• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.9
• /
• pp.1674-1680
• /
• 2009

This paper proposes an autonomous fault determination, fault zone isolation and fault restoration strategy based on the ethernet communication as a new attempt to solve the problem the of the existing central control method. In proposed method, The FRTU(Feeder Remote Terminal Unit)s on the feeder determines autonomously where the faulted zone is by exchanging the voltage and current information with neighbor FRTUs based on the network communication, and then separates the faulted zone in an nil-voltage status to make the protective device to reclose successively. In particular, the minimization of outage time and relational load balancing is archived by each interconnection switch which determines autonomously the load zone to be allocated among those zones after the sound outage zones was separated individually. Finally, to show effectiveness of the proposed fault restoration strategy, the several fault cases are simulated for the test distribution system, and the load balancing index of the proposed solution is compared with all of feasible solutions.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.2
• /
• pp.42-51
• /
• 2010

Herbs and shrubs are employed for environmental restoration purposes. Among common herbs and shrubs, few species with low germination rates were selected and studied for enhanced germination rates and decreased germination times via soaking treatment. Rhus chinensis, incubator grown samples treated with the bacterial solution for 72hrs followed by immediate seeding showed the highest germination rate of 26.7% and germination period of 5.7 days, 3 days decrease from the control. Treatment of distilled water (t=3.79, p<0.01), nutrient broth (t=4.44, p<0.00) and bacterial solution (t=4.42, p<0.00) showed highly significant difference. In the case of soil tests, treating in the nutrient broth for 72 hrs followed by immediate seeding yielded the the highest germination rate of 23.3% with 7.3 days to initial germination, a decrease of 14.7 days with respect to the control. All the samples followed by immediate seeding showed significant difference (t=2.13, p<0.05). Incubator grown samples of Lespedeza cyrtobotrya showed different results. The incubator samples suspended for 48 hrs in distilled water followed by immediate seeding and 1 day drying displayed the highest germination rate of 96.7%, surpassing that of the control by 33.4%. The incubator samples treated with the distilled water and nutrient broth showed enhanced germination. But only the samples treated with distilled water and nutrient broth for 48hrs showed the increased germination in soil tests. All the sample treated for 24 hrs followed by immediate seeding or dried for 1 day showed initial germination as early as 1 day in incubator. The initial germinations were shortened in the samples treated with distilled water and nutrient broth for 48hrs in soil tests. Lespedeza cuneata incubator sample treated with nutrient broth for 24 hrs and dried for 1 day exhibited the highest germination rate of 83.3%, a 31.1% improvement over the control. The incubator samples treated with distilled water for 48 hrs (t=4.20, p<0.01) showed effective increase of germination. The treatment of distilled water (t=2.96, p<0.05) and bacterial solution (t=2.24, p<0.05) showed significant difference. The germination rates in soil were less than those of incubator and the control. The incubator samples treated with distilled water and bacterial solution displayed 1 day germination period, shortened by 1.3 days compared to the control. For soil grown samples, the samples treated with distilled water showed delayed initial germination and those treated with nutrient broth for 48hrs and bacterial solution for 72hrs shortened initial germination.

• 보존과학연구
• /
• s.28
• /
• pp.5-19
• /
• 2007

The annals of Joseon Dynasty is the most valuable resource containing the record of Korean history and has been known as one of the UNESCO's Memory of the World Register. There was a period that the annals of Joseon Dynasty was used with beeswax to control pests. It is considered as the prior reason of damage on the annals of Joseon Dynasty. Therefore, in this study we examined the restoration paper(Hanji) as the solution of damage in the waxed volume of the annals of Joseon Dynasty. FT-IR spectrometer was used to examine traditional paper inside and outside of Korea and accelerated artificial aging paper. As a result of FT-IR analysis, spectrum did not showed its big difference in all paper used in this study. However, there was a different spectrum in paper which was made with not Broussonetia kazinoki, but Echinochloa crus-galli var. frumentacea and Dioscorea batatas. Among traditional papers in various countries, spectrum of Korean paper showed the most similarity from the annals of Joseon Dynasty. In comparison between accelerated artificial aging paper and waxed volume, we could identify the change of spectrum affected by the damage.

• Restorative Dentistry and Endodontics
• /
• v.26 no.2
• /
• pp.162-170
• /
• 2001

The purpose of this study was to investigate the effect of cavity configurations on the marginal leakage of class 5 glass ionomer cement and composite resin restorations. Four types of cavities such as saucer shape. notch shape. combined shape(notch shape occlusally and saucer shape gingivally). and U shape were prepared on the buccal and lingual surfaces of 80 extracted premolars(40 cavities for each shape). Occlusal cavity margins were placed at enamel and cervical margins were placed at dentin. 10 cavities of each shape were restored with Ketac Fil as a conventional glass ionomer cement. Fuji II LC improved as a resin modified glass ionomer cement, Z 100 as a hybrid composite resin. and Tetric Flow as a flowable composite resin (40 cavities for each material). After thermocycling, teeth were immersed in 5% basic fuchsin solution for 6 hours and sectioned longitudinally in a buccolingual direction through the center of the restoration. The dye penetrations at the tooth restoration interface were examined by stereomicroscope. The Result were as follows 1. In saucer shape, notch shape and combined shape, composite resin restorations showed lesser leakage than glass ionomer restorations(p<0.05) and in U shape. Tetric Flow showed the least marginal leakage and others were decreased as Z 100. Fuji II LC improved, Ketac Fil in that order. There were statistically significant difference between Tetric Flow and Fuji II LC improved. Ketac Fil and between Z 100 and Ketac Fil(p<0.05). 2. In Ketac Fil restoration group, saucer shape showed the highest marginal leakage and U shape showed the least marginal leakage and others were decreased as notch shape, combined shape in that order. There were statistically significant difference between saucer shape and combined shape, U shape and between notch shape and U shape(p<0.05). 3. In Fuji II LC improved restoration group, U shape showed the least marginal leakage. There were statistically significant difference between U shape and other three shapes(p<0.05). 4. The cavity configuration had no significant effect on marginal leakage of composite resin restorations(p>0.05).

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.8
• /
• pp.678-684
• /
• 2008

A general treatment is to restore abfraction lesions with dental filler materials to reduce stress concentration. A material should be selected from various dental products based on long term experiences of dentist or personal preference concerning filler methods. A quantitative criterion is necessary to make an evaluation of the results as dentists decide treatment methods and dental materials relying on their clinical experiences. The purpose of this study is to find an optimal restoration method and material for noncarious cervical lesions using the finite element method. An objective function was defined to minimize the sum of tension or compression stress. Trial-and-error and approximation were used to find an optimal restoration method. An optimal solution was to fill TetricFlow inside the lesion and Z100 in the remaining region. The most desirable thickness ratio of the two filler materials was 0.125 with trial-and-error and it was similar to the results of approximation, 0.121 and 0.132.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11C
• /
• pp.1073-1078
• /
• 2007

In this paper, we propose an iterative mixed norm image restoration algorithm using multi regularization parameters. A functional which combines the regularized $l_2$ norm functional and the regularized $l_4$ norm functional is proposed to efficiently remove arbitrary noise. The smoothness of each functional is determined by the regularization parameters. Also, a regularization parameter is used to determine the relative importance between the regularized $l_2$ norm functional and the regularized $l_4$ norm functional using kurtosis. An iterative algorithm is utilized for obtaining a solution and its convergence is analyzed. Experimental results demonstrate the capability of the proposed algorithm.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.11
• /
• pp.1584-1589
• /
• 2012

The grid-interconnected microgrid can be able to operate with and without the utility microgrid to supply electricity. when the microgrid operates in grid-connected mode, the frequency of the microgrid synchronizes with the system frequency. In this case, the frequency of the microgrid has small variation which is able to change the output of distributed generation with a droop controller. Thus, the small variation of frequency can make the distributed generation generate unnecessary electricity consistently. In this paper, we propose a frequency droop control with a dead band so as to prevent the distributed generations from generating unnecessary output while in grid-interconnected mode. In addition, a distributed generation can have a restoration control to restore the frequency changed by a droop control as a rated frequency. Also, we state the problem of restoration control with a dead band, and propose its solution when the microgrid operates in stand alone mode. We simulate the proposed droop control using PSCAD/EMTDC to verify the validity of the control.

• Computers and Concrete
• /
• v.12 no.4
• /
• pp.553-563
• /
• 2013

The present study aims to show how the problem of reproducing, as closely as possible, binders of historic mortars by mixing raw materials which are commercially available, can be formulated as a linear optimization problem. The study points out that by mixing five standard raw materials (end-members) it is possible to obtain mortar binders with the almost same chemical compositions of those determined on the historic and archaeological mortar samples studied in some recent scientific papers. An advanced function of the Microsoft Excel spreadsheet, the Solver add-in, was used for the calculation of the right amount of each raw material to be mixed for producing the new binders. This approach could be useful to provide an optimal solution in the process of restoration of ancient monuments, where it is necessary to replace the historic mortars with new highly compatible repair mortars.

• Restorative Dentistry and Endodontics
• /
• v.10 no.1
• /
• pp.63-70
• /
• 1984

It was the purpose of this study to determine the galvanic current between a gold alloy inlay and four types of amalgam using the circuit through pulp chambers when the freshly extracted teeth with those restorations were brought into contact in a physiologic saline solution, and to investigate the effectiveness of cavity varnish or ammonated silver-nitrate on the surface of amalgam restoration in reducing galvanic current. The current was measured with current-to-voltage converter and recored on a physiograph 6630-257. The following results were obtained. 1. Generally, galvanic current decreased as the time elapsed. 2. Galvainc current decreased significantly in the first day and after then minimal change was observed until 30th day. 3. Initial galvanic current was 29.6 ${\mu}A$ in the cut amalgam and 24.5 ${\mu}A$ in Dispersalloy amalgam and after then the current was significantly decreased. 4. Initial galvanic current was 12.6 ${\mu}A$ in spherical amalgam (low copper amalgam) and 13.8 ${\mu}A$ in Tytin amalgam and the amount of change was lower in sperical amalgam and Tytin amalgam than that in lathe cut amalgam and Dispersalloy amalgam. 5. Painting ammoniated silver-nitrate or Copalite on the surface of amalgam resotration decreased initial galvanic current and ammoniated silver-nitrate is more effective in decreasing galvanic current than Copalite. 6. Galvanic current by contact between amalgam restoration and gold restoration increased abruptly and dropped rapidly becoming almost.

• Journal of Chest Surgery
• /
• v.23 no.1
• /
• pp.9-15
• /
• 1990

This study was designed to investigate the protective effect of chlorpromazine against the reperfusion injury of myocardium after high potassium cardioplegic arrest. Langendorff`s preparations of rat heart were infused with high potassium cardioplegic solution[St. Thomas Hospital Solution] at 25oC. Chlorpromazine [10-7Ｍ] increased the recovery of myocardial contractility[dp/dt], left ventricular pressure[LVP], and coronary flow rate of the reperfused heart. Both in control and experimental groups, the restoration of myocardial activity could not reach to the level of preplegic control. These results suggest that the etiologic factors of the reperfusion injury include the influence of high potassium cardioplegic solution and/or reperfusion itself, and that chlorpromazine protects myocardium from the reperfusion injury.