• Journal of Korean Academy of Nursing Administration
• /
• v.3 no.2
• /
• pp.151-165
• /
• 1997

A cost analysis for hospitalized patients was performed based on the KDRG classification in order to determine an appropriate nursing fee under the PPS(Prospective Payment System). The data was collected from 20 nursing units of three tertiary hospitals and two secondary hospitals from August 26 to September 15, 1996. The study consisted of 148 inpatients diagnosed for lens procedures(KDRG 03900), tonsillectomy &/or adenoidectomy(KDRG 16100), Cesarean section(KDRG 37000), or vaginal delivery(KDRG 37300) without any complications. The direct or indirect nursing hours of each patients were measured. Then, direct or indirect nursing expenditures of four nursing units, operating room and delivery room were computed. Finally, the resources used including average total nursing hours, average length of stay and average nursing cost of each KDRG were estimated as follows; 1) The average total nursing hours were 640 minutes for lens procedures, 403 minutes for tonsillectomy &/or adenoidectomy, 934 minutes for appendectomy with complicated principal diagnosis, 1,094 minutes for Cesarean section and 631 minutes for vaginal delivery. Significant differences were found in average total nursing hours among hospitals. 2) The average length of stay in lens procedures were 5 days, 4 days for tonsillectomy &/or adenoidectomy, 6 days for appendectomy with complicated principal diagnosis, 8 days for Cesarean section and 3 days for vaginal delivery. All results were within normal determined by the Ministry of Health and Welfare although significant differences existed among hospitals, especially with average length of stay for leng procedures between tertiary hospitals and secondary hospitals which was greater than for those of others. 3) The average nursing cost were 87,146 Won for lens procedures, 69,600 Won for tonsillectomy &/or adenoidectomy, 128,337 Won for appendectomy with complicated principal diagnosis, 151,769 Won for Cesarean section and 85,403 Won for vaginal delivery. These costs were 7.6%, 13.0%, 13.0%, 16.0% and 22.0%, respectively, of the official price fixed by the Ministry of Health and Welfare under the prospective payment system. Research for the analysis of nursing costs according to the severity of illness for those KDRGs shoud be carried out within the period of the PPS pilot project. In addition, a proper nursing fee schedule for a new reimbursement system based upon the result of the above research should be prepared in the near future.

• Journal of Korean Society of Forest Science
• /
• v.89 no.2
• /
• pp.145-160
• /
• 2000

This study is focused to the national park of Korean typical Sea Hally$\check{o}$ Haesang, and its visual resources and practiced inspect course by the way of suppositions and tests, to show the visual resource management objectively, and that of qualitative basic data. Accordingly by measuring the physical amount spatial structure with the visual amount originated from the Mesh Analyzing Method and the Visual Preference from the Scenic Beauty Estimation(S.B.E.) method and analyzed the valuation of the visual resource by Iverson method. Spatial image structure measured by Semantic Differential(S.D.) Scale was shown through the factor analysis algorithm for the analyzing psychological amount and examined the flowing out of decisive factor and the objective importance related to the mutual factors by appling the measurement of the visual quality. As a national Park, the visual factors that have natural landscape harmonized with forest, sky, surface of the water, curious stones and rocks, and temples should be escalated their values affirmatively so as to be the scenery of pointed direction and enjoyable, and it is of more needed for visual resource and its' controlling technique to make artificial structures more intentional planning and systemical setting. When we are viewing the improvement for the national park along with the visual resource management, reasonable level of development is needed, because when men interference surpass plantations and leasts will be damaged and the quality of natural landscape can be lowered, so it is needed to set up a management end, tangibly or clearly; and it is permitted limit coming and going ablably by accounting the suitable number for availing. But the controling end should be set in every level, positive management, very actively within the permissive varcability. It is the main business for the national park to prevent the damage from human for their gay life or to prevent the damage of a land carpet, and to restorate for the visual resource management.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.1
• /
• pp.29-41
• /
• 2017

Design rainfalls are one of the most important hydrologic data for river management, hydraulic structure design and risk analysis. The design rainfalls are first estimated by a point frequency analysis and the IDF (intensity-duration-frequency) curve is then constructed by a nonlinear regression to either interpolate or extrapolate the design rainfalls for other durations which are not used in the frequency analysis. It has been widely recognised that the more reliable approaches are required to better account for uncertainties associated with the model parameters under circumstances where limited hydrologic data are available for the watershed of interest. For these reasons, this study developed a hierarchical Bayesian based GLM (generalized linear model) for a regional frequency analysis in conjunction with a scaling function of the parameters in probability distribution. The proposed model provided a reliable estimation of a set of parameters for each individual station, as well as offered a regional estimate of the parameters, which allow us to have a regional IDF curve. Overall, we expected the proposed model can be used for different aspects of water resources planning at various stages and in addition for the ungaged basin.

• Journal of Life Science
• /
• v.20 no.7
• /
• pp.1086-1092
• /
• 2010

To estimate the genetic characteristics and cumulative power of discrimination (CPD) within Korean native commercial chicken, we used a total of 395 genomic DNAs from six breeds population (Korean Native Red chicken: R, Korean Native Yellow chicken: Y, Korean native Commercial Chicken: C, Ogal chicken: S, Hy-Line Brown: H, White Leghorn: W). Genetic diversity indices including mean allele number among loci, unbiased heterozygosity ($h_i$) within locus, effective number of alleles ($N_e$) and polymorphism information content (PIC) as well as the unbiased average heterozygosity (H) among loci in the populations were calculated using the generated allele frequencies by each marker. Frequencies of microsatellites markers were used to estimate heterozygosities and genetic distances. The nearest distance (0.119) was observed between the C and Y strains. The generated unbiased average heterozygosity among loci in each population was integrated to the global formula of CPD and the result demonstrated that the CPD within the six chicken populations was 99.461%.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.12
• /
• pp.77-86
• /
• 2012

We have carried out a series of numerical experiments to study the effect of average particle size on the mechanical properties of granite-derived weathered soils. A distinct-element method was adopted to study the changes in macro-scale mechanical properties with particle size and maximum-to-minimum particle size ratio. The numerical soil specimen with cohesion values of 0.25 MPa and internal friction angle of 29 degrees was prepared for reference. While keeping the porosity values constant, we varied particle size and size distribution to study how cohesion and internal friction angle changes. The experimental results show that the values of cohesion apparently decrease with increasing particle size. Changes in the values of internal friction angles are small, but there is a trend of increase in internal friction angle as the average particle size increases. This study demonstrates a possibility that the results of numerical experiments of this type may be used for rapid estimation of mechanical properties of granite-derived weathered soils. For example, when mechanical properties obtained through in situ tests and particle size data obtained through lab analysis are available for a site, it is expected that the mechanical properties of weathered granite soils with varying degrees of weathering (thus, varying particle size) may be estimated rapidly only with particle size data for that site.

• Economic and Environmental Geology
• /
• v.41 no.4
• /
• pp.453-464
• /
• 2008

This study is to examine a relation between coal mining subsidence occurrence at abandoned underground coal mines and underground goaf with respect to surface geology, subsurface structure, depth and thickness of coal beds and the distribution of drifts. A study is carried out at the site where susceptibility of coal mining subsidence was proven high in a previous study. In that previous study, the susceptibility of coal mining subsidence was spatially analyzed by GIS using digitized geological maps, investigation reports, digitized mining tunnel maps without consideration of subsurface structure and the multi-level arrangement of drifts. Here we analyze geological characteristics around the goaf and the distribution of coal seam based upon digitized geological maps and investigation reports on the study area. And digitized mining tunnel maps are also used to analyze the depth and multi-level arrangement of drifts. The results show that weakened surface rock strength, relatively shallow depth and large thickness of coal seam below the surface are closely related to the coal mining subsidence occurrence. Complicatedly inter-connected drifts, shallow depth of drifts and surface rock fractures are revealed as additional control factors affecting coal mining subsidence. These factors examined in this study as well as original factors should be taken into account for the quantitative estimation of coal mining subsidence occurrence at abandoned underground coal mine.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.4
• /
• pp.54-61
• /
• 2005

An aquifer thermal energy storage (ATES) system can be very cost-effective and renewable energy sources, depending on site-specific parameters and load characteristics. In order to develop the ATES system which has certain hydrogeological characteristics, understanding the thermohydraulic process of an aquifer is necessary for a proper design of an aquifer heat storage system under given conditions. The thermohydraulic transfer for heat storage was simulated according to two sets of simple pumping and waste water reinjection scenarios of groundwater heat pump system operation in a two-layered aquifer model. In the first set of the scenarios, the movement of the thermal front and groundwater level was simulated by changing the locations of injection and pumping wells in a seasonal cycle. However, in the second set the simulation was performed in the state of fixing the locations of pumping and injection wells. After 365 days simulation period, the shape of temperature distribution was highly dependent on the injected water temperature and the distance from the injection well. A small temperature change appeared on the surface compared to other simulated temperature distributions of 30 and 50 m depths. The porosity and groundwater flow characteristics of each layer sensitively affected the heat transfer. The groundwater levels and temperature changes in injection and pumping wells were monitored and the thermal interference between the wells was analyzed to test the effectiveness of the heat pump operation method applied.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.349-357
• /
• 2017

The environmental problems affecting marine resources and slow growth in the fisheries industry is causing many countries to look for alternative inputs that can boost the fisheries sector. This study focuses on the effects of technological innovation in the fisheries industry on the gross domestic product (GDP) per capita across Organization for Economic Cooperation and Development (OECD) countries. Using a panel dataset, this study attempts to estimate the different effects of technological innovations in the fisheries industry from country to country using the differences-in-differences (DiD) method. After the DiD method, the Granger causality test is applied to determine the interactive relations between economic growth and the selected variables associated with technological innovation in the fisheries industry, such as government spending on fisheries R&D, the number of patents in fisheries, and employment. The results obtained from the DiD estimation show that government spending on fisheries R&D, fisheries technology development, and fisheries employment positively influences the GDP per capita across OECD counties. From the causality test, we found different bi-directional causal relationships between the GDP per capita and (spending) on fisheries technology development across countries.

• Journal of Korean Society of Forest Science
• /
• v.90 no.6
• /
• pp.692-698
• /
• 2001

This study has been carried out to estimate aboveground biomass and net primary production(NPP) in an average 41-years-old Quercus variabilis stand of Gongju area, 45-years-old Quercus variabilis stand of Pohang area, and 54-years-old Quercus variabilis stand of Yangyang area. Ten sample trees were cut in each forest and soil samples were collected in July to August, 2000. Estimation for aboveground biomass and net primary production were made by the equation model $Wt=aD^b$ where Wt is oven dry weight in kg and D is DBH in cm. Total aboveground biomass was 91.31ton/ha in Gongju area, 207.6ton/ha in Pohang area, and 71.39ton/ha in Yangyang area. The aboveground biomass 207.6ton/ha in Pohang area is the highest biomass production among the amount of biomass in Quercus variabils stands reported in Korea. The proportion of each tree component to total aboveground biomass was high in order of bolewood, bolebark, branches and leaves in the three forests. Aboveground total net primary production was estimated at 7.8ton/ha in Gongju area, 11.5ton/ha in Pohang area, and 6.40ton/ha in Yangyang area. There were at least 2 times higher total aboveground biomass in Pohang area than in the Gongju and Yangyang areas because of climate difference among the study areas.

• Korean Journal of Remote Sensing
• /
• v.12 no.2
• /
• pp.169-198
• /
• 1996

The objectives of this investigation are : 1. To analyze spectral signature and the associated vegetation index for geometric illumination conditions inf1uenced by low solar elevation and high slope orientations in mountainous forest. 2. To assess the accuracy of the spectral angle mapper classification for the a winter land cover in comparison with the maximum likelihood classification. 3. To produce the image of water quality and water properties that could be used to estimate the water pollution sources and the tide-included by turbid water in estuarine and coastal areas. These objectives are to characterize environmental and ecological monitoring applications of the Nak-Dong River Basin by using Fuyo-1 OPS VNIR data acquired on December 26, 1992. The results of this paper are as follows : 1. The spectral digital numbers and vegetation indexes (NDVI and TVI) of mountainous forest are higher on the slope facing the sun than on the slope hidden the sun under low sun elevation condition. 2. The spectral angle mapper algorithm produces a more accurate land cover classification of areas with steep slope, various aspects and low solar elevation than the maximum likelihood classifier. 3. The maximum likelihood classification images can be used for identifying the location and movement of both freshwater and salt water, regardless of geometric illumination conditions. 4. The color-coded density sliced image of selected water bodies by using the near-infrared band 3 can provide distribution of the water quality of the Lower Nak-Dong River. 5. The color-coded normalized difference vegetation index image of the selected mountain forest is suitable to classify winter vegetation cover types, i.e., forest canopy densities for slope orientations.