• Physical Therapy Rehabilitation Science
• /
• v.5 no.4
• /
• pp.210-214
• /
• 2016

Objective: The aim of this study was to measure the muscle architectural parameters of abdominal muscles in healthy individuals by rehabilitative ultrasound imaging (RUSI) and to investigate their changes after bridging exercise in various environments. Design: Cross-sectional study. Methods: The study included 40 healthy participants (19 men, 21 women). Subjects were randomly allocated to a stable surface group (SG, n=20) or an unstable surface group (UG, n=20). The participants assumed three positions in rest, bridging exercise with knee flexion $60^{\circ}$, and bridging exercise with knee flexion $90^{\circ}$ for the measurement of abdominal muscle thickness by RUSI. For the resting position, the participants held the head neutral in a hook-lying position and the dominant side was measured. For contraction, the participants performed the bridging exercise with the knee joint in $60^{\circ}$ and $90^{\circ}$ of flexion for 10 seconds each. Results: For transversus abdominis, external oblique muscle thickness, within the stable surface group and the unstable surface group, no significant contraction difference was observed in both the $60^{\circ}$ and $90^{\circ}$ bridge exercise conditions. Contraction difference of internal oblique muscle was significantly larger at $90^{\circ}$ than at $60^{\circ}$ within the SG (p<0.05). But within the UG, no significant contraction difference was shown. There was no significant contraction difference between the surface group and the unstable SG at $60^{\circ}$ condition and at $90^{\circ}$ condition in all measured muscles. Conclusions: The contraction difference is different for each muscle during bridge exercise with knee flexion $60^{\circ}$ and bridging exercise with knee flexion $90^{\circ}$. Muscle contraction difference is generally large when exercised on an unstable surface than a stable surface, but these are not statistically significant when bridging exercise is performed using dynamic air cushion for unstable surface.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4C
• /
• pp.127-136
• /
• 2011

The settlement of a compaction plate resting on the surface of rubble-mound and subjected to a vibrating vertical load can be characterized by a transient amplitude and a plastic settlement. As long as the maximum imposed load does not exceed the bearing capacity of the rubble-mound, plastic settlement will approach an ultimate value and essentially steady-state vibration will ensue. For the settlement behavior by vibro-compaction, most laboratory experiments were conducted on laterally confined samples with loads over the full surface area or on samples placed on a vibrating table. In the field, the loads cover only a small fraction of the surface area. In this study, crushed stones are loaded with the same as field condition. According to the vibro-compaction experiments on crushed stone, it was found that approximately 90% of total settlement occur within 2 minutes and plastic settlement increases with increasing cyclic stress levels including static and dynamic stress. A compaction equation on which the number of load cycles, amplitude of plate, settlement, width of plate, and cyclic stress are related each other is proposed.

• Ocean and Polar Research
• /
• v.38 no.1
• /
• pp.21-33
• /
• 2016

Gametogenesis of the comb pen shell, Atrina pectinata (Linnaeus, 1767) (Bivalvia: Pinnidae) on the southern coast of Ulleungdo Island, Korea was assessed monthly (November 2013 to October 2014) using histology. Gametogenesis commenced in January when the surface water temperature was $12.6^{\circ}C$ and pen shells evidenced an early development phase with small oogonia from January to April, although few females exhibited ripe eggs in their follicular epithelium. In April, the oocyte diameter increased rapidly, and fully mature eggs appeared in May. First spawning males and females were observed in June as the surface water temperature reached $19.3^{\circ}C$ and July ($23.2^{\circ}C$) respectively. The spawning activity continued until the end of September. Histology indicated that the spawning peak of the females in Ulleungdo Island was July to August. During October to January, most of the pen shells were in spent and resting stages. Our data suggested that A. pectinata is a summer spawner, and their annual gametogenesis is closely associated with the seasonal variation in the surface water temperature. The present study is the first provided fundamental information on the life history of A. pectinata in Ulleungdo Island, and this can be put to good use in the management of this pen shell in the study area.

• Journal of the Korean Chemical Society
• /
• v.57 no.4
• /
• pp.432-438
• /
• 2013

We report a contact angle goniometer that can be easily assembled and used in high school and general chemistry experiments. It consists of an LED flash, a sample stand, and a camera fixed on an optical bread board, and the sample area is covered to block light from outside with a box with holes on both sides. ImageJ, free image analyzing software and a JAVA plugin (Drop_analysis) were used to determine the contact angle of liquid drop resting on solid surface. The contact angles of various liquids were successfully measured on various surfaces. The solid surface energies have also been determined using the Owen-Wendt method from the contact angles of $H_2O$ and $CH_2I_2$. The results reasonably agree with the previously reported values, showing the surface characteristics and modification as well as the dispersive and polar contributions. These contact angle goniometer and method for determination of the contact angle and surface energy can be applied to observation of various surface properties including wettability, hydrophilicity, and water repelling. Students can learn how the surface properties are related to the intermolecular interactions and gain experience about the equilibrium between the related forces, optics, and mathematical derivations.

• Earthquakes and Structures
• /
• v.14 no.1
• /
• pp.85-94
• /
• 2018

The paper focuses on the seismic responses of a hyperbolic cooling tower resting on soil foundation represented by the three-parameter Vlasov elastic soil model. The three-parameter soil model eliminates the necessity of field testing to determine soil parameters such as reaction modulus and shear parameter. These parameters are calculated using an iterative procedure depending on the soil surface vertical deformation profile in the model. The soil and tower system are modeled in SAP2000 structural analysis program using a computing tool coded in MATLAB. The tool provides a two-way data transfer between SAP2000 and MATLAB with the help of Open Application Programming Interface (OAPI) feature of SAP2000. The response spectrum analyses of the tower system with circular V-shaped supporting columns and annular raft foundation on elastic soil are conducted thanks to the coded tool. The shell and column forces and displacements are presented for different soil conditions and fixed raft base condition to investigate the effects of soil-structure interaction. Numerical results indicate that the flexibility of soil foundation leads to an increase in displacements but a decrease in shell membrane and column forces. Therefore, it can be stated that the consideration of soil-structure interaction in the seismic response analysis of the cooling tower system provides an economical design process.

• Physical Therapy Korea
• /
• v.13 no.2
• /
• pp.61-69
• /
• 2006

The purpose of this study was to compare the electromyography (EMG) activities of the lumbar extensor muscles during motion of trunk flexion-extension and compare range of motion (ROM) with a 3-dimensional motion analysis system of the lumbar region between subjects with chronic low back pain (CLBP) and healthy subjects during the trunk flexion-extension, trunk rotation and trunk lateral flexion cycle. Thirty CLBP subjects and thirty healthy subjects were included. We measured the root mean square (RMS) value of the lumbar extensor muscles from resting, standing, lumbar flexion and return position. The RMS ratio was normalized from maximal EMG activity of the lumbar extensor muscles during trunk motion. The results of this study showed that the RMS ratio of the lumbar extensor was significantly higher in CLBP subjects than healthy subjects during all of trunk motion (p<.05). The ratio of the highest RMS value during flexion and extension was higher in CLBP subjects than in healthy subjects (p<.05). The ROM of the lumbar region was significantly lower in CLBP subjects than healthy subjects during trunk flexion-extension, trunk rotation and lateral flexion cycle. The relationship between the RMS ratio for full lumbar flexion and the ROM of lumbar flexion was not correlated significantly. CLBP subjects have both decreased ROM of the lumbar region and higher muscle activities of the lumbar extensor muscle than healthy subjects.

• Structural Engineering and Mechanics
• /
• v.54 no.1
• /
• pp.69-85
• /
• 2015

In this paper, a receding contact problem for an elastic layer resting on two quarter planes is considered. The layer is pressed by a stamp and distributed loads. It is assumed that the contact surfaces are frictionless and only compressive traction can be transmitted through the contact surfaces. In addition the effect of body forces are neglected. Firstly, the problem is solved analytically based on theory of elasticity. In this solution, the problem is reduced into a system of singular integral equations in which contact areas and contact stresses are unknowns using boundary conditions and integral transform techniques. This system is solved numerically using Gauss-Jacobi integral formulation. Secondly, two dimensional finite element analysis of the problem is carried out using ANSYS. The dimensionless quantities for the contact areas and the contact pressures are calculated under various distributed load conditions using both solutions. It is concluded that the position and the magnitude of the distributed load have an important role on the contact area and contact pressure distribution between layer and quarter plane contact surface. The analytic results are verified by comparison with finite element results.

• Journal of Aquaculture
• /
• v.17 no.2
• /
• pp.128-132
• /
• 2004

Reproductive cycle of the brown sole, Limanda herzensteini was investigated by means of histological methods. The testis showed the presence of seminiferous tubule. The tubule consisted of many testicular cysts, each of which contained numerous germ cells - all at the same developmental stage. The ovary consisted of several ovarian lamellae and the oogonia originated from the inner surface of the ovarian lamella. Oocyte development was group-synchronous. Gonadosomatic index (GSI) of the male and female was the highest in January and March, respectively. Reproductive cycle could be classified into the growing (June-September), maturation (October-December), ripe and spent (January-March), and recovery and resting (April-May).

• Wind and Structures
• /
• v.22 no.3
• /
• pp.329-348
• /
• 2016

This work presents a simple hyperbolic shear deformation theory for analysis of functionally graded plates resting on elastic foundation. The proposed model contains fewer number of unknowns and equations of motion than the first-order shear deformation model, but the transverse shear stresses account for a hyperbolic variation and respect the tangential stress-free boundary conditions on the plate boundary surface without introducing shear correction factors. Equations of motion are obtained from Hamilton's principle. The Navier-type analytical solutions for simply-supported plates are compared with the existing solutions to demonstrate the accuracy of the proposed theory.

• International Journal of Contents
• /
• v.6 no.1
• /
• pp.41-46
• /
• 2010

The aim of this study was to investigate the effect of different shoe-heel heights on the surface electromyographic (EMG) activity of vastus medialis (VM) and vastus lateralis (VL) during treadmill walking in female patients with patellofemoral pain (PFP). Nineteen women with PFP participated in this research. EMG signals were recorded from the VM and VL of both sides and were compared during the treadmill walking. The subjects walked on a treadmill wearing shoes of three different heel heights: 1 cm, 3 cm and 7 cm. Each subject walked on a treadmill for five minutes at a speed of 2 km/hour with three minutes resting intervals between consecutive trials. The data were analyzed by one-way repeated-measures analysis of variance. The results of the present study indicate that EMG data of the VM and VL of female patients with PFP did improve with an increase in the height of the shoe heel, which were statistically significant. Additionally, the EMG activity of VM increased more dramatically than that of VL associated with the task of walking with high-heeled shoes on the treadmill. This study suggests that the type of high-heeled shoes is related to the VM and VL muscle activation patterns contributing to knee joint pathologies in female patients with PFP.