• Journal of the korean Society of Automotive Engineers
• /
• v.15 no.2
• /
• pp.130-143
• /
• 1993

Engineering ceramics have some excellent properties as the material for the mechanical components. It is, however, very difficult to grind ceramics with high efficiency because of their high strength, hardness and brittleness. In this paper, experiments are carried out to obtain the effect of "In-process dressing" to grind the Engineering ceramics with high efficiency. To save running time for dressing process and obtain restraint effect of diamond grain wear, "In-process dressing" system using WA stick type honing stone is proposed. Representative Engineering ceramics, such as AI$_{2}$O$_{3}$, Si$_{3}$N$_{4}$, are ground with diamond wheel. Also bending strength test is carried out to check upward tendancy of mecahnical properties as the result of machining defact restraint through the grinding machining method using "In-process dressing" process. Some results obtained in this study provide useful information to attain the high efficiency grinding and the high mechanical properties of Engineering ceramics.rties of Engineering ceramics.

• Journal of Auto-vehicle Safety Association
• /
• v.5 no.2
• /
• pp.45-50
• /
• 2013

The whiplash Injuries due to rear collision occur frequently. As result, in many countries, seat performance is being assessed and developed to improve head whiplash injury in rear collision of passenger car. This study compares whiplash assessment methods in each country. Using the DFSS(Design for Six Sigma) method, the correlation between influence parameters of head restraints and whiplash injury criteria is analyzed. Four control factors are used in this study. And total 11 whiplash injury criteria from NCAP(New Car Assessment Program) of Korea, Europe, China and IIHS(Insurance Institute for Highway Safety) of USA are used for output response. By the experimental design, L9 orthogonal coordinate system is configured and is tested by sled test equipment, twice. By using average assay value and ANOVA, the correlation between control factors and injury criteria has been comprehended. Optimization design of head restraint according the regional seat safety assessment was derived through the correlation.

• Journal of Korean Medicine for Obesity Research
• /
• v.18 no.2
• /
• pp.115-127
• /
• 2018

Objectives: People often fail to reduce or maintain their weight despite trying to lose weight. The purpose of this study was to review previously published study results of the predictive factors associated with weight loss in obesity treatment. Methods: Authors searched for the articles related to weight loss, published from 2007 to 2017 found on PubMed, Scopus, Research Information Sharing Service (RISS), and Koreanstudies Information Service System (KISS). A total of 43 articles were finally selected. From the study results, unchangeable and changeable predictors were extracted, and these predictors were examined according to detailed categories. Results: Predictors of weight loss in obesity treatment included genetic and physiological factors, demographic factors, history of treatment on obesity related factors, behavioral factors, psychological factors and treatment process related factors. The main factors of weight loss were unchangeable predictors such as high initial degree of obesity and younger age, and changeable predictors such as dietary restraint, regular exercise, self-efficacy, initial weight loss and attendance. Especially dietary restraint, regular exercise, successful initial weight loss and high attendance were considered to be dominant factors for weight loss treatments. Conclusions: Our review results suggest that unchangeable and changeable predictors of weight loss should be carefully examined during treatments of obesity.

• Advances in Computational Design
• /
• v.6 no.1
• /
• pp.55-75
• /
• 2021

The lightweight superstructure is beneficial for bridges in remote areas and emergency erection. In such weight-sensitive applications, the combination of fiber-reinforced polymer (FRP) as a material and box-beams as a structural system have enormous scope. This combination offers various advantages, but as a thin-walled structure, their designs are often governed by buckling criteria. FRP box-beams lose their stability either by flange or web buckling mode. In this paper, the web buckling behavior of simply supported FRP box-beam subjected to transverse load has been studied by modeling full box-beam to consider the effect of real state of stress (stress variation in length direction) and boundary conditions (rotational restraint at web-flange junction). A parametric study by varying the sectional geometry and fiber orientation is carried out by using ANSYS software. The accuracy of the FE models was ensured by verifying them against the available results provided in the literature. With the help of developed database the influential parameters (i.e., αs, βw, δw and γ) affecting the web bucklings are identified. Design trends have been developed which will be helpful to the designers in the preliminary stage. Finally, the importance of governing parameters and design trends are demonstrated through pedestrian bridge design.

• Structural Engineering and Mechanics
• /
• v.82 no.2
• /
• pp.233-244
• /
• 2022

Following a loss of control, the impact against a road barrier in a turn predominates among the most severe motorcyclist accidents. These road restraint devices can be equipped with a motorcycle screen, the function of which is to restrain the rider and minimize the consequences of the impact in terms of the severity of injuries. The performance of these screens is evaluated by the European normative procedure EN1317-8, which specifies the test conditions, based on one or two configurations. In practice, however, these impact conditions are very diverse, difficult to extrapolate from accident analysis and therefore poorly investigated. This study is interested in improving knowledge of these impact conditions in terms of impact speed, impact angle and particularly position of the rider. A finite element model has been developed to simulate the dynamic behavior of the rider from loss of control to impact on the screen. Statistical analysis of the results shows a high variability of the impact conditions, in particular with regard to the direction of turn (to the right or to the left). Some improvements are suggested in order to overcome the limitations inherent in standard procedures.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.2
• /
• pp.178-189
• /
• 1993

Engineering ceramics have some excellent properties as the material for the mechanical components. It is, however, very difficult to grind ceramics with high efficiency because of their high strength, hardness and brittleness. In this paper experiments are carried out to obtain the effect of "In-process dressing" to grind the Engineering ceramics with high efficiency. To save running time for dressing process and obtain restraint effect of diamond grain wear, "In-process dressing" system usint WA stick type honing stone is proposed. Representative High Strength Engineering ceramics A1$_{2}$O$_{3}$ and Si$_{3}$N$_{4}$are ground with diamond wheel. Also bending strengrh test is carried out to check upward tendancy of mecahnical properties as the result of machining defact restraint through the grinding maching method using "In-process dressing" process. Some results obtained in this study provide useful information to attain the high efficency grinding and the high mechanical properties of Engineering ceramics.rties of Engineering ceramics.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.157.2-157
• /
• 2001

This paper describes the synergism of Artificial Neural Network and Fuzzy Logic based approach to improve the reliability of transformer differential protection, the conventional transformer differential protection commonly used a harmonic restraint principle to prevent a tripping from inrush current during initial transformer´s energization but such a principle can not performs the best optimization on tripping time. Furthermore, in some cases there may be false operation such as during CT saturation, high DC offset or harmonic containing in the line. Therefore an artificial neural network and fuzzy logic has been proposed to improve reliability of the transformer protection relay. By using EMTP-ATP the power transformer is modeled, all currents flowing ...

• The Korean Society of Law and Medicine
• /
• v.19 no.2
• /
• pp.75-98
• /
• 2018

Recently, the antitrust tribunal of Seoul High Court revoked the disposition of Korea Fair Trade Commission(hereafter 'KFTC'). While KFTC determined that the restriction of Korea Pediatrician Association violated article 26 of the Monopoly Regulation and Fair Trade Act(Korean antitrust law), Seoul High court viewed that KFTC failed to prove the compulsory measures and the restraint of competition required in article 26. The 'restriction' of article 26 should be interpreted as 'excessive restriction'. Since entrepeneurs' organization is allowed to limit its member's activities, KFTC could regulate entrepeneurs' organization on a very exceptional basis. In addition, though entrepeneurs' organization did not use compulsory measures to enforce its resolution, its 'excessive restriction' could fit into the notion of 'restriction' of article 26. Under the current medical care system, the price of medical care is decided by Korean government. Therefore the restriction of Korea Pediatrician Association is not likely to have effect on the price. However, the resolution of Korea Pediatrician Association was aimed to decrease the supply of medical care. Therefore the resolution is capable of having effect on the competition. In this sense, though KFTC failed to submit direct evidence to support the decrease of quantity, there could be possibility of restraint of competition. The Seoul High Court's decision has important implications. The leading case on restraint of competition(Supreme Court 2002Du8628, Posco case) was delivered in 2007. However the remaining issue such as the standard and scope of restraint of competition is not clear. Through reappeal case of this decision, Supreme Court has to decide the line between competition and its restraint.

• The Korean Society of Law and Medicine
• /
• v.17 no.2
• /
• pp.177-219
• /
• 2016

A commercial advertisement is not only a way of competition but also a medium of communication. Thus, it is under the constitutional protection of the freedom of business (article 15 of the Constitution) as well as the freedom of press [article 21 (1) of the Constitution]. In terms of the freedom of business or competition, it should be noted that an unfair advertising (false or misleading advertisement) can be regulated as an unfair competition, while any restraint on advertising other than unfair one might be doubted as an unjustifiable restraint of trade. In terms of the freedom of press or communication, it is important that article 21 (2) of the Constitution forbids any kind of (prior) censorship, and the Constitutional Court applies this restriction even to commercial advertising. In this article, the applicability of these schemes to advertising of the so-called learned professions, especially physician, are to be examined, and some proposals for the reformation of the current regulatory regime are to be made. Main arguments of this article can be summarized as follows: First, the current regime which requires advance review of physician advertising as prescribed in article 56 (2) no. 9 of Medical Act should be reformed. It does not mean that the current interpretation of article 21 of the Constitution is agreeable. Though a commercial advertising is a way of communication and can be protected by article 21 (1) of the Constitution, it should not be under the prohibition of censorship prescribed by article 21 (2) of the Constitution. The Constitutional Court adopts the opposite view, however. It is doubtful that physician advertising needs some prior restraint, also. Of course, there exists severe informational asymmetry between physicians and patients and medical treatment might harm the life and health of patients irrevocably, so that medical treatment can be discerned from other services. It is civil and criminal liability for medical malpractice and duty to inform and not regulation on physician advertising, to address these differences or problems. Advance review should be abandoned and repelled, or substituted by more unproblematic way of regulation such as an accreditation of reviewed advertising or a self-regulation preformed by physician association independently from the Ministry of Health and Welfare or any other governmental agencies. Second, the substantive criteria for unfair physician advertising also should correspond that of unfair advertising in general. Some might argue that a learned profession, especially medical practice, is totally different from other businesses. It is performed under the professional ethics and should not persue commercial interest; medical practice in Korea is governed by the National Health Insurance system, the stability of which might be endangered when commercial competition in medical practice be allowed. Medical Act as well as the condition of medical practice market do not exclude competition between physicians. The fact is quite the opposite. Physicians are competing even though under the professional ethics and obligations and all the restrictions provided by the National Health Insurance system. In this situation, regulation on physician advertising might constitute unjustifiable restraint of competition, especially a kind of entry barrier for 'new physicians.'

• Journal of Aerospace System Engineering
• /
• v.12 no.4
• /
• pp.9-17
• /
• 2018

With an aim of considering the warping restraint effect, the results of the comparative study for several cases on the correction of the warping functions for the theoretical analysis of composite thin-walled beams with chord wise asymmetric closed cross-sections are presented in this study. To solve this problem, it is necessary to correct the warping function so as to satisfy the warping equilibrium condition like 1) without moving the position of the pole, 2) with only modifying the shape function using the existing pole, and 3) with moving the position of the pole. The cross-sectional characteristics of the cases were compared with each other. Finally, the cases were compared in order to correct the warping functions. The case 2) was observed to be more speedy and simple in computation compared to others.