• 제목/요약/키워드: Resonator Design

검색결과 545건 처리시간 0.023초

나노 공진기의 1차 고유진동수에 미치는 링클 영향 연구 (Study of Wrinkle Effect on Primary Natural Frequency of Nano-resonator)

  • 윤주일;강상욱
    • 한국소음진동공학회논문집
    • /
    • 제22권12호
    • /
    • pp.1157-1163
    • /
    • 2012
  • Natural frequency of a nano-resonator via nano transfer printing is studied. Through a nano transfer printing, the hybrid metal/polymer membrane may evolve a wrinkle. Natural frequency of a wrinkled hybrid membrane decreases significantly, as the amplitude to wavelength ratio becomes larger. To address the design limit of a hybrid nano resonator, we perform parametric study using finite element analysis. Specifically, we study the effects of the Young's modulus ratio of the metal/polymer membrane, thickness ratio and wrinkle amplitude to wavelength ratio, respectively. The results from the parametric studies can serve as guideline to design hybrid nano resonators.

$\lambda/4$ Hairpin 공진기를 이용한 2.4GHz 대역 LTCC 대역통과 여파기의 설계 (The Design of 2.4GHz Band LTCC Bandpass Filter using $\lambda/4$ Hairpin Resonators)

  • 성규제;최재우;박현식;박장환;여동훈
    • 한국마이크로전자및패키징학회:학술대회논문집
    • /
    • 한국마이크로전자및패키징학회 2003년도 기술심포지움 논문집
    • /
    • pp.260-264
    • /
    • 2003
  • In this paper, a $\lambda/4$ hairpin resonator is proposed to reduce the size of planar resonators for a LTCC MLC bandpass filter. The $\lambda/4$ hairpin resonator operates as stepped impedance resonator (SIR) without changing the width of the planar resonator. It is composed of two sections those are parallel coupled line and transmission line. The characteristic impedance of two sections is different each other. The design formulas of the bandpass filter using the coupling element at the arbitrary position are derived from even and odd-mode analysis. The formulas can take account of the arbitrary coupling of lumped ana/or distributed resonators. The advantage of this filter is its abilities to change freely the coupling structure between two resonators. Experimental bandpass filters for 2.4GHz Band are implemented and their performances are shown.

  • PDF

Design of a Dual-Band Bandpass Filter Using an Open-Loop Resonator

  • Im, Hyun-Seo;Yun, Sang-Won
    • Journal of electromagnetic engineering and science
    • /
    • 제17권4호
    • /
    • pp.197-201
    • /
    • 2017
  • In this paper, we present a novel design for a dual-band bandpass filter (BPF) based on the conventional second-order, open-loop BPF. By adding series resonant circuits to the open ends of the resonator, we can create two resonant modes from the even and odd modes. One pair of the even and odd modes constitutes the upper passband, while the other pair constitutes the lower passband. By adding another series resonant circuit to the open-loop resonator, we can control the bandwidth of either the upper passband or the lower passband. We can replace the series resonant circuits with simple microstrip line resonators. A dual-band BPF working at both Wi-Fi bands (2.4 GHz and 5.8 GHz bands) is designed based on the proposed method and is tested. The measured and simulated results show excellent agreement.

유전체 공진기 필터의 결합창 특성해석 (Analysis of Coupling Windows of the Dielectric Resonator Filter)

  • 김병욱;윤두일;윤상원
    • 한국전자파학회논문지
    • /
    • 제13권1호
    • /
    • pp.101-105
    • /
    • 2002
  • 본 논문에서는 결합창으로 결합을 구현한 유전체 공진기 필터의 결합창 특성을 해석하였다. 결합창의 특성을 결합계수로 표현하였으며, 간단한 표현식으로 유도하였다. 결합창의 크기를 변화시키면서 해석 방법을 적용하여 결합계수를 계산하였고, 측정결과와 비교하여 해석의 유효성을 증명하였다. 본 논문에서 제안한 방법은 적용이 간단할 뿐 아니라, 결합창의 제작 및 측정오차 범위에서 정확한 결과를 보였다. 본 논문에서 제안한 방법은 유전체 공진기 필터의 설계 및 유전체 공진기와 Varactor diode로 이루어지는 동조필터가 동조주파수 대역에서 일정한 통과대역폭을 가지기 위한 최적화된 결합창의 설계 적용이 가능하다.

이중공진을 사용한 적층기판용 광대역 안테나 설계 (A Wide-band Multi-layer Antenna Design using Double Resonance)

  • 이국주;장미선;이정언;한명우;김문일
    • 전기학회논문지
    • /
    • 제60권2호
    • /
    • pp.431-434
    • /
    • 2011
  • In this paper, bandwidth enhanced design of dielectric resonator antenna fabricated in multi-layer substrate is introduced. The proposed dielectric resonator antenna is operating with fundamental TE101 mode and higher-order TM111 mode. Each resonance frequency is dependent on resonator dimensions. As increasing the height of radiating aperture, the higher-order TM111 mode resonance frequency approach the fundamental TE101 mode resonance frequency and the antenna bandwidth increase by double resonance. Three different aperture height size antennas that operated at 7GHz are fabricated in FR4 multi-layer substrate. Measured 10 dB matching bandwidth is 8 percent for single resonace antenna and 18 percent for double resonance antenna.

Design and Optimization of Four Element Triangular Dielectric Resonator Antenna using PSO Algorithm for Wireless Applications

  • Dasi swathi
    • International Journal of Computer Science & Network Security
    • /
    • 제23권10호
    • /
    • pp.67-72
    • /
    • 2023
  • This paper portrays the design and optimization of a wideband four element triangular dielectric resonator antenna (TDRA) using PSO. The proposed antenna's radiation characteristics were extracted using Ansoft HFSS software. At a resonant frequency of 5-7 GHz, the four element antenna provides nearly 21 percent bandwidth and the optimized gives 5.82 dBi peak gain. The radiation patterns symmetry and uniformity are maintained throughout the operating bandwidth. for WLAN (IEEE 802.16) and WiMAX applications, the proposed antenna exhibits a consistent symmetric monopole type radiation pattern with low cross polarisation. The proposed antenna's performance was compared to that of other dielectric resonator antenna (DRA) shapes, and it was discovered that the TDRA uses a lot less radiation area to provide better performance than other DRA shapes and PSO optimized antenna increases the gain of the antenna

재구성 슬릿 그라운드 공진기를 이용한 노트북용 자기공진형 무선전력전송 (Magnetic Resonant Wireless Power Transfer Using Reconfigurable Slit Ground Resonator for Laptop Computer)

  • 강석현;정창원
    • 한국전자파학회논문지
    • /
    • 제28권1호
    • /
    • pp.69-75
    • /
    • 2017
  • 본 논문에서는 자기공진형 무선전력전송의 실용화에 있어, 공진기 간 자기결합을 방해하는 그라운드 문제를 해결하기 위해 슬릿 구조를 설계하고, 커패시터를 연결하여 공진기로써의 성능을 기본적인 루프형의 수신 공진기와 비교하였다. 제안된 슬릿 그라운드 공진기(slit ground resonator)는 가로 31 cm, 세로 20.5 cm, 두께 $35{\mu}m$의 구리박판에 넓이 1 cm의 슬릿을 한 방향이 열린 십자 형태로 설계하였으며, 열린 방향 양단에 6.78 MHz에서 공진하도록 최적의 커패시터가 연결되어 공진기 역할이 가능하다. 수신 공진기는 스위치를 연결하여 열림형(open mode)과 닫힘형(short mode)일 때를 측정하고, 최고 전송효율을 표시하였다. 측정 결과, 수신 공진기가 루프 공진기일 때 가장 높은 전송효율을 보였다. 그러나 노트북 모델의 수신부에 그라운드를 삽입했을 때, 전송효율이 0 %에 가깝게 감소하였다. 반면, 슬릿 그라운드 공진기를 수신 공진기로 사용했을 때, 전송효율은 가장 높았던 루프 공진기의 67 % 회복하였다. 제안된 슬릿 그라운드 공진기는 슬릿을 통해 자기장을 통과시키며, 커패시터를 연결이 공진기로 동작하게 하여 주변 공진기 간 자기결합을 통해 전력을 전송해주는 역할을 수행한다.

환형 공명기가 설치된 소음기 설계 및 성능 시험 (Design and Performance Test of Silencers with Ring-shaped Resonators)

  • 김봉기;김상렬;이성현;이종화;이해성
    • 한국소음진동공학회논문집
    • /
    • 제21권4호
    • /
    • pp.357-364
    • /
    • 2011
  • In this study, ring-shaped acoustic resonators were proposed to be installed in a silencer to increase the acoustic performance of silencer in the low-frequency range. Evaluation of noise reduction performance of acoustic resonator arrays was carried out by measuring the random-incidence absorption coefficient. It was found that the absorption coefficient of resonator array was measured up to 1 at 125 Hz of 1/3-octave band center frequency. Insertion losses of silencers with ring-shaped acoustic resonator arrays were measured based on ISO 7235. The results were shown that the ring-shaped resonator could increase the insertion loss up to 13 dB without flow, whereas 7 dB when flow speed reached 15 m/s. As increasing the flow speed above 15 m/s, the effect of acoustic resonator decreased due to the effect of nonlinear air damping of the resonator. It was also found that the increment of pressure drop by the presence of resonator arrays was about 9 % at flow speed of 25 m/s.

나선형 공진기를 이용한 CPW 발진기 설계 (Design of a CPW Oscillator Using Spiral Resonators)

  • 구자경;임종식;한상민;안달
    • 한국산학기술학회논문지
    • /
    • 제10권10호
    • /
    • pp.2639-2645
    • /
    • 2009
  • 본 논문은 나선형 공진기를 이용한 CPW 발진기의 설계에 대하여 기술한다. CPW 나선형 공진기는 기존의 CPW 헤어핀, 헬리컬 공진기에 비하여 높은 Q 특성을 가지므로 출력특성과 크기가 개선된 발진기 설계에 유리하다. CPW 발진기 설계에 앞서 세 가지 CPW 공진기의 특성을 비교한다. EM 시뮬레이션을 행하여 공진기 설계 및 발진기 성능 확인에서의 정확도를 높였음을 보인다. 세 가지 CPW 공진기를 이용하여, 5.7 GHz 대역에서 각각 발진기를 설계하였다. 제작 및 측정 결과, 헬리컬, 헤어핀, 나선형 공진기를 이용한 각각 CPW 발진기의 측정된 출력은 각각 2.55 dBm, 2.64 dBm, 4.98 dBm이다. 한편 세 가지 공진기는 각각 $102.15mm^2,\;130.05mm^2,\;80.625mm^2$ 크기를 보여, 제안한 CPW 나선형 공진기가 다른 공진기에 비해 크기 감소 효과도 우수함이 제시된다.

중계국용 DR(Dielectric Resonator) 세라믹 대역통과 필터 설계 및 시뮬레이션 (Design and Simulation of the DR(Dielectric Resonator) Ceramic Band-Pass Filter for Basestation)

  • 김지균;이헌용
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 하계학술대회 논문집 D
    • /
    • pp.1922-1924
    • /
    • 1999
  • The purpose of this study is to establish the design theory of a DR ceramic bandpass filter used for basestations and to research on the design theory of bandpass filter. The design procedure is circuit parameters and structural parameters will be derived. It was observed that the filter characteristics at the simulations.

  • PDF