• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.9 no.2
• /
• pp.72-80
• /
• 2006

This study was conducted to evaluate the influence of dried swine excrement on the germination of Pinus thunbergii seeds, the growth response of seedlings of Pinus thunbergii and the uptaken of nitrogen and phosphorous by seedlings of Pinus thunbergii. The germination rate of seeds of Pinus thunbergii tends to decrease according to the increasing of application amount of dried swine excrement and the application amounts of dried swine excrement which is more than 3%(w/w %) makes the rate of germination to much more decreased. Contents of nitrogen and phosphorus are much higher in a way that the dried swine excrement was treated in nursery soil. 179 days after seeds of Pinus thunbergii were sowed, nitrogen contents in soil was decreased more than 70% and phosphorus was decreased 20 to 45%. Growth response of Pinus thunbergii was much higher in treatment of dried swine excrement than in control. But growth response was not affected by increasing of application amounts of dried swine excrement. Growth response of Pinus thunbergii was the highest in 2%(w/w %) application but its growth response was decreased in treatment more than 3% (w/w %) of dried swine excrement.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.6
• /
• pp.110-119
• /
• 2000

In this paper, an experimental study is carried out under the operating conditions of low speed and rapid acceleration in order to investigate and improve the response characteristics of a turbocharged diesel engine with radial turbine driven by exhaust gas. A rapid acceleration for investigating the response performance is applied to the fuel-pump rack of the engine from 0-10% to 0-40% in steps of 10%, and accelerating time of 1, 2 and 3 seconds is applied to the engine. Further experiment for improving the low speed torque and acceleration performance is also performed by means of injecting air into the inlet manifold at compressor exit during the period of low speed and application of a rapid acceleration. The effects of air injection on the response performance are represented at subjected engine speed with the changes of response performance factors such as air injection pressure, air injection period, accelerating rate, accelerating time and load. From the experimental results obtained throughout this study, it is shown that air injection into the inlet manifold at compressor exit is closely related to the improvement of low speed and acceleration performance of a turbocharged diesel engine.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.2
• /
• pp.569-573
• /
• 2016

Background: A colorectal cancer screening program was piloted in two districts of Kedah in 2013. There is scarcity of information on colorectal cancer screening in Malaysia. Objective: Thus, this research was conducted to evaluate the colorectal cancer screening program in the districts to provide insights intop its efficacy. Materials and Methods: A cross sectional study was conducted using data on the colorectal cancer screening program in 2013 involving Kota Setar and Kuala Muda districts in Malaysia. We determined the response rate of immunochemical fecal occult blood test (iFOBT), colonoscopy compliance, and detection rates of neoplasia and carcinoma. We also compared the response of FOBT by demographic background. Results: The response rate of FOBT for first iFOBT screening was 94.7% while the second iFOBT screening was 90.7%. Participants from Kuala Muda district were 27 times more likely to default while Indians had a 3 times higher risk of default compared to Malays. The colonoscopy compliance was suboptimal among those with positive iFOBT. The most common finding from colonoscopy was hemorrhoids, followed by tubular adenoma. Detection rate of carcinoma and neoplasia for our program was 1.2%. Conclusions: In summary, the response rate of iFOBT was encouraging but the colonoscopy compliance was suboptimal which led to a considerably low detection rate.

• Nuclear Engineering and Technology
• /
• v.48 no.6
• /
• pp.1349-1359
• /
• 2016

Alternative control schemes for an Advanced High Temperature Reactor system consisting of a reactor, an intermediate heat exchanger, and a secondary heat exchanger (SHX) are presented in this paper. One scheme is designed to control the cold outlet temperature of the SHX ($T_{co}$) and the hot outlet temperature of the intermediate heat exchanger ($T_{ho2}$) by manipulating the hot-side flow rates of the heat exchangers ($F_h/F_{h2}$) responding to the flow rate and temperature disturbances. The flow rate disturbances typically require a larger manipulation of the flow rates than temperature disturbances. An alternate strategy examines the control of the cold outlet temperature of the SHX ($T_{co}$) only, since this temperature provides the driving force for energy production in the power conversion unit or the process application. The control can be achieved by three options: (1) flow rate manipulation; (2) reactor power manipulation; or (3) a combination of the two. The first option has a quicker response but requires a large flow rate change. The second option is the slowest but does not involve any change in the flow rates of streams. The third option appears preferable as it has an intermediate response time and requires only a minimal flow rate change.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.6
• /
• pp.637-644
• /
• 2021

Dynamic response of structures can be evaluated experimentally by conducting cyclic loading tests. It has been known that steel materials are rate-dependent and the lateral response of a structure is significantly affected by the presence of axial force. However, the rate-dependency of steel column structures subjected to both axial and lateral loads has not been sufficiently studied yet due to the difficulty of controlling the axial force in a real-time manner during test. This study introduces an advanced way to apply the axial load in real-time to a column specimen using the adaptive time series (ATS) compensator and the flexible loading beam (FLB), where the H-shape steel columns made of SS275 are used for monotonic and cyclic loading tests with various loading rates with axial loads. The lateral strength and post-yield response of the steel columns are compared for each of monotonic and cyclic loading tests. The estimating equation of yield stress of various strain rate has proposed and finite element analysis were performed for comparison.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.6
• /
• pp.894-902
• /
• 2003

Prebiotics (peptides, N-acetyglucoamine, fructo-oligosaccharides, isomalto-oligosaccharides and galactooligosaccharides) were added to skim milk in order to improve the growth rate of contained Lactobacillus acidophilus, Lactobacillus casei, Bifidobacterium longum and Bifidobacterium bifidum. The purpose of this research was to study the potential synergy between probiotics and prebiotics when present in milk, and to apply modern optimization techniques to obtain optimal design and performance for the growth rate of the probiotics using a response surface-modeling technique. To carry out response surface modeling, the regression method was performed on experimental results to build mathematical models. The models were then formulated as an objective function in an optimization problem that was consequently optimized using a genetic algorithm and sequential quadratic programming approach to obtain the maximum growth rate of the probiotics. The results showed that the quadratic models appeared to have the most accurate response surface fit. Both SQP and GA were able to identify the optimal combination of prebiotics to stimulate the growth of probiotics in milk. Comparing both methods, SQP appeared to be more efficient than GA at such a task.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.5
• /
• pp.742-747
• /
• 2007

In order to investigate the mechanism of adaptation to long-term heat stress, six female buffalo calves of about 7 to 8 months age, were exposed to the cool-comfort environment (THI 65) for 21 days to obtain normal values of blood acid-base. An adaptive response of acid-base regulation was determined to long term (21 days) exposure of buffalo calves to hot-dry (THI 80) and hot-humid (THI 84) conditions. Higher rectal temperature and respiratory rate was recorded under hot-humid exposure compared to hot-dry. Significant reduction in the rectal temperature and respiratory rate on day 21 of hot-dry exposure indicated early thermal adaptation compared to hot-humid. Decreasing rectal temperature and respiratory rate from day 1 to 21 was associated with concurrent decrease in blood pH and pCO2. Increased plasma chloride concentration with low base excess in blood and in extracellular fluid suggested compensatory response to respiratory alkalosis. Reduced fractional excretion of sodium with increased fractional excretion of potassium and urine flow rate indicated renal adaptive response to heat stress.

• Advances in materials Research
• /
• v.5 no.2
• /
• pp.67-80
• /
• 2016

The objective of the present work is to optimize process parameters namely, cutting speed, feed rate, and depth of cut in milling of AISI 304 stainless steel. In this work, experiments were carried out as per the Taguchi experimental design and an $L_{27}$ orthogonal array was used to study the influence of various combinations of process parameters on surface roughness (Ra) and material removal rate (MRR). As a dynamic approach, the multiple response optimization was carried out using grey relational analysis (GRA) and desirability function analysis (DFA) for simultaneous evaluation. These two methods are considered in optimization, as both are multiple criteria evaluation and not much complicated. The optimum process parameters found to be cutting speed at 63 m/min, feed rate at 600 mm/min, and depth of cut at 0.8 mm. Analysis of variance (ANOVA) was employed to classify the significant parameters affecting the responses. The results indicate that depth of cut is the most significant parameter affecting multiple response characteristics of GFRP composites followed by feed rate and cutting speed. The experimental results for the optimal setting show that there is considerable improvement in the process.

• Journal of Korean Association for Spatial Structures
• /
• v.24 no.2
• /
• pp.65-73
• /
• 2024

In this study, we propose an optimal design method by applying the Prefabricated Buckling Restrained Brace (PF-BRB) to structures with asymmetrically rigidity plan. As a result of the PF-BRB optimal design of a structure with an asymmetrically rigidity plan, it can be seen that the reduction effect of dynamic response is greater in the case of arrangement considering the asymmetric distribution of stiffness (Asym) than in the case of arrangement in the form of a symmetric distribution (Sym), especially It was confirmed that at an eccentricity rate of 20%, the total amount of reinforced PF-BRBs was also small. As a result of analyzing the dynamic response characteristics according to the change in eccentricity of the asymmetrically rigidity plan, the distribution of the reinforced PF-BRB showed that the larger the eccentricity, the greater the amount of damper distribution around the eccentric position. Additionally, when comparing the analysis models with an eccentricity rate of 20% and an eccentricity rate of 12%, the response reduction ratio of the 20% eccentricity rate was found to be large.

• The Korean Journal of Applied Statistics
• /
• v.33 no.1
• /
• pp.11-23
• /
• 2020

Sampling design should provide statistics to meet a given accuracy while saving cost and time. However, a large number of non-responses are occurring due to the deterioration of survey circumstances, which significantly reduces the accuracy of the survey results. Non-responses occur for a variety of reasons. Chung and Shin (2017, 2019) and Min and Shin (2018) found that the accuracy of estimation is improved by removing the bias caused by non-response when the response rate is an exponential or linear function of variable of interests. For that case they assumed that the error of the super population model follows normal distribution. In this study, we proposed a non-response bias adjusted estimator in the case where the error of a super population model follows the gamma distribution or the log-normal distribution in a business survey. We confirmed the superiority of the proposed estimator through simulation studies.