• Journal of the korean academy of Pediatric Dentistry
• /
• 제26권4호
• /
• pp.636-643
• /
• 1999

Ectodermal dysplasia is a genetic birth defect in which at least abnormally develop two structures derived from the ectoderm. It is usually inherited in autosomal dominant or autosomal recessive pattern. Oral manifestations are oligodontia, anodontia, dysmorphic teeth(conical shape), decreased occlusal vertical dimension and alveolar bone. Extraoral signs may include decreased or absent sweat glands, sparse and fine hair, saddle nose, hearing loss and decreased production of body fluids including saliva. Most affected children require extensive dental treatment to restore their appearance and help the development of a positive self image. The patient's overclosed profile was due to a decreased vertical dimension. The use of overdenture is to preserve erupted teeth, to accomodate the newly constructed occlusal plane, to improve retention and stability of denture and to maintain the remaining alveolar bone. The restoration of vertical dimension improved the child's speech, swallowing, and eating. Growth continue until the age of approximately 18. As child grows, replacement dentures will have to be fabricated primarily to accomodate increasing vertical dimension and changing dentition. Implants may be indicated later if the alveolar bone is adequate. Periodic recall visits are advised, to monitor the dentures during periods of growth and development, and eruption of the permanent teeth.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• 제45권5호
• /
• pp.1-8
• /
• 2008

The belief propagation method that has been studied recently yields good performance in disparity extraction. The method in which a target function is modeled as an energy function based on Markov random field(MRF), solves the stereo matching problem by finding the disparity to minimize the energy function. MRF models provide robust and unified framework for vision problem such as stereo and image restoration. the belief propagation method produces quite correct results, but it has difficulty in real time implementation because of higher computational complexity than other stereo methods. To relieve this problem, in this paper, we propose a fast algorithm of the belief propagation method. Energy function consists of a data term and a smoothness tern. The data term usually corresponds to the difference in brightness between correspondences, and smoothness term indicates the continuity of adjacent pixels. Smoothness information is created from messages, which are assigned using four different message arrays for the pixel positions adjacent in four directions. The processing time for four message arrays dominates 80 percent of the whole program execution time. In the proposed method, we propose an algorithm that dramatically reduces the processing time require in message calculation, since the message.; are not produced in four arrays but in a single array. Tn the last step of disparity extraction process, the messages are called in the single integrated array and this algorithm requires 1/4 computational complexity of the conventional method. Our method is evaluated by comparing the disparity error rates of our method and the conventional method. Experimental results show that the proposed method remarkably reduces the execution time while it rarely increases disparity error.

• The Journal of Advanced Prosthodontics
• /
• 제2권2호
• /
• pp.33-38
• /
• 2010

PURPOSE. Marginal fit is a very important factor considering the restoration's long-term success. However, adding porcelain to copings can cause distortion and lead to an inadequate fit which exposes more luting material to the oral environment and causes secondary caries. The purpose of this study was to compare the marginal fit of 2 different all-ceramic crown systems before and after porcelain veneering. This study was also intended to verify the marginal fit of crowns originated from green machining of partially sintered blocks of zirconia (Lava CAD/CAM system) and that of crowns obtained through machining of fully sintered blocks of zirconia (Digident CAD/CAM system). MATERIALS AND METHODS. 20 crowns were made per each system and the marginal fit was evaluated through a light microscope with image processing (Accura 2000) at 50 points that were randomly selected. Each crown was measured twice: the first measurement was done after obtaining a 0.5 mm coping and the second measurement was done after porcelain veneering. The means and standard deviations were calculated and statistical inferences among the 2 groups were made using independent t-test and within the same group through paired t-test. RESULTS. The means and standard deviations of the marginal fit were $61.52{\pm}2.88{\mu}m$ for the Digident CAD/CAM zirconia ceramic crowns before porcelain veneering and $83.15{\pm}3.51{\mu}m$ after porcelain veneering. Lava CAD/CAM zirconia ceramic crowns showed means and standard deviations of $62.22{\pm}1.78{\mu}m$ before porcelain veneering and $82.03{\pm}1.85{\mu}m$ after porcelain veneering. Both groups showed significant differences when analyzing the marginal gaps before and after porcelain veneering within each group. However, no significant differences were found when comparing the marginal gaps of each group before porcelain veneering and after porcelain veneering as well. CONCLUSION. The 2 all-ceramic crown systems showed marginal gaps that were within a reported clinically acceptable range of marginal discrepancy.

• Polymer(Korea)
• /
• 제38권6호
• /
• pp.694-701
• /
• 2014

In this study, Polygomun aviculare L. (P. aviculare L.) extract loaded elastic liposomes (ELPs) were investigated to enhance the transdermal delivery of P. aviculare L. extract composed of various flavonoids. ELPs were composed of egg phospholipids (PC) and edge activator ($Tego^{(R)}$ care 450) and the physical properties and in vitro permeation studies of ELPs were performed. Particle size ranged from 148.1 to 262.2 nm and deformability index was recorded as 11.5~25.4. Loading efficiency was from 53.1 to 66.3%. In vitro skin permeation studies using Franz diffusion cell demonstrated that ELP-4 having ratio of 85:15 for PC to $Tego^{(R)}$ care 450 exhibited the higher skin permeability than ELP-1, the general liposome without $Tego^{(R)}$ care 450. It was visually seen by fluorescence image restoration microscopy. The findings suggest that ELP-4 selected as the optimal formulation could be used as useful formulation for transdermal delivery of the extract.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제12권4호
• /
• pp.724-729
• /
• 2008

In the case of 'MAEMI', the Typhoon which formed in September, 2003, the largest-scale damage of tidal wave was caused by the co-occurrence of Typhoon surge and full tide. Until now Korea has been focusing on the calculating the amount of damage and its restoration to cope with these sea and harbor disasters. It is essential to establish some systematic counterplans to diminish such damages of large-scale tidal invasion on coastal lowlands considering the recent weather conditions of growing scale of typhoons. Therefore, the purpose of this research is to make the counterplans for prevention against disasters fulfilled effectively based on the data conducted by comparing and analyzing the accuracy between observation values and the results of estimating the greatest overflow area according to abnormal tidal levels centered on Masan area where there was the severest damage from tidal wave at that time. It's necessary utilize data like high-resolution satellite image and LiDAR(etc.) for correct analysis data considering geographical characteristics of dangerous area from the storm surge. And we must make a solution to minimize the damage by making data of dangerous section of flood into GIS Database using those data (as stated above) and drawing correcter damage function.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• 제39권4호
• /
• pp.211-221
• /
• 2021

The Rabbit grass(Trifolium Repens, call it 'Clover') is a representative harmful plant of lawn, and it starts growing earlier than lawn, forming a water pipe on top of the lawn and hindering the photosynthesis and growth of the lawn. As a result, in competition between lawn and clover, clover territory spreads, but lawn is damaged and dried up. Damage to the affected lawn area will accelerate during the rainy season as well as during the plant's rear stage, spreading the area where soil is exposed. Therefore, the restoration of damaged lawn is causing psychological stress and a lot of economic burden. The purpose of this study is to distinguish clover which is a representative harmful plant on lawn, to identify the distribution of damaged areas due to the spread of clover, and to review of changes in vegetation before and after the eradication of clover. For this purpose, a time series analysis of three vegetation indices calculated based on images of convergence Drone with RGB(Red Green Blue) and BG-NIR(Near Infra Red)sensors was reviewed to identify the separation between lawn and clover for selective eradication, and the distribution of damaged lawn for recovery plan. In particular, examined timeseries changes in the ecology of clover before and after the weed-whacking by manual and brush cutter. And also, the method of distinguishing lawn from clover was explored during the mid-year period of growth of the two plants. This study shows that the time series analysis of the MGRVI(Modified Green-Red Vegetation Index), NDVI(Normalized Difference Vegetation Index), and MSAVI(Modified Soil Adjusted Vegetation Index) indices of drone-based RGB and BG-NIR images according to the growth characteristics between lawn and clover can confirm the availability of change trends after lawn damage and clover eradication.

• The Journal of Korean Academy of Prosthodontics
• /
• 제57권2호
• /
• pp.160-170
• /
• 2019

The anterior guidance is one of the important factors in prosthodontic treatment of anterior teeth. The lingual surface shape of anterior restorations is so critical that small errors of treatment procedure can cause discomfort of the patient and disharmony of the dentition. If the anterior restorations are achieved harmonious anterior guidance through the fabrication and adjustment of provisional restorations, it is important to accurately reproduce the lingual surface shape of provisional restorations as the final prosthesis. In this case report, it was used the modified Dahl principle and copy-milled technique of computer-aided design/computer-aided manufacturing (CAD/CAM) system for systematic diagnosis and treatment. Therefore, we tried to reconstruct the restoration shape more precisely by setting the appropriate anterior guidance and superimposing the digital image of the abutment teeth and the provisional restorations. Thus, by promoting functional and esthetic recovery, this case report demonstrates satisfying results to both the patients and dentist.

• The Journal of Korean Academy of Prosthodontics
• /
• 제60권2호
• /
• pp.222-230
• /
• 2022

Digital technology is gradually expanding its field and has a great influence on various fields of dentistry. Recently in digital dentistry, the importance of superimposing various 3-dimensional (3D) image data is emerging, in order to utilize gathered data effectively for diagnosis and prosthesis fabrication. Integrating data from facial scans, intraoral scans, and mandibular movement recordings can create a virtual patient. A virtual patient is formed by integrating digital 3D diagnostic data such as intraoral and extraoral soft tissues, residual dentition, and dynamic occlusion, and the results of prosthetic treatment can be evaluated virtually. The patients in this case report were a 37-year-old female whose chief complaint is that the appearance of the existing prosthesis was distorted and a 55-year-old female patient whose anterior prosthesis needed to be refabricated after the endodontic treatment. 3D facial scans were obtained from each patient, and the patient's mandibular movements were recorded using ARCUS Digma 2 (KaVo Dental GmbH, Biberach an der Riss, Germany). The collected data were integrated on computer-aided design (CAD) software (Exocad dental CAD; exocad GmbH, Darmstadt, Germany) and transferred to a virtual articulator to create a digital virtual patient. The temporary fixed prostheses were designed, restored, and evaluated, and it was reflected into the final restorations. With the aid of the virtual dental patient, accuracy and predictability could be increased throughout treatment, simplifying the occlusal adjustment and clinical evaluation with improved esthetic outcomes.

• Land and Housing Review
• /
• 제14권1호
• /
• pp.83-97
• /
• 2023

The study aims to provide an academic basis for the preservation and restoration of abandoned paddy wetland and the enhancement of its carbon accumulation function. First, the temporal change of the wetlands was analysed, and a typological classification system for wetlands was attempted with the goal of carbon reduction. The types of wetland were classified based on three variables: hydrological environment, vegetation, and carbon accumulation, with a special attention on the function of carbon accumulation. The types of abandoned paddy wetlands were classified into 12 categories based on hydrologic variables- either high or low levels of water inflow potential-, vegetation variables with either dominance of aquatic plants or terrestrial plants, and three carbon accumulation variables including organic matter production, soil organic carbon accumulation, and decomposition. It was found that the development period of abandoned paddy analyzed with aerial photographs provided by the National Geographic Information Institute happened between 2010 and 2015. In the case of the wetland in Daejeon 1 (DJMN01) farming stopped by 1990 and it appeared to be a similar structure to natural wetlands after 2010 . Over the past 40 years the abandoned paddy wetland changed to a high proportion of forests and agricultural lands. As time went by, such forests and agricultural lands tended to decrease rapidly and the lands were covered by artificial grass and other types of forests.

• Journal of Venture Innovation
• /
• 제6권3호
• /
• pp.165-184
• /
• 2023

Since municipal welfare institutions operate for different purposes from general companies or public enterprises, ESG practice items and model construction should be conducted through various and comprehensive social welfare studies. Since there are not many studies available in domestic welfare institutions yet and there are no suitable ESG management utilization indicators, the Cheonan Welfare Foundation's strategy and management strategy system were established to spread the model to other welfare institutions and become a leading foundation through education and training. The foundation and front-line welfare institutions selected issues identification and key issues through the foundation's empirical analysis and criticality analysis, focusing on understanding ESG management and ways to establish a practice model that positively affects institutional image and business performance. Based on this, the promotion system was examined by establishing a performance management plan after deriving appropriate strategies and establishing a strategic system for social welfare institutions. Environmental and social responsibility, transparent management, safety management system establishment, emergency and prevention, user (customer) satisfaction system establishment, anti-corruption prevention and integrity ethics monitoring and evaluation, responsible supply chains, and community contribution programs. This study attempted to specifically present efforts to settle ESG management through the consideration of the Cheonan Welfare Foundation. Therefore, it is considered to be useful data for developing ESG management by referring to the systematic development process of the Cheonan City Restoration Foundation to develop ESG measurement indicators.