• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.1
• /
• pp.17-24
• /
• 2005

This study was carried out to investigate the removal efficiency of an intermittently aerated nonwoven fabric filter bioreactor fed continuously with domestic sewage. The hydraulic retention time(HRT) of the reactor was reduced from 12 hrs to 10 hrs to 8 hrs during an experimental period of 17 months. In order to search an optimum aeration/nonaeration time ratio for the nitrogen removal at each HRT, the cycle times of 3, 2 and 1 hr were tested at the aeration/nonaeration time ratio of 1. Then, the aeration/nonaeration time ratio was changed from 50 min/70 min to 40 min/80 min to 30 min/90 min at the cycle time of 2 hr which showed the best nitrogen removal. During the experimental period, the effluent SS concentration was always below 1.2 mg/L with more than 95% of BOD removal efficiency. The highest nitrogen removal of 90.1% was observed at the aeration/nonaeration time ratio of 40 min/80 min at the HRT of 10 hr. Oxidation-reduction potential could represent the degree of the nitrification and denitrification reaction in the reactor.

• Journal of Aquaculture
• /
• v.10 no.3
• /
• pp.335-346
• /
• 1997

Denitrification is one of the important processes of removing nitrate from in recirculating aquaculture systems. And this process is affected by many factors such as external organic carbon sources, hydraulic retention time (HRT), COD/NO3--N (C:N) ratio, etc. However, not many studies were done for the optimum conditions of denitrification in the recirculation system for aquaculture. Therefore, this study was conducted to find out the optimum removal condition of NO3--N using submerged denitrification biofilter. The combinations of two external organic carbon sources (glucose and methanol), two HRT (4 and 8-hour) and four differnent C : N ratios (3, 4, 5, 6) were tested. The removal efficiencies of NO3--N and total inorganic nitrogen (TIM) at 8-hour HRT were better than those at 4-hour's (P<0.05). The maximum removal efficiency of NO3--N by methanol (97.8%) was achieved at HRT and C : N ratio were 8-hour and 4.0 respectively. The efficiencies of methanol for the removal of NO3--N and TIN were always better than those of glucose (P<0.05). The maximum removal efficiencies of total inorgainc nitrogen (TIN) were gained at C : N ration of 5.0. The maximum removel efficiencies of TIN using methanol and glucose were 96.9% and 71.5% respectively. Anaerobic condition which is necessary for denitrification process was not made until the 8-hour HRT and higher C : N ratio (5.0). Removal of NO3--N at 4-hour HRT and C : N ration lower than 5.0 were inhibited by oxygen and/or low quantity of external organic carbon. Removal efficiencies of NO3--N were also inhibited by high C : N (6.0) ratio when HRT was 8-hour.

• Nutritional Sciences
• /
• v.2 no.2
• /
• pp.76-81
• /
• 1999

Sodium restricted diets are known to lower blood pressure in salt sensitive, hypertensive patients. Thare is increasing evidence that potassium plays an important role as a protective factor in the regulation of blood pressure. The objective of the current study was to measure parameters of sodium, potassium, and chloride utilization as affected by feeding of substantial quantities of bread made from whole ground white torn meal, whole ground yellow corn meal, and whole ground wheat flour. The breads provided 40 percent of a caloric content of the constant, measured laboratory diet. The 28-day study was divided into an introductory period of 7-days and three experimental periods of 7-days each. Order of assignment to specific treatments for 12 healthy subjects were according to a complete randomized block design. Yellow corn bread diets resulted in the highest potassium retention (243 mg/day) and the lowest urinary sodium and potassium ratio (1.53 $\pm$ 0.26) numerically in comparison to the other test breads. The excretions of sodium and chloride were higher during controlled feeding periods than during the self-selected diet period(p < 0.05). This indicates a response to the higher intake of these electrolytes from the experimental diets than from self-selected diets. There was no significant difference in the effect of white corn bread, yellow corn bread, or whole wheat bread diet on electrolyte status in humans. However, the yellow corn bread diet resulted in a somewhat more favorable urina교 sodium to potassium ratio than that from white corn bread or whole wheat bread diet.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.12
• /
• pp.1777-1781
• /
• 2003

The lysine requirements of juvenile yellowtail flounder (Pleuronectes ferrugineus) having 19.5 g initial body weight were estimated by feeding six practical-type diets containing graded levels of lysine (1.21 to 2.69% of dry diet). Dietary amino acid profile simulated that of whole body of yellowtail flounder. Most of amino acids in the diets were provided by corn gluten meal, herring meal and gelatin. Protein efficiency ratio (PER) improved significantly until lysine level increased up to 2.1% (4.3% of protein). Same trend was observed in feed:gain ratio (FGR) which maintained constant in fish groups fed diets containing lysine above 2.1%. The highest nitrogen gain (0.34 g/fish) in whole body was found in fish fed 2.1% lysine, though the value was not different from those of fish fed above the level of lysine. Fish fed 2.1% lysine also showed the best nitrogen retention efficiency of 24.6%. The broken-line analysis of protein efficiency ratio and body nitrogen gain against dietary lysine level yielded an estimated lysine requirement of 2.2% (4.5% of protein) and 2.3% (4.7% of protein), respectively.

• Journal of environmental and Sanitary engineering
• /
• v.4 no.1 s.6
• /
• pp.43-52
• /
• 1989

A synthetic wastewater composed of powdered baby food and inorganic nutrients was treated by five 3.6L anaerobic reactors in order to test the relationship between solids retention time (SRT) and media surface ratio, and the removal efficiencies of organic substrate. Of the five reactors, four were semi-continuously fed stirred-tank reactors and one continuously-stirred batch reactor. The influent was 7430mg/L in COD, 7120 mg/L $BOD_L$ and 6350mg/L in $BOD_5$, respectively. Operating temperature was $35{\pm}1^{\circ}C$ and pH in the range 6.9 to 7.2. In this experimental study it was found that a linear relationship existed, within the experiment range, between SRT and media surface ratio, and that SRT and removal efficiency increased with increasing media surface ratio. The substrate removal efficiencies were 82.7 to $88.2\%$ in COD, 82.9 to $88.4\%$ in $BOD_L$ and 83.3 to $88.7\%$ in $BOD_5$, respectively.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.6
• /
• pp.63-70
• /
• 2014

Part of SB latex in pre-coating color was substituted with newly developed starch-based bio-binder in order to investigate the effect of starch-based bio-binder in pre-coating color on the properties of coating color and coated paper. Smoothness and gloss of coated paper were decreased with the increase of bio-binder substitution ratio. Brightness and whiteness did not show the significant changes, but stiffness was improved with bio-binder. Ink set-off, dry-pick and wet pick were decreased with the increase of bio-binder substitution ratio. In general, when all SB latex is substituted with bio-binder, ink set-off, dry- and wet-pick were deteriorated. However, it was found that if the bio-binder substitution ratio is controlled below 50%, similar qualities with coated paper manufactured by the use of SB latex binder can be obtained.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.2
• /
• pp.171-178
• /
• 2015

Selectivity and by-catch are the main features used to define fish catch for fisheries management or to determine fishing gear efficiency. A fish girth distribution analysis was carried out to determine the retention rate of juveniles discarded and to establish common selectivity for a multispecies catch. Total body length, body weight, and girth of juvenile fish retained in the cod-end and cover net separately were collected using an 18-mm mesh cover net during 12 fishing trials with a 41-mm cod-end beam trawl. The by-catch weight ratio in the cod-end was twice that of the by-catch ratio in number. The 50% selectivity of body length and 50% girth of redfin velvet fish were not significantly different between the cod-end and cover net, whereas those of other fish species were significantly different between the cod-end and cover net. The difference in 50% selectivity girth of other fish between the cod-end and cover net was similar between cod-end mesh size and cover net mesh size. Furthermore, the difference in 50% body length selectivity of other fish between the cod-end and cover net was almost double the difference in girth. Girth selectivity in a multispecies catch using towed fishing gear was effectively used to determine fish and net mesh size.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.1
• /
• pp.65-73
• /
• 1986

Experiment have been conducted about thin oxide characteristics according to O2/N2 ratio needed for EEPROM cell fabrication. As a result, we think that there is no problem even if we grow oxide layer with large O2/N2 ratio and short exidation time and when the water is implated by As before oxidation, the oxide breakdown field is about IMV/cm lower than that is not implanted. Especially, the thin oxide characteristic seems to be affected largely by wafer cleaning and oxidation in air. On the basis of these, tunnel type EEPROM cell is fabricated by 3um CMOS process and its characteristic is studied. Tunnel oxide thickness(100\ulcorner is chosen to allow Fowler-Nordheim tunneling to charge the floating gate at the desired programming voltage and tunnel area(2x2um\ulcorneris chosen to increase capacitive coupling ratio. For program operation, high voltage (20-22V) is applied to the control gate, while both drain and source are gdrounded. The drain voltage for erase is 16V. It is shown that charge retention characteristics is not limited by leakage in the oxide and program/erase endurance is over 10E4 cycles of program erase operation.

• Journal of the Korean Ceramic Society
• /
• v.31 no.6
• /
• pp.637-642
• /
• 1994

Using SHS(Self-propagating High-temperature Synthesis) method, the optimum synthetic condition of titanium carbonitride was established by controlling the parameters such as relative density of mixture (Ti+C), nitrogen pressure, additive amounts of titanium hydride(TiH1.924) and protecting heat loss. Under 1 atm nitrogen pressure, nitridation ratio with changing relative density of the sample compacts has a maximum (87.2%) at about 55%, and in the case of enveloping the pellet with a quartz tube, the highest nitridation ratio of 90% was obtained at about 68%. At relative density of 55%, nitridation ratio with the nitrogen pressure has a miximum (87.3%) at 7 atm. As the amounts of additive titanium hydride increased, nitridation ratio decreased at below 7 atm nitrogen pressure and, increased at above this pressure until percent of addition percent reached 15 wt% and decreased abruptly upon futher increases in titanium hydride. In the synthesis of TiCxNy by combustion reaction, heat transfer from combustion zone to preheating zone and nitrogen gas penetration into the compact were found to be important factors affecting the TiCxNy formation. It was difficult to obtain high nitridation ratio when the conbustion temperature was either too high or too low, and it seems that the retention of high temperature after a combustion wave sweeped through the reactant mixture pellet is critical to obtain a satisfactory nitridation ratio.

• Resources Recycling
• /
• v.30 no.6
• /
• pp.12-18
• /
• 2021

The water-gas shift reaction is the subsequent step using steam for hydrogen enrichment and H₂/CO ratio-controlled syngas from gasification. In this study, a water-gas shift reaction was performed using syngas from an RPF gasification system. The water-gas shift using a catalyst was performed in a laboratory-scale tube reactor with a high temperature shift (HTS) and a low temperature shift (LTS). The effects of the reaction temperature, steam/carbon ratio, and flow rate on H₂ production and CO conversion were investigated. The operating temperature was 250-400℃ for the HTS system and 190-220℃ for the LTS system. Steam/carbon ratios were between 1.5 and 3.5, and the composition of reactant was CO : 40 vol%, H₂ : 25 vol%, and CO₂ : 25 vol%. The CO conversion and H₂ production increased as the reaction temperature and steam/carbon ratio increased. The CO conversion and H₂ production decreased as the flow rate increased due to reduced retention time in the catalyst bed.