete and steel stresses and strains were investigated.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1986.12a
• /
• pp.510.1-510
• /
• 1986

Many enzymes require the participation of readily dissociable coenzymes as NAD for thir catalytic activities. The continuous utilization of the enzymes requires the retention and regeneration of the coenzymes. For this purpose, several kinds of macromolecular NAD derivatives have been prepared by covalently attaching NAD to watersoluble polymers. We have prepared poly (ethylene glycol)-bound NAD (PEG-NAD) by coupling N$\^$6/-(2-carboxyethyl)-NAD to one terminal of ${\gamma}$ $\omega$-diaminoly (ethylene glycol) (Mr 3000) with water-soluble carbodiimide. PED-NAD thus obtained has one NAD moiety located at a terminal of the linear, flexible and hydrophilic chain of poly (ethylene glycol). PED-NAD has good coenzyme activity for various dehydrogenases and is applicable in a continuous enzyme reactor. To use these macromolecular NAD derivatives in an enzyme reactor, it si necessary to understand the behavior of the system in which the reactions of dehydrogenases are coupled by the recycling of the NAD derivative. We investigated the kinetic properties of a continuous enzyme reactor containing lactate dehydrogenase, alcohol dehydrogenase and PEG-NAD. The steady-state behavior of the enzyme reactor is explained by a simple kinetic model.