• Proceedings of the ESK Conference
• /
• 1993.10a
• /
• pp.15-19
• /
• 1993

Numerous motivational methodologies were analyzed with respect to improvement of the use of personal protective equipment (PPE) in the industrial field. Common industrial protective devices under consideration included hearing protection devices, respiratory protection devices, eye and face protection devices, etc. It was found that several of such methods could readily be implemented in the real world to protect workers from hazardous industrial sterssors, such as intense noises, toxic air contaminants, and other dangerous industrial objects (e,g., chemicals). Current research issues and recommendations for future research are addressed.

• Fashion & Textile Research Journal
• /
• v.25 no.2
• /
• pp.248-254
• /
• 2023

This study aims to measure the skin rigidity of different facial areas among Koreans and propose guidelines for each area's skin rigidity that can be applied with a facial robot for testing respiratory protective devices. The facial skin rigidity of 40 participants, which included 20 men and 20 women, aged 20 to 50, was analyzed. The rigidity measurement was conducted in 13 facial areas, including six areas in contact with the mask and seven non-contact areas, by referring to the facial measurement guidelines of Size Korea. The facial rigidity was measured using the Durometer RX-1600-OO while in a supine position. The measurement procedure involved contacting the durometer vertically with the reference point, repeating the measurement of the same area five times, and using the average of three values whose variability was between 0.4 and 4.2 Shore OO. The rigidity data analysis used precision analysis, descriptive statistics analysis, and mixed-effect ANOVA. The analysis confirmed the rigidity of the 13 measurement areas, with the highest rigidity of the face being at the nose and forehead points, with values of 51.2 and 50.8, respectively, and the lowest rigidity being at the chin and center of the cheek points, with values of 19.2 and 20.7, respectively. Significant differences between gender groups were observed in four areas: the tip of the nose, the point below the chin, the area below the lower jaw, and the inner concha.

• Safety and Health at Work
• /
• v.14 no.3
• /
• pp.287-294
• /
• 2023

Background: Fruit and vegetable market is an abundant source of bioaerosols. Exposure to organic and inorganic waste and long-term inhalation of bioaerosols during working hours leads to chronic respiratory symptoms. Hence, this study aimed to determine the prevalence of chronic respiratory symptoms and related factors among fruit and vegetable workers compared with the control group in Addis Ababa, Ethiopia. Methods and materials: A comparative cross-sectional study was conducted from 2020 to 2021. Data were entered in EpiData 3.1 and exported to Statistical Package for the Social Sciences (SPSS) version 25. Logistic regressions were computed to depict the data and related factors. The culture method was done to count and compare bacterial and fungal concentrations between fruit and vegetable workers and office workers. Results: In this study, the prevalence of chronic respiratory symptoms (PR = 2.87, 95% confidence interval [CI]: 1.772-4.66) was significantly higher among fruit and vegetable workers (46.7%) than controls (23.4%). Sex (adjusted odds ratio [AOR] = 2.11, 95% CI = 1.12-3.98), educational status (AOR = 1.34, 95% CI = 0.78-2.32), working hours per day (AOR = 3.91, 95% CI = 1.586-9.65), and working department (AOR = 3.20, 95% CI = 0.90-11.40) were associated with chronic respiratory symptoms. Bacterial and fungal concentrations were significantly higher in the air of the vegetable market (276 colony-forming unit) than the air in the workplace of controls (7 colony-forming unit). Conclusion: The fruit and vegetable market workers (greengrocers) had a higher prevalence of chronic respiratory symptoms relative to office workers. Respiratory protective devices should be given to deliver preventive measures.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.3
• /
• pp.350-366
• /
• 2016

Objectives: No 3D anthropometric analyses have been conducted for Korean children's faces for the purpose of designing respiratory protective devices. The aim of this study was to develop masks against yellow dust and fine particulates, particularly for children in Korea. Methods: This study utilized a 3D scanning method to obtain 16 facial anthropometric data from children, ages of 5 to 13 years old. A total of 144 boys and girls were recruited from the kindergarten, elementary schools and middle schools in Seoul. With facial dimensions obtained, cluster analysis was performed to categorize them into similar facial groups. For each cluster, an optimal mask was designed and manufactured using a 3D printer. In addition, lung function data were obtained from 62 subjects and compared with those of normal adults. The pulmonary physiological results were subsequently used to suggest a test method for mask certification. Results: Facial shapes were classified into tree clusters: small, medium, and large. The face width and length for the first group were small with high nosal protrusion. The face width and length for the second group were the largest among the three clusters. The third group had the largest angle of nose root - gnathion(n-prn-gn). Age was the most significant variable in the facial dimensions. Children's pulmonary physiological capacity was about 60% of adults' capacity. The results of fit test using the prototype masks developed showed very good fits for children. Conclusions: For Korean children, three mask sizes will be sufficient and practical for providing protection against yellow dust and fine particulates. Anthropometric data obtained using digitalized 3D face analysis can be very effective for designing respiratory devices. 3D images can be accurate and easily measured for multiple dimensions, particularly for curved areas of the face. It is imperative to adopt different test methods for certifying respiratory protective devices for children, since their pulmonary physiological capacity is inferior compared with that of adults.

• Particle and aerosol research
• /
• v.19 no.1
• /
• pp.1-11
• /
• 2023

Respiratory face masks are protective facepieces that are designed to filter inhaled air. They are easy-to-use devices that can protect the wearer against various hazardous particles in the air. Respiratory face masks also prevent the spread of viruses and bacteria-containing droplets that are released from the coughing or sneezing of the infected people. During the COVID-19 pandemic, various types of face masks have circulated on the market. Their ability to filter sub-micron particles, which are the sizes of harmful particulate matter and airborne viruses, needs to be investigated. Their breathability, the easiness of breath through the mask, also needs to be considered. In this study, wwe evaluated the performance of filters used for different types of face masks certified by different standards including Korean (KF94, KF80, KF-AD), USA (N95), and Chinese (KN95) standards. We also tested the filters of nanofiber masks and surgical masks for which there are no standards for filtration test. The N95 mask filters showed the highest quality factor for capturing virus-sized particles. The other types of mask filters have acceptable performance except for nanofiber mask filters whose performance is very low.

• Safety and Health at Work
• /
• v.10 no.3
• /
• pp.275-304
• /
• 2019

Background: Air-purifying, tight-fitting facepieces are examples of respiratory protective equipment and are worn to protect workers from potentially harmful particulate and vapors. Research shows that the presence of facial hair on users' face significantly reduces the efficacy of these devices. This article sets out to establish if an acceptable seal could be achieved between facial hair and the facepiece. The team also created and investigated a low-cost "pressure testing" method for assessing the efficacy of a seal to be used during the early design process for a facepiece designed to overcome the facial hair issue. Methods: Nine new designs for face mask seals were prototyped as flat samples. A researcher developed a test rig, and a test protocol was used to evaluate the efficacy of the new seal designs against facial hair. Six of the seal designs were also tested using a version of the conventional fit test. The results were compared with those of the researcher-developed test to look for a correlation between the two test methods. Results: None of the seals performed any better against facial hair than a typical, commercially available facepiece. The pressure testing method devised by the researchers performed well but was not as robust as the fit factor testing. Conclusion: The results show that sealing against facial hair is extremely problematic unless an excessive force is applied to the facepiece's seal area pushing it against the face. The means of pressure testing devised by the researchers could be seen as a low-cost technique to be used at the early stages of a the design process, before fit testing is viable.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.3
• /
• pp.66-71
• /
• 1998

This study was investigated to evaluate worker exposures to organic solvents by type of print industry. Results were as follows; 1. Workers were exposed to mixture of toluene, isopropyl alcohol(IPA), methyl ethyl ketone(MEK), n-hexane, ethylacetate(EA), acetone. The components of high exposure solvents were toluene, IPA and MEK. 2. Considering additive effects of the compounds, exposure indices(Em) were calculated. The Mean of exposure indices were 1.79 for Gravere, 0.41 for Screen and 0.14 for Opset workplace. The workers of Gravere workplace were estimated to overexpose for solvents. 3. The highest overexposed solvent was toluene for a single component. The rate of overexposed level for toluene was 7.41% for some print workplace and for mixed solvent was 1.85％. 4. Local exhaust systems were inappropriate and respiratory protective devices were not supplied to the workers. 5. Sound level was over 90dB(A) in Opset print workplace and some measures should be performed to get down the sound level.

• Clinical Endoscopy
• /
• v.55 no.5
• /
• pp.588-593
• /
• 2022

In the highly contagious coronavirus disease 2019 pandemic, aerosol-generating procedures (AGPs) are associated with high-risk of transmission. Upper gastrointestinal endoscopy is a procedure with the potential to cause dissemination of bodily fluids. At present, there is no consensus that endoscopy is defined as an AGP. This review discusses the current evidence on this topic with additional management. Prevailing publications on coronavirus related to upper gastrointestinal endoscopy and aerosolization from the PubMed and Scopus databases were searched and reviewed. Comparative quantitative analyses showed a significant elevation of particle numbers, implying that aerosols were generated by upper gastrointestinal endoscopy. The associated source events have also been reported. To reduce the dispersion, certain protective measures have been developed. Endoscopic unit protocols are recommended for the concerned personnel. Therefore, upper gastrointestinal endoscopy should be classified as an AGP. Proper practices should be adopted by healthcare workers and patients.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.8 no.1
• /
• pp.88-94
• /
• 1998

Korea has been rapidly industrialized during the past 35 years. During this period, Korea has emphasized only production and workers health has been ignored. Workers are most frequently exposed to organic vapors, such as thinners. This study was performed to evaluate worker exposures to organic solvents by size and type of industry. Results are summarized below. Workers were exposed to mixtures of toluene, xylenes, trichloroethylene, n-hexane, acetone, methanol, n-butanol, n-butyl acetate, and MIBK. Considering additive effects of the compounds, exposure indices (EIs) were calculated. It was found that worker exposures to organic solvents were highest in small industries and lowest in large industries. During a day shift, the highest exposure was indicated 3 - 5 p.m. in the afternoon. Workers in small industries had potential exposures exceeding permissible exposure limits for organic solvents. Local exhuast systems were inappropriate and respiratory protective devices were not supplied to the workers in small industries. Neither program for safe use and storage of toxic materials nor program for respirators was found in any of the plants investigated. Based on the results of the study, workers of small scale industries should be considered first in industrial health.

• Medical Lasers
• /
• v.8 no.2
• /
• pp.43-49
• /
• 2019

The plume produced by vaporizing tissue with a laser contains a variety of contaminants called laser-generated air pollutants (LGACs). LGACs consist of a mixture of toxic gas components, biomicroparticles, dead and living cells, and viruses. Toxic odors and thick smoke from surgical incisions and the coagulation of tissues can irritate eyes and airways, as well as cause bronchial and pulmonary congestion. Because of the potential risk of the smoke, it is advisable to appropriately remove it from the surgical site. We recommend using a smoke evacuator to remove the smoke. Suction nozzles should be placed as close as possible to the surgical site in a range of 2 cm or less. In-line filters should be used between the inlet and outlet of the surgical site. All air filtration devices should be capable of removing particles below 0.1 microns in size. The filter pack should be handled according to infection control procedures in the operating room. The laser mask can be an auxiliary protective device if it is properly worn. Some smoke inhaled under the nose wrap or over the side of the mask will not be filtered. As in electrosurgical operations, a suitable mask should be worn while smoke is present.